Summary of the content on the page No. 1
LT324
TRIPLE TURF MOWER
CODE 924C
OPERATOR'S MANUAL
THIS MANUAL SHOULD BE REGARDED AS PART OF THE
MACHINE, AS IT GIVES ESSENTIAL INFORMATION REGARDING
MACHINE SAFETY, OPERATION AND SPECIFICATIONS.
English Version
FROM SERIAL NO: 924C001001 MANUAL PART NO: 924916(REV.0.)
Issue: 01.10.04
Summary of the content on the page No. 2
Summary of the content on the page No. 3
ATTENTION THIS SYMBOL MEANS BE ALERT! YOUR SAFETY IS INVOLVED READ THIS MANUAL BEFORE USING THE LT324 MOWER. IT IS ESSENTIAL THAT OPERATORS STUDY IT FOR THEIR OWN SAFETY. ALL OPERATORS SHOULD SEEK AND OBTAIN PROFESSIONAL AND PRACTICAL INSTRUCTIONS ON THE SAFE USE OF THE MOWER. THESE SERVICES ARE AVAILABLE THROUGH HAYTER LIMITED OR HAYTER APPROVED COMMERCIAL DEALERS.
Summary of the content on the page No. 4
1.4 CONTENTS 1.4 CONTENTS Page No. SAFETY PRECAUTIONS. 1.6 - 1.14 Training. 1.6 Preparation. 1.6 - 1.7 Operation. 1.7 - 1.9 Handling and storage of fluids. 1.10 Maintenance and storage. 1.11 Decals. 1.12 - 1.14 EC CONFORMITY INFORMATION. 1.15 - 1.16 Noise levels. 1.15 EC Declaration of Conformity. 1.16 INTRODUCTION. 1.17 SPECIFICATIONS. 1.18 - 1.24 Engine. 1.18 Transmission system. 1.19 Cutterhead drive system. 1.19 Cutterhead lift system and steering. 1.20 Hydraulic system. 1.20 Vehicle specif
Summary of the content on the page No. 5
1.5 1.5 CONTENTS CONTENTS Continued. Page No. Hourmeter. 1.33 Transmission neutral indicator light. 1.34 Cutterdeck drive switch indicator light. 1.34 Parking brake indicator light. 1.34 Hydraulic return filter indicator light. 1.34 Hydraulic transmission filter indicator light. 1.34 Cutterhead position control. 1.35 Cutterhead drive engagement. 1.35 Weight transfer/traction assistance. 1.36 Starting the engine. 1.36 - 1.37 Stopping the engine. 1.37 General operating hints. 1.38 Cu
Summary of the content on the page No. 6
1.6 SAFETY PRECAUTIONS 1.6 READ THIS MANUAL BEFORE USING THE LT324 MOWER, IT IS ESSENTIAL THAT OPERATORS STUDY IT FOR THEIR OWN SAFETY. THE FOLLOWING PRECAUTIONS MUST BE TAKEN TO HELP PREVENT ACCIDENTS. A CAREFUL OPERATOR WHO USES COMMON SENSE IS THE SAFEST OPERATOR. TRAINING Read the instructions carefully. Be familiar with the controls and the proper use of the equipment. Learn how to stop the mower quickly in an emergency. Never allow children or people unfamiliar wi
Summary of the content on the page No. 7
1.7 1.7 SAFETY PRECAUTIONS PREPARATION Continued. Ensure that the cutterheads are fully raised with the latches and safety locks engaged in position before transporting the mower. Replace faulty silencers. Check the condition of the tyres and ensure that they are inflated to the correct pressures, refer - SPECIFICATIONS. This is particularly important if the machine is to be taken on the public highway. Check that the mower is in good working order, paying particular attention to the brakes an
Summary of the content on the page No. 8
1.8 SAFETY PRECAUTIONS 1.8 OPERATION Continued. Do not use on a slope of more than 19 degrees. Where ground conditions are such that there may be a risk of the mower rolling over, the requirements of SI 1998 No 2306 "Provision and Use of Work Equipment Regulations" should be considered, refer - INTRODUCTION - Optional Extras. Ground conditions affect traction. Particular conditions may not permit safe operation on the slope lim- its stated. Remember there is no such thing as a "safe" slope. Trav
Summary of the content on the page No. 9
1.9 1.9 SAFETY PRECAUTIONS OPERATION Continued. Watch out for traffic when crossing or near roadways. Use extreme caution when reversing. Disengage the cutterhead drive system before crossing surfaces other than grass. When using the machine, never direct discharge of material towards bystanders or allow anyone near the machine while in operation. Never operate the mower with defective guards, shields or without safety protective devices in place and in good working order. Do not change the engi
Summary of the content on the page No. 10
1.10 SAFETY PRECAUTIONS 1.10 HANDLING AND STORAGE OF FLUIDS Hydraulic Oil - Avoid contact with eyes and prolonged contact with skin. - Protective goggles should be worn when pouring. - Use of gloves or barrier cream is recommended. - Wash hands thoroughly after contact. - Store under cover, away from heat and sources of ignition. Diesel Oil - Avoid skin and eye contact. - Wear impervious gloves when regular contact is likely and goggles when there is risk of splashing. - Wash hands thoroughly af
Summary of the content on the page No. 11
1.11 SAFETY PRECAUTIONS 1.11 MAINTENANCE AND STORAGE Take care when rotating a cutting cylinder as this can cause other cylinders to rotate. When the machine is to be parked, stored or left unattended, lift the cutterheads to the transport position and engage the safety locks or lower the cutterheads to the ground. Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition. Allow the engine to cool before storing in any enclosure. To reduce the risk of fire, ke
Summary of the content on the page No. 12
P kg P O I II III 924898(REV. 0 ) 1.12 SAFETY PRECAUTIONS 1.12 DECALS b d e c a Decal - Control Panel Part No: 924898 Location: Control Panel. a) Ignition Switch h) Cutters - Off f b) Engine Speed - Slow i) Cutters - Forward g c) Engine Speed - Fast j) Horn d) Parking Brake - Engage k) Cutters - Lift h e) Parking Brake - Disengage l) Cutters - Hold i f) Weight Transfer - Control m)Cutters - Drop/Float m g) Cutters - Reverse n) Hour Meter k n j l b a c Decal - Inclines Part No: 924857 (1) Loca
Summary of the content on the page No. 13
1.13 SAFETY PRECAUTIONS 1.13 DECALS Continued. Decal - Jacking / Support Point Part No: 70-13-072 Location: Front Axle - 2 Points Rear Towing Eye a a) Jacking and Support Point Y REMOVE ONL RADIA O R T CAP WHEN ENGINE IS COOL. Decal - Engine Fan / Radiator Part No: 70-13-073 TTENDRE IL AUT LE A OUJOURS F T REFROIDISSEMENT DU MOTEUR ANT DE V RETIRER A LE DU BOUCHON RADIA TEUR. Location: Engine Fan Cowl WIJDER VER DE RADIA AS ORDOP P T NADA T D E OR MOT IS AFGEKOELD. HEIZKORPERDECKEL ENTFE
Summary of the content on the page No. 14
105dB 1.14 1.14 SAFETY PRECAUTIONS DECALS Continued. SPELLBROOK, BISHOP’S STORTFORD, Decal - Serial Number HERTS. CM23 4BU. ENGLAND. CODE 924C Location: Rear Bulkhead LT324 - TRIPLE TURF MOWER Kg 1025 RPM 2800 2004 kW 26.1 Serial No: 924C001001 PREVENT PLATFORM DAMAGE ! ENGAGE PARKING BRAKE AND DROP CUTTERHEADS BEFORE Decal - Prevent Platform RAISING/LOWERING PLATFORM. Damage POUR EVITER DES DOMMAGES, METTRE LE FREIN DE PARKING ET POSER LES TETES DE COUPES AVANT DE Part No
Summary of the content on the page No. 15
105dB 1.15 EC CONFORMITY INFORMATION 1.15 NOISE LEVELS Operators Daily Personal Noise Exposure: HAYTER LIMITED have no control over site conditions, duration of use, state of maintenance or SPELLBROOK, BISHOP’S STORTFORD, HERTS. CM23 4BU. ENGLAND. adjustment of the mower. All of these factors will affect the operator's CODE 924C daily personal noise exposure level - L LT324 EP,d - TRIPLE TURF MOWER Kg 1025 2004 Under typical working conditions operators could be exposed to a daily RPM 280
Summary of the content on the page No. 16
1.16 1.16 EC CONFORMITY INFORMATION EC DECLARATION OF CONFORMITY EC DECLARATION OF CONFORMITY HAYTER LIMITED, Spellbrook, Bishop’s Stortford, Herts CM23 4BU ENGLAND declare that the lawnmower: Type: Ride-On Cylinder Lawnmower Model Name. LT324 Triple Turf Mower Model No.: CODE 924C Cutting Width: 2120 mm Speed of rotation of cutting device: 1050 rpm Engine Manufacturer: Kubota Speed of rotation of engine: 2850 rpm Complies with the provisions of Directive: 98/37/EC Essential Health & Safety
Summary of the content on the page No. 17
1.17 INTRODUCTION 1.17 INTRODUCTION The Hayter LT324 Triple Turf Mower is a diesel engine powered self propelled machine with hydraulic systems for ground drive, cutterhead drives and steering. The machine operates in two wheel drive with automatic four wheel drive on demand. A differential lock function may be selected. The transmission system is converted automatically to engage drive to all 4 wheels when the machine speed decreases as a result of front wheel traction slip. 2WD is automatical
Summary of the content on the page No. 18
1.18 1.18 SPECIFICATIONS SPECIFICATIONS ALL FIGURES ARE NOMINALLY QUOTED AT THE RATED ENGINE SPEED OF 2800 RPM UNLESS OTHERWISE STATED. ENGINE Kubota V1505 -BB. Type: 4 Cylinders in line. 35hp (26.1 kw) @ 2800 RPM. Power Rating: DIN 70020. 1498 cc. Capacity: Clean air drawn through screened air intake in-front of Air Cleaner: radiator via a cyclonic air cleaner with built in pre-cleaner. Water-Cooled. Cooling System: 12V. 480 Amps S.A.E. Battery: 40 Amps. Alternator: 1.2 KW Electric. Starter:
Summary of the content on the page No. 19
1.19 SPECIFICATIONS 1.19 TRANSMISSION SYSTEM Hydraulic. Drive Type: Variable displacement hydraulic piston pump with integral charge Pump: pump and pedal control. Front Axle - Radial piston, fixed displacement, with integral disc Wheel Motors: brake (pressure released). Rear Axle - Gear motor, fixed displacement. Electro - hydraulic control valve with pedal control. Differential Lock: 2WD (front axle) with differential lock (selectable) and automatic Drive: 4WD on demand (forward & reverse)
Summary of the content on the page No. 20
1.20 1.20 SPECIFICATIONS CUTTERHEAD LIFT SYSTEM AND STEERING Drive Type: Hydraulic. Pump: Hydraulic gear pump with integral relief valve. Delivery Rate: 11 Litres per minute. Steering: Power beyond hydrostatic steering valve with priority flow to steering and auxiliary flow to cutterhead lift system. Manual emergency steering. Cutterhead Lift Control: Mechanical-hydraulic. Relief Valve: 105 bar (1522 psi). Weight Transfer: Variable hydraulic applied weight transfer acting on all cutterheads.
