Dell 1526 user manual

User manual for the device Dell 1526

Device: Dell 1526
Size: 1,59 MB
Date of adding : 2013-04-10 17:50:18
Number of pages: 51
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Dell 1526. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Dell 1526.

For your convenience

If looking through the Dell 1526 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manualDell 1526 on full screen, use the buttonFullscreen.
  • Downloading to your computer - You can also download the user manual Dell 1526 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Dell 1526 user manual
Advertisement
« Page 1 of 51 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Dell 1526 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Dell 1526. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Dell™ Inspiron™ 1525/1526 Service Manual 
Before You Begin Speaker Assembly
Subscriber Identity Module (Optional) Palm Rest
ExpressCards ExpressCard Cage
Using the Memory Card Reader Processor Thermal-Cooling Assembly
Optical Drive Processor Module
Hard Drive Wireless Mini-Cards
Center Control Cover System Board Assembly
Internal Card With Bluetooth® Wireless Technology Coin-Cell Battery
Keyboard Battery Latch Assembly
Button Board Flashing the BIOS
Memory Pin Assignments for I/O Conn

Summary of the content on the page No. 2

Back to Contents Page   Before You Begin Dell™ Inspiron™ 1525/1526 Service Manual    Recommended Tools   Before Working Inside Your Computer This document provides procedures for removing and installing the components in your computer. Unless otherwise noted, each procedure assumes that: l  You have performed the steps in Before Working Inside Your Computer. l  You have read the safety information in your Dell Product Information Guide. l  When replacing a component, you have a

Summary of the content on the page No. 3

7. Slide the battery release latch until they click into place.   8. Slide the battery out of the battery bay. 1 battery 2 battery release latch   9. Turn the computer top-side up, open the display, and press the power button to ground the system board. Back to Contents Page  

Summary of the content on the page No. 4

Back to Contents Page   Flashing the BIOS Dell™ Inspiron™ 1525/1526 Service Manual    Flashing the BIOS From a CD   Flashing the BIOS From the Hard Drive If a BIOS-update program CD is provided with a new system board, flash the BIOS from the CD. If you do not have a BIOS-update program CD, flash the BIOS from the hard drive.  Flashing the BIOS From a CD NOTICE: Plug the AC adapter into a known good power source to prevent a loss of power. Failure to do so may cause system damage

Summary of the content on the page No. 5

9. Double-click the file icon on the desktop and follow the instructions on the screen. Back to Contents Page  

Summary of the content on the page No. 6

Back to Contents Page   Internal Card With Bluetooth® Wireless Technology Dell™ Inspiron™ 1525/1526 Service Manual    CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: To help prevent damage to the syste

Summary of the content on the page No. 7

Back to Contents Page   Button Board Dell™ Inspiron™ 1525/1526 Service Manual    CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: To help prevent damage to the system board, you must remove the battery

Summary of the content on the page No. 8

Back to Contents Page   Using the Memory Card Reader Dell™ Inspiron™ 1525/1526 Service Manual    Removing a Memory Card or Blank   CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: Use the memory card configuration utility (click the icon in the notification area) to select a card and stop it from functioning before you remove it from the computer. If you do not stop the card in the configurati

Summary of the content on the page No. 9

Back to Contents Page   Center Control Cover Dell™ Inspiron™ 1525/1526 Service Manual    CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: To help prevent damage to the system board, you must remove the

Summary of the content on the page No. 10

NOTICE: The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the keyboard. 1 screws (2) 2 keyboard 3 keyboard tabs (5) 4 keyboard cable 5 keyboard connector latch 6 media control buttons connector   8. Lift the keyboard and hold it up and slightly forward to access to the media control buttons connector.   9. Disconnect the media control buttons connector and remove the media control buttons cable.  

Summary of the content on the page No. 11

Back to Contents Page   Coin-Cell Battery Dell™ Inspiron™ 1525/1526 Service Manual    Removing the Coin-Cell Battery   Replacing the Coin-Cell Battery  Removing the Coin-Cell Battery   CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.   1. Follow the instructions in Before You Begin.   2. Remove all memory module (see Removing Memory Module).   3. Remove the hard drive (see Removing the Ha

Summary of the content on the page No. 12

 Replacing the Coin-Cell Battery   CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.   1. Hold the coin-cell battery with the positive side up.   2. Slide the coin-cell battery into the slot and gently press until it snaps to the slot.   3. Follow the steps in Removing the Coin-Cell Battery in the reverse order. Back to Contents Page  

Summary of the content on the page No. 13

Back to Contents Page   Processor Module Dell™ Inspiron™ 1525/1526 Service Manual    Removing the Processor Module   CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.   1. Follow the instructions in Before You Begin.   2. Remove the processor thermal-cooling assembly (see Removing the Processor Thermal-Cooling Assembly). NOTICE: To avoid damage to the processor, hold the screwdriver so that it is perpendicul

Summary of the content on the page No. 14

When the processor module is properly seated, all four corners are aligned at the same height. If one or more corners of the module are higher than the others, the module is not seated properly. 1 ZIF-socket cam screw 2 ZIF socket 3 pin-1 corner     NOTICE: To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.   2. Tighten the ZIF socket by turning the cam screw clockwise to secure the processor module to the syst

Summary of the content on the page No. 15

Back to Contents Page   Processor Thermal-Cooling Assembly Dell™ Inspiron™ 1525/1526 Service Manual    Removing the Processor Thermal-Cooling Assembly   CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.   1. Follow the instructions in Before You Begin.   2. Turn the computer over.   3. Remove the eight captive screws securing the back cover and remove the module cover. 1 module cover 2 captive screws

Summary of the content on the page No. 16

  CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.   1. Align the five captive screws on the processor thermal-cooling assembly with the screw holes on the system board.   2. In sequential order, tighten the five captive screws to secure the processor thermal-cooling assembly to the system board.   3. Replace the module cover and tighten the eight captive screws. Back to Contents Page  

Summary of the content on the page No. 17

Back to Contents Page   Display Dell™ Inspiron™ 1525/1526 Service Manual    Display Assembly   Display Bezel   Display Panel   Camera and Microphone Assembly  Display Assembly   Removing the Display Assembly   CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.   1. Follow the instructions in Before You Begin.   2. Loosen the eight captive screws on the back cover and remove the cover.   3. Disconne

Summary of the content on the page No. 18

  8. Disconnect the display cable from the connector.   9. Disconnect the camera cable from the connector. 1 display cable 2 camera cable   10. Pull the antenna cables from the routing hole and release them from the routing channel.   11. Remove the four screws from the display assembly hinges. 1 display assembly 2 antenna cables 3 camera cable 4 display cable 5 Hinge screws (4)       12. Lift the display assembly out of the computer.   Replacing the Disp

Summary of the content on the page No. 19

NOTE: Ensure that the display cable, camera cable, and antenna cables are properly routed and secured beneath the plastic tabs.   6. Connect the display cable to the display cable connector on the system board.   7. Connect the camera cables to the camera cable connector on the system board.   8. Replace the keyboard (see Replacing the Keyboard).   9. Replace the center control cover (see Replacing the Center Control Cover).   10. Close the display and turn the computer

Summary of the content on the page No. 20

remainder of the bezel.   Replacing the Display Bezel   CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.   1. Follow the instructions in Before You Begin.   2. Starting at any corner, use your fingers to gently snap the bezel into place to secure it to the display panel.   3. Replace the captive screw and five shoulder screws around the display bezel.   4. Replace the six rubber display bumpers around t


Similar user manuals
# User manual Category Download
1 Dell 1090 Laptop 115
2 Dell 1120 Laptop 19
3 Dell 1011 Laptop 23
4 Dell 1088 Laptop 15
5 Dell 1018 Laptop 10