Our goal is to provide you with a quick access to the content of the user manual for Lenovo 3000H. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Lenovo 3000H.
If looking through the Lenovo 3000H user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Lenovo 3000H but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Lenovo 3000H. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Lenovo 3000H User Guide
cover.indd 2 2006.9.15 5:10:09 PM
Explanation on Marks Danger: Watch out for high risks Caution: Watch out for medium risks Attention: Pay attention to low risks Recommendation: Helpful tips Prohibited: Dangerous operations
Contents Explanation on Marks Chapter 1 Instruction for Use of Computer Hardware ...................... 1 1.1 Front View of the Chassis .............................................................. 2 1.2 Back View of the Chassis............................................................... 3 1.3 Connection of the speaker ............................................................. 4 1.4 Helpful tips on computer cabling and installation .......................... 5 1.5 Keyboard ...............
1 Chapter 1 Instruction for Use of Computer Hardware 1 This chapter will mainly introduce contents as follows: Front view of the chassis (Instruction for use of buttons and functional keys on the front panel of the chassis) Rear view of the chassis (Instruction for use of all I/O connectors on the rear 2 panel of the chassis) Connection method of the speaker Keyboard Hardware Notice 3 This chapter will describe some necessary operation for the use of computers, including the method and helpf
1.1 Front View of the Chassis (Instruction for use of buttons and functional keys on the front panel of the chassis) F-1 [1-1] [1-2] [1-3] [1-4] F-2 F-1 The top button [1-1] Reset Key: Press this key to restart computer forcibly. It is recommended to take this operation with caution. [1-2] Hard Disk Drive Indicator: Indicates read/write operations of the hard disk. [1-3] Power Switches: Press this key to turn on/off computers. F-2 Preposition Digital Panel: Open the preposition digital panel and
1.2 Back View of the Chassis (usage of all I/O connectors on the rear panel of the chassis) The rear panel connectors of some models are as illustrated below, please refer to them according to your actual configuration; —— Power connector: Used to connect the mainframe to the power supply —— PS/2 mouse connector: Used to connect PS/2 mouse —— PS/2 keyboard connector: Used to connect PS/2 keyboard —— Serial port: Used to connect devices with serial port (COM port) —— Parallel port: Used to connec
—— External graphics card connector: Used to output monitor signals (VGA signals) through the signal cable connected with the monitor. If the graphics card is equipped with S-Video connector and cabled to a TV, pictures displayed on the monitor screen may be redirected to the TV (some models are equipped with external graphics card). —— Used to attach your computer to a telephone line for modem use. (some models equipped with this connector) —— Used to attach a telephone line to your computer fo
1.4 Helpful tips on computer cabling and installation C-3 C-2 C-1 C-1 Monitor power cord C-2 Monitor data cable C-3 Speaker audio signal cable Note: 1. Keep speakers away from monitor to avoid magnetic interference. 2. Ensure the cables between monitor and mainframe are securely connected and the screws on the connector of monitor signal cable are tightened. 3. Connect the monitor signal cable to the onboard graphics card connector if the model you purchase is not equipped with stand-alone graph
Hotkey1, 2, 3——Provide you shortcut keys to start up the program you defined in advance. Recovery——If the computer provide the Recovery function, Press this key when “LENOVO” displayed on the start screen. In Windows system, the key “Recovery” acts as the “Hotkey” key. The method of defining the shortcut key: First step Press one of the shortcut keys ,the opposite Hotkey setting dialog box displays.You can define the key's function. Second step Enter executive program name in the “Application”
2 Chapter 2 System Installation 1 This chapter provides the following: OneKey Recovery By using the OneKey Recovery function, it will restore your C partition back to the 2 orginal factory default or to the most recent backup saved. All data inthe C partition will then be erased. Other partitions in the hard disk will not change. Note: Your C partition must use the FAT32 partition 3 format to successfully use the OneKey Recovery function. 4 5 Lenovo 3000H User Guide 7
2.1 One-Key Recovery System Recovery Launch the System Recovery feature by Press the “Recovery” key on the keyboard,when “LENOVO” displayed on the start screen.selecting “System Recovery”. Note: System Recovery will overwrite all of the data in drive C; please backup relevant data before performing system recovery to prevent your important data from missing. System Recovery Follow the onscreen instructions, and press “E” on the keyboard to start recovery if you are sure to recover. Lenovo 3000H
System Recovery Please wait in the process of system recovery. Do not interrupt the operation. System Recovery System Recovery After the system is recovered successfully, the software prompts to restart the computer. Restart the computer and enter the system. System Backup This software provides the feature to backup data currently in drive C. Select System Backup. Note: 1. Notice that you will overwrite the backup in the hidden partition created for factory delivery or the last backup created w
System Backup Press “E” and continue if you are sure to backup. System Backup The backup operation will obtain enough space by adjusting the data at the end of the hard disk; press “E” and continue if you are sure to backup. Follow the onscreen instructions, and press “E” on the keyboard to start backup if you are sure to backup. Lenovo 3000H User Guide 10
System Backup Please wait in the process of system backup. It is not recommended to interrupt the operation, if possible. System Backup After the system is backed up successfully, the software prompts to restart the computer. Restart the computer and enter the system. System Backup If the System Backup prompt is as shown: There is not enough space for backup! You need to adjust your harddisk space to release enough unallocated space at the end of harddisk. Note: The unallocated space should exce
Space Release Enter “Computer Management” in the “Control Panel”. Delete partition at the end of the harddisk to get enough space. Note: Please make sure to backup all your data before performing space release. If this is not done, all data in the released space will be lost. System Backup Then startup “System Backup” to backup the current data in the C partition. New Partition • After system backup, Right Click on “My Computer” Click on “Manage”. • Now click on “Disk management” in the list, Ri
New Partition Select “Extended partition”. Then click “Next”. New Partition Fill in the Partition size in MB. New Partition Click “Finish” to complete the new partition establishment. Lenovo 3000H User Guide 13
Backup Uninstallation You may release the backup space by performing “backup uninstallation” if you no longer need the backup information. Select “Backup Uninstallation” from the Backup screen. Backup Uninstallation Perform uninstallation by clicking “E” after confirmation. Note: Some space released becomes free space and cannot be merged to the last partition. Backup Uninstallation Back uninstallation complete.Press any key to reboot. Lenovo 3000H User Guide 14
Help Press key ( R ) or ( r ) to select “Help”,and press key “Enter” to confirm. You can get helpful tips about how to use the OneKey Recovery function. Lenovo 3000H User Guide 15
Lenovo 3000H User Guide 16
3 Chapter 3 The introduction on usage of software 1 This chapter provides the following: The methods of using WinDVD The method of burning optical discs. The usage of anti-virus software. 2 Note: 1. All the software interfaces follow the software provided with the computer you purchased. 3 2. The burning function described in this chapter is only applicable to the computers equipped with the rewritable optical drives. 3. If you have any question about Norton AntiVirus,please refer to the fol