Multiquip BS46H11 user manual

User manual for the device Multiquip BS46H11

Device: Multiquip BS46H11
Category: Lawn Mower
Manufacturer: Multiquip
Size: 5.88 MB
Added : 6/22/2013
Number of pages: 68
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Multiquip BS46H11. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Multiquip BS46H11.

For your convenience

If looking through the Multiquip BS46H11 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Multiquip BS46H11 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Multiquip BS46H11 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Multiquip BS46H11 User manual - Online PDF
Advertisement
« Page 1 of 68 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Multiquip BS46H11 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Multiquip BS46H11. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

OperatiOn and p ts Manual ar
MOdel Bs46h90
MO Bs46h11 del
MO B del 46 s hle
alk-w Behind trOwel
(O h GX270 nda ut2Qa2/GX340ut2Qap2
GasOline enGines)
Revision #2 (10/15/13)
Original Version
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
: 22903 pn

Summary of the content on the page No. 2

fuel and chemical exposure Warnings Gasoline engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber. Your risk from these exposure

Summary of the content on the page No. 3

silicosis/respiratory Warnings WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drillingofmasonry,concrete,metaland Grinding/cutting/drillingofmasonry,concrete,metaland othermaterialswithsilicaintheircompositionmaygive other materials can generate dust, mists and fumes off dust or mists containing crystalline silica. Silica is a containing chemicals known to cause serious or fatal basiccomponentofsand,quartz,brickclay,graniteand injury or illness, such as respiratory diseas

Summary of the content on the page No. 4

t able of contents omponent c rawings d bs4690/ h bs4611/ h bs46hle Nameplate And Decals ..................................... 46-47 WalK-behind troWel Standard Handle Assy. ..................................... 48-49 Fuel And Chemical Exposure Warnings .................. 2 Quick-Pitch Handle Assy. (Option) .................... 50-51 Silicosis/Respiratory Warnings ................................ 3 Guard Assy. ...................................................... 52-53 Table Of Contents ......

Summary of the content on the page No. 5

training checKlist Training checklist No. description OK? date Read operation manual 1 completely. Machine layout, location of 2 components, checking of engine oil level. 3 Fuel system, refueling procedure. Operation of controls (machine 4 not running). Safety controls, safety stop switch 5 operation. 6 Emergency stop procedures. 7 Startup of machine, engine choke. 8 Maintaining a hover. 9 Maneuvering. 10 Pitching. 11 Concrete fi nishing techniques. 12 Shutdown of machine. 13 Lifting of mac

Summary of the content on the page No. 6

daily pre-operation checKlist daily pre-Operation checklist       1 Engine oil level 2 Gearbox oil level 3 Condition of blades 4 Blade pitch operation 5 Safety stop switch operation page 6 — BS46H SeRIeS W aLK-BeHIND TROWeL • OpeRa TION aND paRTS maNU aL — Rev. #2 (10/15/13)

Summary of the content on the page No. 7

safety information Do not operate or service the equipment before reading Potential hazard associated with the operation of this the entire manual. Safety precautions should be followed equipment will be referenced with hazard symbols which at all times when operating this equipment. may appear throughout this manual in conjunction with Failure to read and understand the safety safety messages. messages and operating instructions could result in injury to yourself and others. SAFETY HAZARD S

Summary of the content on the page No. 8

safety information gENEraL SafETy NOTICE CaUTION „ This equipment should only be operated by trained and qualifi ed personnel 18 years of age and older. „ NeveR operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, „ Whenever necessary, replace nameplate, operation and hearing protection, steel-toed boots and other protective safety decals when they become diffi cult read. devices required by the job or city and state regulations. „ Manu

Summary of the content on the page No. 9

safety information TrOwEL SafETy NOTICE daNgEr „ aLwayS keep the machine in proper running condition. „ Fix damage to machine and replace any broken parts „ Engine fuel exhaust gases contain poisonous carbon immediately. monoxide. This gas is colorless and odorless, and can cause death if inhaled. „ aLwayS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location „ The engine of this equipment requires an adequate free fl ow of cooling air.

Summary of the content on the page No. 10

safety information FUeL SaFeTy TraNSpOrTiNg SafETy daNgEr CaUTION „ DO NOT add fuel to equipment if it is placed inside „ NeveR allow any person or animal to truck bed with plastic liner. Possibility exists of explosion stand underneath the equipment while or fi re due to static electricity. lifting. FUEL NOTICE „ Some walk-behind trowels can be lifted or moved by two people utilizing lifting tubes or other special attachments. Generally, however, they must be lifted using lifting bale

Summary of the content on the page No. 11

safety information eNvIRONmeNTaL SaFeTy/DeCOmmISSIONINg emISSIONS INFORmaTION NOTICE NOTICE Decommissioning is a controlled process used to safely The gasoline engine used in this equipment has been retire a piece of equipment that is no longer serviceable. designed to reduce harmful levels of carbon monoxide If the equipment poses an unacceptable and unrepairable (CO), hydrocarbons (HC) and nitrogen oxides (NOx) safety risk due to wear or damage or is no longer cost contained in gasoline

Summary of the content on the page No. 12

troWel specifications/dimensions TOPVIEW C D B A A A SIDE VIEW Figure 1. Dimensions Table 1. Trowel Specifications A–Height (Lifting Bale) –mm (in.) 800 (31.5) Path Width – mm (in.) 1,168 (46.0) Rotor – RPM (Dry Concrete) BS46H90 60-130 B–Height (Handle) – mm (in.) Standard 1,016 (40) Rotor – RPM (Dry Concrete) BS46H11 90-155 C–Width (Ring Diameter) – mm (in.) 1,181 (46.5) Gear Box Oil Capacity – ml (oz.) 769 (26) Shipping Weight – kg (lbs.) BS46H90 D–Length – mm (in.) 1,880 (74) Standard 129.

Summary of the content on the page No. 13

engine specifications Table 2. BS46H90 Noise and vibration emissions model BS46H90 Guaranteed ISO 11201:2010 Based 94.25 Sound Pressure Level at Operator Station in dB(A) Guaranteed ISO 3744:2010 Based 111.02 Sound Power Level in dB(A) Standard Handle 1.05 Whole Body Vibration Per ISO 2631- 2 TM 1:1997+A1:2010 in m/s SA(8) Quick Pitch Handle 0.67 NOTES: 1. Sound Pressure and Power Levels are “A” weighted Measures per ISO 226:2003 (ANSI S1.4-1981). They are measured with the operating conditio

Summary of the content on the page No. 14

general information gEarbO x INTeNDeD USe The gearbox is located beneath the engine and transfers Operate this trowel, tools and components in accordance power to the spider assembly. The gearbox controls the with the manufacturer's instructions. Use of any other tools rotational speed of the trowel and is equipped with two for stated operation is considered contrary to designated shafts (input and output). use. The risk of such use lies entirely with the user. The manufacturer cannot be

Summary of the content on the page No. 15

troWel components 4 5 6 7 8 3 2 16 9 10 QUICK PITCH ™ 1 HANDLE (OPTION) 9. handlebar adjuster — Change the angle/height of the 15 14 13 12 11 handle bars by loosening star wheel, adjust handlebars to desired location, tighten starwheel firmly to hold handlebars in that position. Figure 2. Trowel Control and Components 10. centrifugal "Kill" Switch — In the event the operator Figure 2 shows the location of the basic controls or loses control of the trowel, this switch will shut down compone

Summary of the content on the page No. 16

engine components Figure 3. Engine Controls and Components INITIaL SeR vICINg The engine (Figure 3) must be checked for proper 6. air cleaner – Prevents dirt and other debris from lubrication and filled with fuel prior to operation. Refer to the entering the fuel system. Remove wing-nut on top of manufacturer's engine manual for instructions and details air filter canister to gain access to filter element. of operation and servicing. NOTICE 1. fuel filler cap – Remove this cap to add unlead

Summary of the content on the page No. 17

assembly and installation aSSemBLy aND INST aLLa TION NOTICE Before the trowel can be put into operation there are some If additional handle height adjustment is desired, a components that must be installed before the trowel can handle wedge kit can be purchased for your trowel by be used. This section provides general instructions on how ordering P/N 2576 from your Multiquip dealer. to install those components. Instruction sheet P/N 20485 These wedges are placed between the handle and th

Summary of the content on the page No. 18

OFF ON assembly and installation 7. Adjustment of the throttle cable tension may be pitch cable installation required. If so, loosen the adjusting nut (top nut) on 1. For Standard Handle models expose the pitch cable the throttle cable receiver (Figure 7) and loosen or to maximum by turning the blade pitch star wheel tighten the locking nut (bottom nut). Retighten (Figure 10) fully counterclockwise for no pitch (blades adjusting nut. flat). DECREASE INCREASE ADJUSTING BLADE PITCH BLADE PIT

Summary of the content on the page No. 19

COMBO FINISH COMBO FINISH J J inspection 5. Insert the cable end through the yoke eyelet 3. A decal has been placed on the side of the handle (Figure 13). Tighten brass set nut #1 by hand to remove tube to assist the user in the adjustment of the spring. all the slack from the cable. 4. Align the groove on the slider with the text 48" COMBO/ "B" COMBO on the decal. CaUTION BLADE PITCH CABLE aLwayS wear approved eye and hearing protection before operating the trowel. YOKE YOKE EYELET NeveR pl

Summary of the content on the page No. 20

inspection 3. Insert and remove the dipstick without screwing it into gearbox Oil the filler neck. Check the oil level shown on the dipstick. 1. Determine if the gearbox oil is low by removing the oil 4. If the oil level is low (Figure 16), fill to the edge of the plug located on the side of the gearbox. (Figure 17) oil filler hole with the recommended oil type as listed This plug will be marked by the "check" decal. The in Table 4. Reference Table 3 for maximum engine oil correct level o


Alternative user manuals
# User manual Category Download
1 Multiquip BS46H90 User manual Lawn Mower 0
2 Multiquip hda-series User manual Lawn Mower 0
3 Multiquip J36S60 User manual Lawn Mower 0
4 Multiquip R2000H User manual Lawn Mower 0
5 Multiquip HHN-34TVD User manual Lawn Mower 3
6 Multiquip BS46HLE User manual Lawn Mower 0
7 Multiquip CA4HC User manual Lawn Mower 1
8 2Wire 7-1/4 Inch Circular Saw 94245 User manual Lawn Mower 3
9 Agilent Technologies E4371A User manual Lawn Mower 0
10 Agilent Technologies E4370A User manual Lawn Mower 3
11 Agilent Technologies E4374A User manual Lawn Mower 1
12 Adams 22 User manual Lawn Mower 1
13 Agri-Fab 45-0438 User manual Lawn Mower 0
14 Agri-Fab 690 User manual Lawn Mower 0
15 Agri-Fab 45-0361 User manual Lawn Mower 0