Summary of the content on the page No. 1
®
m
Owner's Manual
532 43 62-86 Rev. 1
Summary of the content on the page No. 2
SAFETY RULES Safe Operation Practices for Ride=On Mowers DANGER: THiS CUTTING MACHINE iS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULTIN SERIOUS iNJURY OR DEATH. • Do not operate machine without the entire grass catcher, discharge chute, or other safety devices in place and WARNING: in order to prevent acci= working. dental starting when setting up, trans- • Slow down before turning. porting, adjusting or making repai
Summary of the content on the page No. 3
SAFETY RULES & Safe Operation Practices for Ride=On Mowers GENERAL ill. CHILDREN • Never operate machine in a closed area. Tragic accidents can occur if the operator is not alert to Keep all nuts and bolts tight to be sure the equipment the presence of children. Children are often attracted to is in safe working condition. the machine and the mowing activity. Never assume that Never tamper with safety devices. Check their proper children will remain where you last saw them. operation regularly.
Summary of the content on the page No. 4
PRODUCT SPECiFiCATiONS CUSTOMER RESPONSIBILITIES • Read and observe the safety rules. Gasoline Capacity 1.5 Gallons • Follow a regular schedule in maintaining, caring for and Type: Unleaded Regular and using your tractor. Oil Type (API-SG-SL): SAE 30 (above 32°F) • Follow the instructions under "Maintenace" and "Stor- SAE 5W-30 (below 32°F) age" sections of this owner's manual. Oil Capacity: 48 oz. WARNING: This tractor is equipped with an internal com- Spark Plug: Champion RC12YC bustion engine
Summary of the content on the page No. 5
UNASSEMBLED PARTS Steering Wheel 1 / *_ I (1) Lock Washer Steering (1) Large Wheel Insert Flat Washer Steering Wheel tt _ x (1) Hex Bolt | i / i i t Steering Steering Wheel ""J--" Extension Shaft Adapter Steering Boot Seat (1) Washer (1) Seat (1) Bolt Slope Sheet (1) Oil Drain Tube For Future Use Key(s) 5
Summary of the content on the page No. 6
ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness. TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier. Standard wrench sizes are listed. / "'- 7° .;f:--2-_ (1) 5/16" wrench Utility knife / \ ?J - BOLT ! ,', (2) 7/16" wr
Summary of the content on the page No. 7
ASSEMBLY iNSTALL SEAT (See Figs. 3 and 4) TO INSTALL HOOD SCOOP (See Fig. 5) * Remove bolt and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor. Remove the cardboard packing and discard. * Connect switch to seat. Place seat on seat pan so all three (3) bottom pads are positioned over large slotted holes in pan. / / SEAT / SWITCH PAD _ SLOT / 7_ t I TAPE WIRING HARNESS Fig. 3 Push down on seat to engage pads in slots and pull seat towards rear of tracto
Summary of the content on the page No. 8
ASSEMBLY NOTE: You may now roll your tractor off the skid. Follow the J'CHECKLIST instructions below to remove the tractor from the skid. BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST _iL.WARNING: Before starting, read, understand and follow PERFORMANCE AND SATISFACTION FROM THIS all instructions in the Operation section of this manual. Be QUALITY PRODUCT. sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people a
Summary of the content on the page No. 9
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. L I",1 'e -Ib REVERSE NEUTRAL HiGH LOW CHOKE FAST SLOW IGNiTiON SWITCH MOWER LiFT ENGINE OFF REVERSE ENGINE ON ENGINE START PARKING BRAKE MOWER HEIGHT OPERATION SYSTEM (ROS) CLUTCH/BRAKE LIGHTS ON FUEL BATTERY REVERSE FORWARD CRUISE CONTROL PEDAL ATTACHMENT ATTACHMENT DANGER, KEEP HANDS CLUTCH ENGAGED KEEP AREA CLEAR SLOPE HAZARDS CLUTCH DISENGAGED AND FEET AWAY (SEE
Summary of the content on the page No. 10
OPERATION KNOW YOUR TRACTOR READ THiS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrationswith your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. 03133 Fig. 6 Our tractors conform to the applicable safety standards of the American National Standards Institute. (A) ATTACHMENT LIFT LEVER - Used to raise, lower, (F) IGNITION SWITCH - Used for starting and stopping and adjust the mower
Summary of the content on the page No. 11
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses. • Turn ignition key (F) to "STOP" position and remove HOW TO USE YOUR TRACTOR key. Always remove key when leaving tractor to prevent unauthorized use. TO SET PARKING BRAKE (S
Summary of the content on the page No. 12
OPERATION TO ADJUST MOWER CUTTING HEIGHT TO OPERATE MOWER (See Fig. 11) Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with The position of the attachment lift lever (A) determines the the engine running and the attachment clutch engaged will cutting height. shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitat- ing or cutting off when operating your equipment on rough,
Summary of the content on the page No. 13
OPERATION TOWING CARTS & OTHER ATTACHMENTS BEFORE STARTING THE ENGINE Tow only the attachments that are recommended by and CHECK ENGINE OIL LEVEL comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, The engine in your tractor has been shipped, from the while on a slope, is dangerous. Tires can lose traction with factory, already filled with summer weight oil. the ground and cause you to lose control of your tractor. • Check engine o
Summary of the content on the page No. 14
OPERATION Insert key into ignitionandturn key clockwise to "START" position and release key as soon as engine starts. may be movement of the drive wheels. Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after 4. Move motion control lever to full forward position and several attempts, move throttle control to fast position, hold for five (5) seconds. Move lever to full reverse wait a few minutes and try again. If engine still does position an
Summary of the content on the page No. 15
MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE EACH 8 25 50 100 SEASON STORAGE SCHEDULE USE HOURS HOURS HOURS HOURS v" Check Brake Operation Check Tire Pressure v' T Check Operator Presence & ROS Systems v" v' v" A Check for Loose Fasteners C Check/Replace Mower Blades T Lubrication Chart v" v' 0 Check Battery Level R Clean Battery and Terminals Clean Debris Off Steering Plate Check Transaxle Cooling Check Mower Levelness v' Check V-Belts v" v" Check Engine Oil Level V' _1,2
Summary of the content on the page No. 16
MAINTENANCE TRACTOR Always observe safety rules when performing any proved by the manufacturer of your tractor. maintenance. _ Using CAUTION: a blade Use onlya not approved replacement by the blade manu= ap= facturer of your tractor is hazardous, could BRAKE OPERATION damage your tractor and void your warranty. If tractor requires more than five (5) feet to stop at highest BLADE REMOVAL (See Fig. 18) speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and
Summary of the content on the page No. 17
MAINTENANCE TRANSAXLE MAINTENANCE The transmission fan and cooling fins should be kept clean © to assure proper cooling. OiL Do not attempt to clean fan or transmission while engine DRAIN is running or while the transmission is hot. To prevent pos- PLUG sible damage to seals, do not use high pressure water or steam to clean transmission. • Inspect cooling fan to be sure fan blades are intact and clean. • Inspect cooling fins for dirt, grass clippings and other materials. To prevent damage to sea
Summary of the content on the page No. 18
MAINTENANCE ENGINE COOLING SYSTEM (See Fig. 20) CLEANING Debris may clog the engine's air cooling system. Remove • Clean engine, battery, seat, finish, etc. of all foreign matter. blower housing and clean the area shown to prevent over- heating and engine damage. • Clean debris from steering plate. Debris can restrict clutch/brake pedal shaft movement, causing belt slip CLEAN OUT CHAFF AND DEBRIS and loss of drive. AIR iAO O 'OO: vo'Oa" 'nc o'n'°onO i movable parts (See Fig. 22) ...............
Summary of the content on the page No. 19
SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: Depress brake pedal fully and set parking brake. Place motion control lever in neutral position. * Place attachment clutch in "DISENGAGED" position. * Turn ignition key to "STOP" and remove key. * Make sure the blades and all moving parts have completely stopped. * Disconnectsparkp_ugwirefromsparkp_ugandp_acewirewhereitcannotcomeincontactwithp_ug_ IMPORTANT: IF AN ATTACHMENT OTHER THAN THE TO
Summary of the content on the page No. 20
SERVICE AND ADJUSTMENTS • ATTACH MOWER SIDE SUSPENSION ARMS (A) TO • Insert end of link (E) into hole in front mower bracket CHASSIS - Position hole in arm over pin (B) on outside and secure with washer and retainer spring (J). of tractor chassis and secure with retainer spring. • Repeat on opposite side of tractor. Fig. 26 • Hook end of clutch cable spring (Q) into hole in idler arm (R). Fig. 24 • Push clutch cable housing guide (P) into bracket, slide ATTACH REAR LIFT LINKS (C) - Lift rear cor
