Summary of the content on the page No. 1
Operator´s manual
BZ 27
BZ 34
Please read these instructions carefully and make sure
you understand them before using the machine. English
Summary of the content on the page No. 2
Summary of the content on the page No. 3
OPERATOR’S MANUAL RIDER BZ SERIES Contents Contents...................................................................1 Maintenance ......................................................... 36 Introduction .............................................................3 Maintenance Schedule...................................... 36 Congratulations....................................................3 Battery............................................................... 38
Summary of the content on the page No. 4
WARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the influence of any mind altering substance. English-2
Summary of the content on the page No. 5
INTRODUCTION Introduction Congratulations Thank you for purchasing a Husqvarna ride-on mower. This machine is built for the greatest efficiency and rapid mowing primarily of large areas. Controls in one place and a hydrostatic transmission regulated by steering controls also contribute to the machine’s performance. This manual is a valuable document. Following the instructions (use, service, maintenance, etc.) by all who operate this machine can considerably increase the lifespa
Summary of the content on the page No. 6
INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer, see the certificate in the Service Journal in this operator’s manual. When you need spare parts or support in service questions, warranty issues, etc., please consult
Summary of the content on the page No. 7
SYMBOLS AND DECALS Symbols and Decals These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. WARNING! Xxxxxxx xxxx xxxxxxxx xxx x Xxxxx xxxxxx xx. xx xxxxxxxx xxxxx xxx xx. Used in this publication to notify the reader of a risk of personal injury or death, particularly if the reader should neglect to follow instructions given in the manual. IMPORTANT INFORMATION Xxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx xx. Used in
Summary of the content on the page No. 8
SYMBOLS AND DECALS Read Shut off engine Keep a safe Use on No Operator´s and remove key distance from slopes no passengers. Manual. before the machine. greater performing any than 10˚. maintenance or repair work. Whole body Severing of Do not open Careful Careful going exposure to fingers and or remove backing up, forward, watch thrown toes. safety shields watch for other for other people. objects. while engine people. is running. English-6
Summary of the content on the page No. 9
SAFETY INSTRUCTIONS Safety Instructions These instructions are for your safety. Read them carefully. WARNING! This symbol means that important safety instructions need to be emphasized. It concerns your safety. IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. General Operation • Read, understand, and follow all instructions on the machine and in
Summary of the content on the page No. 10
SAFETY INSTRUCTIONS • Disengage blades when not mowing. Shut off engine, wait for all parts to come WARNING! to a complete stop, and remove ignition Engine exhaust and certain key before cleaning the machine, vehicle components contain removing the grass catcher, or or emit chemicals considered unclogging the discharge guard. to cause cancer, birth defects, • Operate machine only in daylight or good or other reproductive system artificial light. damage. The engine exhaust contains
Summary of the content on the page No. 11
SAFETY INSTRUCTIONS • All drivers should seek and obtain professional and practical instruction. Such instructions should emphasize: 1. the need for care and concentration when working with ride-on machine; 2. control of a ride-on machine sliding on a slope will not be regained by the aplication of the brake. The main reasons for loss of control are: a. insufficient wheel grip; b. being driven too fast; c. inadequate braking; d. the type of machine is unsuitable for its task; e. l
Summary of the content on the page No. 12
SAFETY INSTRUCTIONS Slope Operation Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it. • Mow up and down slopes (10 degrees maxium), not across. • Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles. 8011-51
Summary of the content on the page No. 13
SAFETY INSTRUCTIONS Children Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them. • Keep children out of the mowing area and in the watchful care of a responsible adult other than the operator. • Be alert and turn machine off if a child enters the area. • Before and while backing, look behind and down for small childr
Summary of the content on the page No. 14
SAFETY INSTRUCTIONS Maintenance WARNING! The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed. Safe Handling of Gasoline To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. • Extinguish all cigarettes, cigars, pipes, and other sources of ignition. • Use only approved gasoline container. • Never remove gas cap or add fue
Summary of the content on the page No. 15
SAFETY INSTRUCTIONS • Check the fuel level before each use and leave space for the fuel to expand, because the heat from the engine and the sun may otherwise cause the fuel to expand and overflow. General Maintenance • Never operate machine in a closed area. • Keep all nuts and bolts tight to be sure the equipment is in safe working condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris build-up.
Summary of the content on the page No. 16
SAFETY INSTRUCTIONS • Acid in the eyes can cause blindness, contact a doctor immediately. • Be careful when servicing the battery. Explosive gases form in the battery. Never perform maintenance on the battery when smoking or near open flames or sparks. The battery can explode and cause serious injury/damage. • Ensure that nuts and bolts, especially the fastening bolts for the blade attachments, are properly tightened, torqued and that the equipment is in good condition. 6003-009 • D
Summary of the content on the page No. 17
SAFETY INSTRUCTIONS • Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting. • Never make adjustments with the engine running. • The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer. Only use approved repair parts for the machine. • The blades are sharp and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them. • Check the parking bra
Summary of the content on the page No. 18
SAFETY INSTRUCTIONS • Do not tow any trailers, etc. with this mower. They may jackknife or overturn causing damage to the mower and possibly serious injury to the operator. • When machine is to be parked, stored or left unattended, lower the cutting means unless a positive mechanical lock is used. Customer responsibilities • Read and observe the safety rules. • Follow a regular schedule in maintaining, caring for and using your mower. • Follow the instructions under "Maintenance”
Summary of the content on the page No. 19
CONTROLS Controls This operator’s manual describes the Husqvarna Zero Turn Rider. The mower is fitted with a liquid cooled, 3 cylinder Daihatsu diesel engine (27 HP) or Daihatsu Turbo diesel engine (34 HP) Transmission from the engine is made via two belt-driven hydrostat transaxles, which in turn drive a hydraulic motor for each drive wheel. Using the left and right steering controls, the flow is regulated and thereby the direction and speed. BAM-1 Zero Turn Rider 4 14 1516 17 9
Summary of the content on the page No. 20
CONTROLS Gauges 1 2 3 Water temperature gauge- indicates coolant temperature and warns of overheat situation. Ammeter - indicates amount of electrical flow at the battery. Under normal operating conditions the needle will be slightly on the plus (+) side of the gauge, showing that current is being supplied to the battery. At idle speed, the indicator may be at zero or on the negative (-) side. A continuous negative reading at normal operating speed indicates a malfunction
