Snapper P2167520B (7800429) user manual

User manual for the device Snapper P2167520B (7800429)

Device: Snapper P2167520B (7800429)
Category: Lawn Mower
Manufacturer: Snapper
Size: 1.46 MB
Added : 8/10/2013
Number of pages: 28
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Snapper P2167520B (7800429). Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Snapper P2167520B (7800429).

For your convenience

If looking through the Snapper P2167520B (7800429) user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Snapper P2167520B (7800429) on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Snapper P2167520B (7800429) to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Snapper P2167520B (7800429) User manual - Online PDF
Advertisement
« Page 1 of 28 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Snapper P2167520B (7800429) but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Snapper P2167520B (7800429). If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Safety Instructions & Operator's Manual for
21” STEEL DECK
WALK MOWERS
SERIES 20
Models
RP217020BDV (7800424)
RP2187520BV (7800425)
RP2187520BVE (7800427)
2167520B (7800428)
P2167520B (7800429)
P2187520BV (7800430)
P2187520BVE (7800432)
N2167520B (7800437)
NP2167520B (7800438)
NP2187520BV (7800439)
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained engine power will likely be lower due to operating limitations and environmental fac

Summary of the content on the page No. 2

Thank You for purchasing this quality-built Snapper product. We’re pleased that you placed your confidence in the Snapper brand. When operated and maintained according to the instructions in this manual, your Snapper product will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with the machine and how to avoid them. This machine is designed and intended only for finish cutting of established lawns and is not

Summary of the content on the page No. 3

Operator Safety Features and Controls Operation Maintenance Troubleshooting Warranties Table of Contents Operator Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Important Operator Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Features and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Summary of the content on the page No. 4

Important Operator Safety Instructions ! ! WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of soun

Summary of the content on the page No. 5

Operator Safety Important Operator Safety Instructions (Continued) ! ! Safe Handling of Gasoline Operation (Continued From Previous Page) (Continued From Previous Column) 6. DO NOT fill fuel containers inside a vehicle or on a truck 13. DO NOT operate mower without the entire grass catch- or trailer bed with a plastic liner. Always place the contain- er, or guards in place discharge guard, rear guard or other ers on the ground away from the vehicle before filling. safety devices in place and wor

Summary of the content on the page No. 6

Features and Controls IMPORTANT The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your Snapper dealer if you have questions. G J I K H B A F D C E Features and Controls A. Oil Fill Cap and Dipstick F. Engine Primer (Not all models) B. Fuel Filler Cap G. Blade Control C. Recycling Cover H. Rope Start Handle D. Rear Height Adjustment Latch (2) I. Ground Speed Control E. Front Height Adjustment Latch (2) J. Drive Wheel Co

Summary of the content on the page No. 7

Operation Operation Pre-Start Check List Starting and Operation Make the following checks and perform the service required Engine and Blade (Briggs Quantum and Intek before each start-up. Series Engines) 1. Check the guards, deflectors, grass bag, adapter, and 1. Move the engine speed control to the fast (‘Rabbit’) covers to make sure all are in place and securely position. tightened. 2. Push the primer button (A, Figure 3) three times to 2. Check the blade control (A, Figure 1), wheel drive sta

Summary of the content on the page No. 8

Operation (Continued) Starting and Operation (Continued) Stopping 1. Stop forward motion of the mower by releasing the Engine and Blade (Briggs DOV Series Engines) wheel drive control. 1. Move the engine speed control past the fast (‘Rabbit’) 2. Stop the engine and blade by releasing the blade detent to the ‘Choke’ position. control. 2. Pull the blade control (A, Figure 4) against the handle. 3. Pull the rope start handle (B) to crank the engine. 4. After the engine starts, allow a brief warm-up

Summary of the content on the page No. 9

Operation Operation (Continued) Recycling Operation WARNING ! ! Note: For best recycling results, cut up to a maximum of 1/3 DO NOT attempt any maintenance, adjustments or service of grass blade length and recycle ONLY when grass is dry. with engine and blade running. STOP engine and blade. 1. Set all wheels in the highest cutting position (Notch 7). Disconnect spark plug wire and secure away from spark Refer to the Section entitled “Cutting Height plug. Engine and components are HOT. Avoid seri

Summary of the content on the page No. 10

Operation (Continued) Installing the Grass Bag Adapter WARNING ! ! (Optional Accessory on Some Models) DO NOT attempt any maintenance, adjustments or service 1. Remove the recycling cover. Refer to the Section entitled with engine and blade running. STOP engine and blade. “Recycling Operation”. Disconnect spark plug wire and secure away from spark 2. Install the adapter (A, Figure 11) to the deck in place of plug. Engine and components are HOT. Avoid serious the recycling cover, making sure th

Summary of the content on the page No. 11

Operation Operation (Continued) Installing the Grass Bag WARNING ! ! (Door Type Bag) DO NOT attempt any maintenance, adjustments or service 1. Install the grass bag adapter. Refer to the Section with engine and blade running. STOP engine and blade. entitled “Installing the Grass Bag Adapter”. Disconnect spark plug wire and secure away from spark 2. Install the grass bag by sliding the connector (A, Figure plug. Engine and components are HOT. Avoid serious 13) over the adapter flange. burns, allo

Summary of the content on the page No. 12

Maintenance Check Grease Level in Transmission Maintenance - Introduction 1. Remove the transmission fill plug (A, Figure 15). Roll To retain the quality of the mower, use genuine SNAPPER the machine forward or backward while looking down replacement parts only. Contact a local SNAPPER dealer for into the plug hole. parts and service assistance. For the correct part or 2. If liquid grease is not visible on the input gear (the small information for a particular mower, always mention the gear bel

Summary of the content on the page No. 13

Maintenance Maintenance (Continued) Check Transmission Poly-V Belt WARNING ! ! 1. Visually check the poly-v belt for cracking, fraying, sev- DO NOT attempt any maintenance, adjustments or service ered or exposed belt strands. If worn or damaged, with engine and blade running. STOP engine and blade. replace the belt before operating the mower. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious Service - Periodic burns, allow sufficient time f

Summary of the content on the page No. 14

Maintenance (Continued) A WARNING ! ! B DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury. C Mower Blade Replacement Figure 19: Ninja blade wear limit

Summary of the content on the page No. 15

Maintenance Maintenance (Continued) A WARNING ! ! G B DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. D C Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious E F burns, allow sufficient time for all components to cool. Blade Sharpening (Continued) 4. Sharpen the blade on a grinding wheel at an angle of 22 to 28 degrees (B, Figure 21). DO NOT sharpen the blade beyond the original cutt

Summary of the content on the page No. 16

Maintenance (Continued) Drive Spring Repair/Replacement WARNING ! ! If the drive spring (A, Figure 24) is loose, reconnect. If the DO NOT attempt any maintenance, adjustments or service spring is broken, replace with a new spring. with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark Note: Use a pair of needle nose pliers to install the drive plug. Engine and components are HOT. Avoid serious spring. burns, allow sufficient time for all compo

Summary of the content on the page No. 17

Maintenance Maintenance (Continued) A WARNING ! ! DO NOT attempt any maintenance, adjustments or service B with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Driven Disc Adjustment (Continued) 2. Remove the driven disc spring (A, Figure 26) from the driven disc assembly (B). Also remove the pin and washer (C) from the transfer rod (D

Summary of the content on the page No. 18

Maintenance (Continued) Driven Disc Bearing Replacement WARNING ! ! DO NOT attempt any maintenance, adjustments or service IMPORTANT: The bearing on these machines is staked into with engine and blade running. STOP engine and blade. the thrust plate. The bearing will have to be driven out with a Disconnect spark plug wire and secure away from spark mallet and a large punch. A new bearing with four retaining plug. Engine and components are HOT. Avoid serious screws will have to be purchased to re

Summary of the content on the page No. 19

Maintenance Maintenance (Continued) Belt Service WARNING ! ! On self-propelled mowers, the engine belt (A, Figure 32) DO NOT attempt any maintenance, adjustments or service transmits power from the engine pulley (B) to the drive disc with engine and blade running. STOP engine and blade. (C). The drive disc powers the poly-v belt, which engages the Disconnect spark plug wire and secure away from spark transmission that powers the rear wheels. Should these belts plug. Engine and components are HOT

Summary of the content on the page No. 20

Maintenance (Continued) WARNING ! ! DO NOT attempt any maintenance, adjustments or service A with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious B burns, allow sufficient time for all components to cool. C Engine Drive Belt Replacement (Stretch Type Belts - Continued) D IMPORTANT: Drain the fuel tank before tipping the mower. DO NOT tip the machine with the carburetor or spark plug E down.


Alternative user manuals
# User manual Category Download
1 Snapper "MR" SERIES 17 EMRP216517B User manual Lawn Mower 22
2 Snapper "MR" SERIES 17 MR216017BV User manual Lawn Mower 5
3 Snapper "MR" SERIES 17 MR216517B User manual Lawn Mower 8
4 Snapper "MR" SERIES 17 MR216017B User manual Lawn Mower 1
5 Snapper "MR" SERIES 17 MRP216017B User manual Lawn Mower 3
6 Snapper "MR" SERIES 17 WMR216517B User manual Lawn Mower 0
7 Snapper "MR" SERIES 17 WMR216017B User manual Lawn Mower 1
8 Snapper "MR" SERIES 17 MRP216517B User manual Lawn Mower 2
9 Snapper "MR" SERIES 17 WMR216017BV User manual Lawn Mower 1
10 Snapper "MR" SERIES 17 MRP216017BV User manual Lawn Mower 1
11 Snapper "MR" SERIES 17 WMRP216017B User manual Lawn Mower 0
12 Snapper "MR" SERIES 17 WMRP216517B User manual Lawn Mower 1
13 Snapper 0 User manual Lawn Mower 0
14 Snapper 0-7001 User manual Lawn Mower 2
15 Snapper 06124 User manual Lawn Mower 0
16 2Wire 7-1/4 Inch Circular Saw 94245 User manual Lawn Mower 3
17 Agilent Technologies E4371A User manual Lawn Mower 0
18 Agilent Technologies E4370A User manual Lawn Mower 3
19 Agilent Technologies E4374A User manual Lawn Mower 1
20 Adams 22 User manual Lawn Mower 1