Summary of the content on the page No. 1
Supplemental Setup and Operating
Instructions and Illustrated Parts Lists
for Ferris Zero-Turn Riding Mowers Using
Propane Fuel
Model Description
5900690 IS3100ZBVP3261, Zero-Turn Riding Mower w/ Propane Fuel
5900691 IS3100ZBVP32, Zero-Turn Riding Mower w/ Propane Fuel
5900789 IS3100ZBVP3261, Zero-Turn Riding Mower w/ Propane Fuel & 16cc Pumps
5900790 IS3100ZBVP32, Zero-Turn Riding Mower w/ Propane Fuel & 16cc Pumps
5900942 IS3100ZBVP3261HT, Zero-Turn Riding Mower w/ Propane Fuel & 16cc Pumps
Summary of the content on the page No. 2
This manual is intended to supplement the operator’s manual included with your machine. There is very important safety, operational and maintenance information in this manual. Read and understand all information in your operator’s manual and this supplement manual before attempting to operate this machine. Save these original instructions for future reference. Table of Contents Operator Safety .................................................. 1 Propane Mower Operating Procedures ........
Summary of the content on the page No. 3
Operator Safety Operator Safety WARNING Avoid serious injury or death from operating a mower using propane fuel. Follow mower P/N: 5103596 operating procedures, propane fuel and Decal, Warning, Vapor Valve propane fuel tank filling producedures. MOWER OPERATING PROPANE FUEL TANK FILLING PROCEDURES USING PROPANE PROCEDURES FUEL � A propane fuel tank is a cylinder designed to contain a liquefied petroleum gas (propane) Background under pressure that is highly flammable. Filling, � Fer
Summary of the content on the page No. 4
Features & Controls Instrument Control Panel Features & Controls (S/N: 2014953656 & Below) CONTROL FUNCTIONS The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section. Ground Speed Control Levers Seat Adjustment Lever These levers control the ground speed
Summary of the content on the page No. 5
Features & Controls FUEL TANK CONTROLS Parking Brake DISENGAGE Releases the parking brake. ENGAGE Locks the parking brake. Pull the parking brake lever back to engage the parking brake. Move the lever fully forward to disengage the parking brake. NOTE: To start the unit the parking brake must be engaged. Deck Lift Pedal, Cutting Height Adjustment Pin & Deck Lift Lock Lever These control the cutting height of the mower deck. Depress the pedal until it locks into the 5” (1
Summary of the content on the page No. 6
Operation Operation 6. After warming the engine, ALWAYS operate CHECKS BEFORE STARTING the unit at FULL THROTTLE when mowing. � Check that crankcase is filled to the full mark on In the event of an emergency the engine can be the dipstick. See the engine Operator’s Manual for stopped by simply turning the ignition switch instructions and oil recommendations. to STOP. Use this method only in emergency � Make sure all nuts, bolts, screws and pins are in situations. For normal engine sh
Summary of the content on the page No. 7
Regular Maintenance RE-INSTALLING THE PROPANE A TANKS NOTE: The propane tank should be installed on the unit so that the fuel shut-off valve and fuel level gauge are pointing toward the rear of the machine by the rear bumper. 1. Position the propane tank so that the tank positioning bracket (C, Figure 1) fits into the slots located on either side of the center slot. 2. Connect the fuel supply hose fitting (B) to the C tank. Turn the fuel supply hose fitting to the left to tighten th
Summary of the content on the page No. 8
Regular Maintenance 9. When you are done testing the system make sure LEAK TESTING THE FUEL SYSTEM that both fuel tank shut-off valves are CLOSED This procedure should only be used when trying to until you are ready to use the unit again. identify the location of a leak. 10. Wash off soapy residue with clean cold water and 1. Create a mixture of 50% water and 50% liquid towel dry. dishwashing soap. 11. Wait five minutes to allow all gas to evacuate the 2. OPEN the fuel tank shut-off va
Summary of the content on the page No. 9
Specifications SPECIFICATIONS TRANSMISSIONS: (Pumps) Specifications are correct at time of printing and are Hydro-Gear PJ-12: subject to change without notice. 12cc Pumps fit models: S/N: 2014192366 - 2014192366 Hydro-Gear PR-16: ENGINE: 16cc Pumps fit models: 37HP DFI Models: 2015308756 & Below; All other models: S/N: 2014192367 - 2015308756) Hydro-Gear PR-2HCC-GV1X-XXXX: Briggs & Stratton* S/N: 2015308757 & Above Make Briggs & Stratton Model 543577-0110-E1 (Wheel Motors) Displacement 54.62 Cu
Summary of the content on the page No. 10
Notes / Notas 8 www.ferrisindustries.com ES Not for Reproduction
Summary of the content on the page No. 11
Seguridad del Operador � Revise regularmente la tubería de suministro flexible. Seguridad del Operador Asegúrese de que esté en buenas condiciones. Reemplace los componentes dañados o que presenten fugas. ADVERTENCIA Evite sufrir lesiones graves o la muerte al operar un cortacésped con combustible de propano. Siga los procedimientos de operación del cortacésped, del combustible de propano y de llenado del depósito de combustible de propano. P/N: 5103596 Decal, Warning, Vapor Valve PR
Summary of the content on the page No. 12
Funciones y Controles Panel de instrumentos de control Funciones y Controles (S/N: 2014953656 & Abajo) FUNCIONES DE CONTROL La siguiente información describe brevemente la función de cada uno de los controles. Arrancar, detenerse, conducir y podar el césped requieren del uso combinado de varios controles que se aplican en secuencias específicas. Para aprender qué combinaciones y qué secuencia de controles deben usarse para diversas labores, sírvase leer la sección de OPERACIÓN. Control de
Summary of the content on the page No. 13
Funciones y Controles CONTROLES DEL DEPÓSITO DE Freno de mano COMBUSTIBLE QUITAR Con eso se quita el freno de mano. ACCIONAR Con eso se fija el freno de mano. Jale la palanca del freno de mano para accionar el mismo y mueva la palanca completamente hacia adelante para quitarlo. NOTA: Para arrancar la unidad, el freno de mano debe estar accionado. Pedal elevador de la cubierta, Pasador de ajuste de la altura de corte y Palanca de bloqueo del
Summary of the content on the page No. 14
Operación 5. Después de arrancar el motor, permitir que el Operación motor se caliente durante al menos un minuto antes de iniciar la toma de fuerza o cambiar la REVISIONES ANTES DE conducción del jinete. ARRANCAR Caliente el motor dejándolo correr al menos un minuto antes de activar el interruptor PTO o conducir � Revise que el aceite del cárter esté en la marca la unidad. de lleno de la varilla de nivel de aceite. Vea el Manual del operador del motor para obtener 6. Después de cale
Summary of the content on the page No. 15
Mantenimiento regular REINSTALACIÓN DE LOS A DEPÓSITOS DE PROPANO NOTA: El depósito de propano se debe instalar en la unidad para que la válvula de corte de combustible y el indicador de nivel de combustible apunten hacia la parte posterior de la máquina cerca del parachoques. 1. Coloque el depósito de propano de modo que el soporte de posicionamiento del depósito (C, Figura 1) encaje en las ranuras que se encuentran a cada lado de la ranura central. C 2. Conecte el accesorio de la
Summary of the content on the page No. 16
Mantenimiento regular 8. Repita los pasos 2 al 8 con la válvula de corte del PRUEBA DE FUGAS DEL SISTEMA depósito de combustible cerrada en el depósito DE COMBUSTIBLE de propano izquierdo y con la válvula de corte del depósito de combustible abierta en el depósito de Este procedimiento sólo se debe usar al intentar propano derecho. identificar la ubicación de una fuga. 9. Cuando termine de probar el sistema, asegúrese 1. Cree una mezcla de 50% de agua y 50% de jabón de que ambas válvu
Summary of the content on the page No. 17
Especificaciones ESPECIFICACIONES TRANSMISIONES: Bomba Las especificaciones son correctas al momento de la HydroGear PJ-12: impresión y están sujetas a cambios sin previo aviso. Modelos de bomba de 12cc: S/N: 2014192366 - 2014192366 Hydro-Gear PR-16: MOTOR Modelos de DFI: 2015308756 y Abajo; Pron otro modelos: S/N: 2014192367 - 2015308756 Briggs & Stratton Vanguard de 32 Bruto HP* Hydro-Gear PR-2HCC-GV1X-XXXX: Marca Briggs & Stratton 2015308757 y Arriba Modelo 543777-0120-E1 Motor Radial Carrer
Summary of the content on the page No. 18
6 , 28 Supplemental Parts List - Tank Mount Group Illustrated Parts Lists 25 3 19 21 18 19 4 19 20 10 18 18 20 5 , 27 15 9 14 19 17 8 11 2 18 20 22 20 RH side components Propane System Service Parts 18 4 19 20 18 7 20 23 18 19 12 3 1 16 www.ferrisindustries.com Not for Reproduction
Summary of the content on the page No. 19
Supplemental Parts List - Tank Mount Group REF NO. PART NO. QTY DESCRIPTION 1 5407570B 1 MOUNT, TANK MOUNT, PROPANE, RH - RED 2 5407592B 1 MOUNT, TANK MOUNT, PROPANE, LH - RED 3 5404213B 1 PLATE, BRACKET, REGULATOR MOUNT, PROPANE - RED 4 5403947B 2 PLATE, BRACKET, TANK MOUNT - RED 5 5403521B 1 WELD, TANK MOUNT - LH (S/N: 2014953566 & Below) 6 5403520B 1 WELD, TANK MOUNT - RH (S/N: 2014953566 & Below) 7 5023173 2 CLAMP, HOSE, 1” DIAMETER 8 5025013X8 8 BOLT, 3/8-16 X 1 GD5 YZ 9 5025156 8 WASHER, 3
Summary of the content on the page No. 20
Supplemental Parts List - Instrument Control Group 15 S/N: 2014953566 & Below 2 3 16 1 Oriented to be read from operator position. 4 7 12 6 5 20 14 10 8 9 13 11 S/N: 2014953567 & Above Oriented to be read from operator position. 21 22 25 24 23 Important Note: Unlabelled components are the same as above. 18 www.ferrisindustries.com Not for Reproduction
