Husqvarna 325RX user manual

User manual for the device Husqvarna 325RX

Device: Husqvarna 325RX
Category: Lawn Mower
Manufacturer: Husqvarna
Size: 2.11 MB
Added : 9/21/2013
Number of pages: 40
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Husqvarna 325RX. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Husqvarna 325RX.

For your convenience

If looking through the Husqvarna 325RX user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Husqvarna 325RX on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Husqvarna 325RX to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Husqvarna 325RX User manual - Online PDF
Advertisement
« Page 1 of 40 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Husqvarna 325RX but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Husqvarna 325RX. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1


Operator’s manual (EPA)
323R 325R
X-series
325RD
X-series
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
E E E En n n ng g g glllliiiis s s sh h h h

Summary of the content on the page No. 2

15 m 50FT KEY TO SYMBOLS Symbols Only use non-metallic, flexible cutting WARNING! Clearing saws, brushcutters attachments, i.e. trimmer heads with and trimmers can be dangerous! Careless trimmer cord. or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of the operator’s manual. Other symbols/decals on the machine refer to special certific

Summary of the content on the page No. 3

CONTENTS Contents Note the following before starting: KEY TO SYMBOLS Please read the operator’s manual carefully. Symbols ....................................................................... 2 Maintenance, replacement, or repair of the emission control CONTENTS devices and system may be performed by any nonroad Contents ...................................................................... 3 engine repair establishment

Summary of the content on the page No. 4

INTRODUCTION Dear customer! Congratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Huskvarna River, for production of muskets. The location was logical, since water power was harnessed from the Huskvarna River to create the water-powered plant. During over 300 years of continuous operation, the Husqvarna factory has produ

Summary of the content on the page No. 5

WHAT IS WHAT? What is what on the clearing saw? 1 Blade 18 Locking nut 2 Grease filler cap, bevel gear 19 Support flange 3 Bevel gear 20 Support cup 4 Cutting attachment guard 21 Drive disc 5 Shaft 22 Trimmer head 6 Handlebar 23 Socket spanner 7 Throttle control 24 Operator’s manual 8 Stop switch 25 Transport guard 9 Throttle lockout 26 Allen key 10 Suspension 27 Locking pin 11 Cylinder cover 28 Harness 12 Starter handle 29 Shaft coupling 13 Fuel tank 30 Start throttle button

Summary of the content on the page No. 6

GENERAL SAFETY PRECAUTIONS Important Personal protective equipment IMPORTANT! IMPORTANT! The machine is only designed for trimming grass, grass A clearing saw, brushcutter or trimmer can be dangerous if clearing and/or forestry clearing. used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely The only accessories you can operate with this engine unit important that you read and understand the contents of this

Summary of the content on the page No. 7

GENERAL SAFETY PRECAUTIONS CLOTHING Make sure the throttle control is locked at the idle setting when the throttle lockout is released. Wear clothes made of a strong fabric and avoid loose clothing that can catch on twigs and branches. Always wear heavy, long pants. Do not wear jewellery, shorts sandals or go barefoot. Secure hair so it is above shoulder level. FIRST AID KIT Always have a first aid kit nearby. Press the throttle lockout and make sure it returns to its original position when

Summary of the content on the page No. 8

GENERAL SAFETY PRECAUTIONS Regularly check the vibration damping units for cracks or Cutting attachment guard deformation. Check that the vibration damping element is undamaged and securely attached. WARNING! Overexposure to vibration can This guard is intended to prevent loose objects from being lead to circulatory damage or nerve damage thrown towards the operator. The guard also protects the ! in people who have impaired circulation. operator from accidental contact with the cutting at

Summary of the content on the page No. 9

GENERAL SAFETY PRECAUTIONS Never use a machine that has a faulty muffler. Locking nut A locking nut is used to secure some types of cutting attachment. Regularly check that the muffler is securely attached to the machine. When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. To remove it, If the muffler on your machine is fitted with a spark arrestor undo the nut in the same direction as the cutting attachment screen this must be cleaned

Summary of the content on the page No. 10

GENERAL SAFETY PRECAUTIONS General rules Cutting equipment This section describes how to choose and maintain your cutting equipment in order to: • Reduce the risk of blade thrust. Only use cutting attachments with the guards we recommend! See the chapter on Technical data. • Obtain maximum cutting performance. • Extend the life of cutting equipment. IMPORTANT! Only use cutting attachments with the guards we Keep the teeth of the blade correctly sharpened! Follow our recommend! See the chapte

Summary of the content on the page No. 11

GENERAL SAFETY PRECAUTIONS • Sharpen all edges equally to maintain the balance of the Adjust the blade setting. This should be 1 mm. blade. WARNING! Always discard a blade that is bent, twisted, cracked, broken or damaged ! in any other way. Never attempt to straighten Trimmer head a twisted blade so that it can be reused. Only use original blades of the specified type. IMPORTANT! Always ensure the trimmer cord is wound tightly and evenly Sharpening the saw blade around the drum, otherwise t

Summary of the content on the page No. 12

ASSEMBLY Fitting the handlebar (323R) Fitting the handlebar (325Rx, 325RDx) • Remove the screw at the rear of the throttle handle. • Slide the throttle handle onto the right side of the • Remove the screw at the rear of the throttle handle. handlebar, (see diagram). • Slide the throttle handle onto the right side of the handlebar, (see diagram). • Align the screw hole in the throttle handle with the hole in the handlebar. • Align the screw hole in the throttle handle with the hole in • Refit

Summary of the content on the page No. 13

ASSEMBLY Assembling and dismantling the Assembling the cutting equipment two-piece shaft (325RDx) WARNING! When fitting the cutting attachment it is ! extremely important that the raised section on the drive disc/support flange engages Assembly correctly in the centre hole of the cutting ! attachment. If the cutting attachment is fitted • Loosen the coupling by turning the knob. incorrectly it can result in serious and/or • Align the tab of the attachment (A) with the arrow on the fatal perso

Summary of the content on the page No. 14

ASSEMBLY • Place the blade (D), support cup (E) and support flange guard as possible. To tighten the nut, turn the spanner in (F) on the output shaft. the opposite direction to the direction of rotation (Caution! left-hand thread). • Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the

Summary of the content on the page No. 15

ASSEMBLY • Fit the nut (G). Tighten the nut to a torque of 35-50 Nm Adjusting the harness and clearing (3.5-5 kpm). Use the socket spanner in the tool kit. Grasp saw the handle of the spanner as close to the trimmer guard as possible. WARNING! When using a clearing saw it • To tighten the nut, turn the spanner in the opposite must always be hooked securely to the direction to the direction of rotation (Caution! left-hand ! harness. Otherwise you will be unable to thread). control the cl

Summary of the content on the page No. 16

FUEL HANDLING Gasoline Fuel safety Never start the machine: 1 If you have spilled fuel on it. Wipe off the spillage and allow remaining fuel to evaporate. CAUTION! Always use a quality gasoline/oil mixture with an octane rating of at least 87 octane ((RON+MON)/2). If your 2 If you have spilled fuel on yourself or your clothes, change machine is equipped with a catalytic converter (see chapter your clothes. Wash any part of your body that has come in on Technical data) always use a good qu

Summary of the content on the page No. 17

FUEL HANDLING Mixing Fueling • Always mix the gasoline and oil in a clean container intended for fuel. • Always start by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline. WARNING! Taking the following precautions, will lessen the risk of fire: • Mix (shake) the fuel mixture thoroughly before filling the ! machine’s fuel tank. Do not smoke or place hot objects near fuel. Always shut off the

Summary of the content on the page No. 18

STARTING AND STOPPING Check before starting Starting and stopping • Check the blade to ensure that no cracks have formed at the bottom of the teeth or by the centre hole. The most WARNING! The complete clutch cover and common reason why cracks are formed is that sharp shaft must be fitted before the machine is ! corners have been formed at the bottom of the teeth while started, otherwise the clutch can come loose sharpening or that the blade has been used with dull and cause personal inju

Summary of the content on the page No. 19

STARTING AND STOPPING CAUTION! Do not pull the starter cord all the way out and do Stopping not let go of the starter handle when the cord is fully extended. This can damage the machine. Stop the engine by switching off the ignition. CAUTION! Do not put any part of your body in marked area. Contact can result in burns to the skin, or electrical shock if CAUTION! The stop switch automatically returns to the start the spark plug cap has been damaged. Always use gloves. position. In order

Summary of the content on the page No. 20

WORKING TECHNIQUES 6 Keep a good balance and a firm foothold. General working instructions 7 Always hold the machine with both hands. Hold the machine on the right side of your body. IMPORTANT! This section describes the basic safety precautions for working with clearing saws and trimmers. If you encounter a situation where you are uncertain how to proceed you should ask an expert. Contact your dealer or your service workshop. Avoid all usage which you consider to be beyond your capability.


Alternative user manuals
# User manual Category Download
1 Husqvarna 07002 User manual Lawn Mower 33
2 Husqvarna 11 User manual Lawn Mower 16
3 Husqvarna 11 Bio User manual Lawn Mower 12
4 Husqvarna 1030 BioClip User manual Lawn Mower 23
5 Husqvarna 1000-14 User manual Lawn Mower 45
6 Husqvarna 11 Bio/13 H Bio User manual Lawn Mower 6
7 Husqvarna 11, 13, 11 Bio, 13 Bio User manual Lawn Mower 7
8 Husqvarna 11/13 H User manual Lawn Mower 1
9 Husqvarna 11 C User manual Lawn Mower 5
10 Husqvarna 115 312526R1 User manual Lawn Mower 11
11 Husqvarna 115 127127 IR User manual Lawn Mower 2
12 Husqvarna 11R User manual Lawn Mower 5
13 Husqvarna 11C User manual Lawn Mower 6
14 Husqvarna 1200 User manual Lawn Mower 101
15 Husqvarna 1200-18 User manual Lawn Mower 13
16 2Wire 7-1/4 Inch Circular Saw 94245 User manual Lawn Mower 3
17 Agilent Technologies E4371A User manual Lawn Mower 0
18 Agilent Technologies E4370A User manual Lawn Mower 3
19 Agilent Technologies E4374A User manual Lawn Mower 1
20 Adams 22 User manual Lawn Mower 1