Summary of the content on the page No. 1
Harrier 56
CODES
340A 341A
(Auto Drive) Electric Start
(Variable Speed)
OWNER'S HANDBOOK
(English Version)
FROM SERIAL NO:
340A001001, 341A001001 HANDBOOK: 340228 (REV .1.)
ISSUE 09.9.03
Summary of the content on the page No. 2
MAIN FEATURES /SPECIFICATIONS Main Features 1. Spark Plug lead 2. Engine Cover 3. Air Cleaner 4. Fuel Cap 5. Oil Filler Cap & Dip Stick 6. Handle Securing Knob 7. Engine Start Grip 8. Engine Stop Lever 9. Handlebar 12 10. Ground Drive Clutch Lever 11. Key (341A Only) 5 12. Throttle Control 14 13. Grassbag Assembly 4 14. Rear Deflector 3 15. Serial No. Label 16. Height of Cut Lever 2 15 17. Battery (341A Only) 18. Muffler Guard 1 16 17 18 3D340A1 Specifications Code 340A 341A En
Summary of the content on the page No. 3
1ST Year (12 months) 1ST Year (12 months) Owner s Name: We certify that this service has been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Note for dealer: Please retain this voucher for your records. 2nd Year (24 months) 2nd Year (24 months) Owner s Name: We certify that this service has been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Note for dealer: Please retain this voucher for your records.
Summary of the content on the page No. 4
Summary of the content on the page No. 5
CONTENTS 1.2 Main Features/Specifications 1.21 - 1.28 Mower Maintenance 1.21 - Engine 1.5 Contents 1.21 - Throttle Cable Adjustment 1.21 - Carburettor Adjustments 1.6 Introduction 1.21 - Oil Service 1.22 - Air Cleaner Service 1.7 Warranty 1.22 - Spark Plug Service 1.23 - Keeping Engine Clean 1.8 - 1.11 Safety Precautions 1.23 - Grassbag 1.24 - Deck Housing 1.11 Safety Symbols 1.24 - Securing Nuts and Bolts 1.11 Decal Symbols 1.24 - Clutch Cable Adjustment 1.25 - Lubrication 1.12 Assembling th
Summary of the content on the page No. 6
INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you gain safe and efficient service from your mower. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety, operation, maintenance and specifications. Read and understand this handbook prior to operating your mower for the first time. Make sure you are familiar with all the controls and points of regular maintenance. If you
Summary of the content on the page No. 7
WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warranty and services are provided through their authorised network. To qualify for the full benefit of the warranty, the warranty registration c
Summary of the content on the page No. 8
SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following precautions may result in serious injury. Training Before using the mower read the owners handbook carefully. Pay par- ticular attention to the safety precautions. Ensure that you are familiar with the con
Summary of the content on the page No. 9
SAFETY PRECAUTIONS Preparation - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely. A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be replaced immedi- ately with a genuine Hayter replacement part Operation Do not operate the engine in a confined space where exhaust fumes (carbon mo
Summary of the content on the page No. 10
SAFETY PRECAUTIONS Operation Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnect the spark plug lead: - Before clearing blockages or unclogging the discharge chute. - Before cleaning/checking or working on the mower. -
Summary of the content on the page No. 11
SAFETY PRECAUTIONS Maintenance & Storage Allow the engine to cool before storing in any enclosure. To reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety. If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. Wear strong work gloves when removing and reassembling the cut- terblade
Summary of the content on the page No. 12
ASSEMBLING THE MOWER Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. 1. Engine Handbook. 2. Grassbag. 3. Charger (341A) 4. Ignition Key (341A) To prevent accidents cut off the long ribbon attached to the grass- bag and discard. (341A Only) Note: Prior to first use please fully charge the battery for 14 hours. (Refer to battery charging) Handlebar Unscrew the handle
Summary of the content on the page No. 13
BEFORE STARTING THE MOWER Prevent Engine Damage To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol before starting the engine. Oil Type Always use high quality detergent oil classified SAE 30 oil. Never use additives with recommended oil. To prolong the life of your engine it is important that the oil is changed after the first 5 hours of use - refer to ‘Maintenance Schedule’. Check Oil Level 0.15 Clean arou
Summary of the content on the page No. 14
OPERATING THE MOWER Controls Operate all control levers several times and ensure that the cables move freely. Check that the engine stop and ground drive clutch levers return freely to their rest position when released. Whilst operating the engine throttle mechanism slight resistance should be felt when moving the lever to the ‘choke’ position. Starting - Step 1 Move the throttle control lever to the ‘choke’ position before starting a cold engine. Move the throttle control lever to the ‘fast’ po
Summary of the content on the page No. 15
OPERATING THE MOWER Electric Start (Electric start Only) Stand behind the mower and hold the handlebar together with the engine stop lever. Turn the ignition key in a clockwise direction and hold in position to crank the engine. When the engine starts release the key and move the throttle to the fast position after starting a cold engine. Note: Cranking the engine for more than 15 seconds in any one minute can damage the starter motor. If necessary the engine can be started manually without us
Summary of the content on the page No. 16
OPERATING THE MOWER Slopes To prevent engine damage do not use the mower on slopes greater than 20 degrees. Height of Cut To adjust the height of cut: Grip the lever and pull sideways to dis- engage it from the locking notch, then push forwards to lower or pull backwards to raise the height of cut. Finally release the lever at the required position and ensure it locks firmly into one of the nine setting notches. Always select a height of cut to suit operating conditions. Aim to pre- vent engin
Summary of the content on the page No. 17
OPERATING THE MOWER Without Grass Collection Remove the grassbag and operate the mower with the rear deflector in the closed position. Heavy Growth Areas of heavy growth should be mown without collecting the clip- pings. If collection is required, first mow the area without the grass- bag at the maximum height of cut setting. Allow the grass clippings to dry out and then mow the area at the maximum height of cut setting with the grassbag fitted. Reduce the height of cut and mow the area again
Summary of the content on the page No. 18
LAWN CARE CALENDAR To be used as a guide only. January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. March The yearly lawn work programme really starts this month. As soon as the ground conditions are suitable, the first cut can be made. The first cut should merely “top” the grass as
Summary of the content on the page No. 19
LAWN CARE CALENDAR August Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. September Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow. October Rake out the thatch from the turf and spike the lawn to assist in drainage. Brush in peat and sharp sand. November Use a stiff broom to dispers
Summary of the content on the page No. 20
MAINTENANCE SCHEDULE Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass. First 5Hrs After the very first five hours change the engine oil Daily Check the oil level Remove grass debris from around the engine, exhaust/exhaust guard and air ways in the top cowl and underside of the deck housing.
