Dell PowerEdge SL200 user manual

User manual for the device Dell PowerEdge SL200

Device: Dell PowerEdge SL200
Size: 0,24 MB
Date of adding : 2013-02-28 17:51:53
Number of pages: 18
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Dell PowerEdge SL200. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Dell PowerEdge SL200.

For your convenience

If looking through the Dell PowerEdge SL200 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manualDell PowerEdge SL200 on full screen, use the buttonFullscreen.
  • Downloading to your computer - You can also download the user manual Dell PowerEdge SL200 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Dell PowerEdge SL200 user manual
Advertisement
« Page 1 of 18 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Dell PowerEdge SL200 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Dell PowerEdge SL200. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1


  

 




 

Summary of the content on the page No. 2

        Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, notices, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system.                  

Summary of the content on the page No. 3

 PowerEdge Cluster SE100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Windows 2000 Advanced Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Windows NT 4.0 Server, Enterprise Edition. . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Windows NT 4.0 Service Pack Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Adding Peripherals Required for PowerEdge 2300, 4300, or 4350 . . . . . . .

Summary of the content on the page No. 4

iv

Summary of the content on the page No. 5

            ® ® This guide provides the latest information on using Microsoft Windows NT ® Server 4.0, Enterprise Edition operating system and Windows 2000 Advanced Server operating system for the following Dell PowerEdge Cluster products and components:  Dell PowerEdge Cluster SE100 — Servers: PowerEdge 2300, 4300, 4350, 6300, and 6350 — Storage: PowerVault™ 200S, 201S, 210S, and 211S — Cluster interconnect: Fast Ethernet  Dell PowerEdge

Summary of the content on the page No. 6

   The PowerEdge Cluster SE100 supports clustering with Windows NT Server 4.0, Enterprise Edition or Windows 2000 Advanced Server. See the following sections for information on supported configurations and service packs (SPs) for your Windows operating system.    Installation instructions for hardware configurations using Windows 2000 Advanced Server can be found in the Dell PowerEdge Cluster SE100, SE200, and SL200 Installation and Troubleshoo

Summary of the content on the page No. 7

     Windows NT SP 6.0a or later is recommended for PowerEdge Cluster SE100 systems. NOTE: Both nodes must be configured with similar drivers (network interface control- lers [NIC], redundant array of independent disks [RAID] controller, and so on), utilities (Dell OpenManage™ suite, PowerConsole, and so on), firmware (PowerEdge Expand- able RAID Controller 2/SC [PERC 2/SC]), and the latest basic input/output system [BIOS] for each system. When planning for and

Summary of the content on the page No. 8

   !"# $'% '%& $ %&'              ()    "      *                #  The following list provides PCI slot assignment information for buses, RAID control- lers, NICs, and a DRAC 2.  PCI buses — PCI bus 1: PCI slots 1 through 3 are 32-bit, 33-megaher

Summary of the content on the page No. 9

   Installation instructions for hardware configurations using Windows 2000 Advanced Server can be found in the Dell PowerEdge Cluster SE100, SE200, and SL200 Installation and Troubleshooting Guide. Your PowerEdge Cluster SE200 and SL200 system supports the following PowerEdge servers as cluster nodes in homogeneous pairs (same server) with Windows 2000 Advanced Server:  PowerEdge 2400  PowerEdge 2450  PowerEdge 4400  PowerEdge 6400  PowerEdge 6450  PowerEdge

Summary of the content on the page No. 10

 PowerEdge 6450 - 6350  PowerEdge 8450 - 6350  PowerEdge 8450 - 6450      Windows NT SP 6.0a or later is recommended for PowerEdge Cluster SE200 and SL200 systems. NOTE: Both nodes must be configured with similar drivers (NIC, RAID controller, and so on), utilities (Dell OpenManage suite, PowerConsole, and so on), firmware (PERC 2/DC), and the latest BIOS for each system. When planning for and testing your heterogeneous configurations, ensure that ade- quate

Summary of the content on the page No. 11

 RAID controllers — RAID controllers can be installed in any available PCI slot. — If you use multiple RAID controllers and there are slots available, Dell recom- mends installing the RAID controllers on separate PCI buses to balance the load on the system. — If you are not currently using a DRAC 2 and do not plan to use one in the future, Dell recommends that you install one RAID controller in the 32-bit slot, even if it is a 64-bit RAID controller.  NICs — You can install NICs in any avai

Summary of the content on the page No. 12

 NICs — NICs can be installed in any available PCI slot. Dell recommends that Giganet cLAN adapters be installed in PCI slots 1 or 2.  DRAC 2 — If you are currently using a DRAC 2 or plan to use one in the future, install it in PCI slot 2. NOTES: If you plan to use a DRAC 2, one PCI slot is available for a PERC 2/DC RAID controller for shared storage. To make sure that the SCSI or RAID controller attached to the boot drives initializes first, you may have to change the scan order of the PC

Summary of the content on the page No. 13

 DRAC 2 — If you are currently using a DRAC 2 or plan to use one in the future, install it in PCI slot 7. NOTE: To make sure that the SCSI or RAID controller attached to the boot drives initializes first, you may have to change the scan order of the PCI bus, if the BIOS supports this option, or change the order of the RAID, NIC, and DRAC 2. Performing these tasks ensures that Windows numbers the boot drives in the proper sequence.    !"# $'  '&+

Summary of the content on the page No. 14

   !"# $-& !   $ %&'              ()    "      *                #  The following list provides PCI slot assignment information for the system’s PCI buses, RAID controllers, NICs, and DRAC 2.  PCI buses — PCI bus 1: PCI slots 1 and 2 are 6

Summary of the content on the page No. 15

   !"# $%%.. '%.. !  There are no PCI slot requirements or restrictions.          The following forms can be attached to the back of each cluster node or rack and may be used by the system installer to record important information about the hardware on each cluster component. In addition, have a copy of the form available any time you call Dell for technical support. Record the fo

Summary of the content on the page No. 16

      Cluster Type PowerEdge Cluster SE100 Cluster Name Installer Date Installed Applications Location Notes Node PowerEdge Server Model Windows NT Name Node 1 Node 2 Storage Array Description (Drive letters, RAID types, applications/data installed) Storage 1 Storage 2 Component: Node 1 Node 2 Storage 1 1 Storage 2 2 Service Tag System Storage 1 Storage 2 Node 1, controller 1 Node 2, controller 1 Node 1, controller 2 Node 2, controller 2 Usage (Public Net

Summary of the content on the page No. 17

      Cluster Type PowerEdge Cluster SE200 or SL200 Cluster Name Installer Date Installed Applications Location Notes Node PowerEdge Server Model Windows NT Name Node 1 Node 2 Storage Array Description (Drive letters, RAID types, applications/data installed) Storage 1 Storage 2 Storage 3 Storage 4 Node 1 Node 2 Storage 1 Storage 2 Storage 3 Storage 4 Component: Service Tag System Storage 1 Storage 2 Storage 3 Storage 4 Node 1, controller 1 Node 2, co

Summary of the content on the page No. 18

1-14 Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide


Similar user manuals
# User manual Category Download
1 Dell 1090 Laptop 153
2 Dell 1120 Laptop 25
3 Dell 1011 Laptop 27
4 Dell 1088 Laptop 10
5 Dell 1018 Laptop 12