Summary of the content on the page No. 1
DIGITAL VOICE
RECORDER
DS-3000
ONLINE
INSTRUCTIONS
Thank you for purchasing an Olympus
Digital Voice Recorder.
Please read these instructions for information about using
the product correctly and safely.
Keep the instructions handy for future reference.
To ensure successful recordings, we recommend that
you test the record function and volume before use.
1
Summary of the content on the page No. 2
For Safe And General Precautions Correct Usage Do not leave the recorder in hot, humid locations such as inside a closed Thank you for purchasing the Olympus automobile under direct sunlight or on the beach in the summer. Digital Voice Recorder DS-3000. Before Do not store the recorder in places using your new recorder, read this manual exposed to excessive moisture or dust. carefully to ensure that you know how to Do not use organic solvents such as alcohol operate it safely and correctly
Summary of the content on the page No. 3
Batteries AC Adapter Warning Warning • Batteries should never be exposed to • Do not attempt to disassemble, repair or flame, heated, short-circuited or modify the AC adapter in any way. disassembled. • Keep objects including water, metal, or • Do not attempt to recharge alkaline, flammable substances from getting lithium or any other non-rechargeable inside the product. batteries. • Do not moisten the AC adapter or touch • Never use any battery with a torn or it with a wet hand. cracked outer c
Summary of the content on the page No. 4
Main Features The DS-3000 digital voice recorder stores Furthermore, the AS-3000 transcription kit highly compressed DSS audio files on (sold separately) provides you with a PC- SmartMedia cards. footswitch and DSS Player Pro Transcription Module for easy transcription of DSS The DS-3000 supports two recording recordings. modes: SP (Standard Playback) mode and LP (Long Playback) mode ( P.22). The * The recording time available may be shorter than supplied 16MB SmartMedia card can store sp
Summary of the content on the page No. 5
Table of Contents Getting Started SmartMedia ................................................ 6 Identification of Parts ................................. 8 Preparing For Recording Inserting Batteries .................................... 10 Inserting and Ejecting Replacing Batteries .................................. 11 SmartMedia cards ............................. 12 Using the AC Adapter ............................... 11 Setting Time/Date .................................... 14 Basic operation
Summary of the content on the page No. 6
SmartMedia SmartMedia What is SmartMedia? Memory Sizes of SmartMedia Cards SmartMedia is a type of removable IC memory and Approximate Recording Times* card. With more memory than a floppy disk, Memory Size SP Mode LP Mode SmartMedia cards facilitate data exchange with personal computers, and can be used to 4MB 35 min. 1 hr.20 min. store data. Optional SmartMedia cards are 8MB 1 hr.15 min. 2 hr.45 min. available to add capacity as needed, in 16MB 2 hr.35 min. 5 hr.30 min. addition to the include
Summary of the content on the page No. 7
SmartMedia Write-protect SmartMedia A write-protect seal (supplied with SmartMedia card) can be attached to a SmartMedia card to guard against accidental recording, erasing, and formatting. Write-protect area Attach the write-protect seal to the write-protect area to prevent valuable data from being erased accidentally. Remove the write-protect seal before recording or erasing. Notes • Attach the write-protect seal to the write-protect area carefully, without letting the seal stick out, lift, or
Summary of the content on the page No. 8
Identification of Parts Identification of Parts 1 Built-in microphone $ VOLUME control 2 NEW button % Earphone jack 3 REC (Record) /SET button ^ SmartMedia slot 4 REW (Rewind) /– button & Microphone jack 5 FF (Fast Forward) /+ button * SmartMedia ejection switch 6 INDEX button ( POWER/LOCK switch 7 ERASE button ) MICSENS (Microphone sensitivity) 8 Built-in speaker switch 9 FOLDER/MENU button - VCVA switch 0 STOP button = HOLD switch ! PLAY button q Power jack @ Display (LCD panel) w PC (USB) ter
Summary of the content on the page No. 9
Identification of Parts Display (LCD Panel) 1 Folder Stopped State 2 Battery indicator 3 Recording date/time mark Current file number 4 Remaining memory mark Stop position 5 Total file time mark 6 Record mode Total recording time 7 Alarm mark of the file 8 Erase lock mark The display appears as shown above when 9 Current file recording or playback is stopped. 0Current time, elapsed time, You can display the time stamp (date and time) recording time, operation guides, of a recorded file by holdin
Summary of the content on the page No. 10
Inserting Batteries Inserting Batteries Slide open the battery cover. 1 Insert two AAA alkaline batteries, observing the correct polarity. 2 Close the battery cover completely. 3 10
Summary of the content on the page No. 11
Replacing Batteries/Using the AC Adapter Replacing Batteries The battery indicator on the display changes Notes as the batteries lose power. • Be sure to stop the recorder before replacing the batteries. Unloading the batteries while the → → → recorder is recording, erasing or otherwise “BATTERY accessing an audio file may corrupt the file. LOW” • Be sure to replace both batteries at the same time. When the batteries are too weak, the recorder • Never mix old and new batteries, or bat
Summary of the content on the page No. 12
Inserting and Ejecting SmartMedia cards POWER /LOCK OFF ON PLAY STOP INDEX Inserting and Ejecting SmartMedia cards Inserting SmartMedia cards Insert the SmartMedia card into the slot as shown below. Insert the SmartMedia in the correct direction. 1 Push the SmartMedia card fully into position. contact 1 Set the POWER/LOCK switch to area ON. 2 SmartMedia The display appears. slot When the SmartMedia card is inserted properly, “PLEASE WAIT” flashes on the display. .................................
Summary of the content on the page No. 13
Inserting and Ejecting SmartMedia cards POWER /LOCK OFF ON SmartMedia inserted fully into the Ejecting SmartMedia cards slot 1 When you set the POWER/LOCK switch to 2 the ON position, “PLEASE WAIT” flashes on the display. Set the POWER/LOCK switch to OFF. The display disappears. 1 SmartMedia not inserted fully into Raise the SmartMedia ejection switch. the slot Pull the SmartMedia card out with your fingers. 2 Bottom side ..................................................................... of S
Summary of the content on the page No. 14
Setting Time/Date FOLDER /MENU PLAY STOP ERASE INDEX Setting Time/Date If you have set the time and date, information as to when an audio file is recorded is stored automatically with that file. The time and date should be set to ease audio file management tasks. The time and date setting is also needed to perform the alarm playback function ( P.34, 35). Press the FOLDER/MENU button Time/Date Screen for 1 second or longer. 1 The menu opens ( P.50). Press the FF/+ or REW/– button until Minute 2
Summary of the content on the page No. 15
Setting Time/Date Notes • If you press the STOP button during the setup operation, the clock will use the items that were set to that point. • Each press of the NEW button during setting toggles the display between the 12-hour and 24- hour system. 15
Summary of the content on the page No. 16
{ Recording PLAY STOP ERASE FOLDER /MENU INDEX Recording The recorder provides three folders, A, B, and C, and each message recorded in a folder is saved as a Digital Speech Standard (DSS) file. These three folders can be selectively used to distinguish the kind of recording; for example, folder A might be used to store private information, while folder B might be dedicated to holding business information ( P.38, 39). Up to 199 messages can be recorded per folder. Four recording modes are avail
Summary of the content on the page No. 17
Recording Notes To instantly review a recording (Quick • If you press the PLAY button during recording, review) recording will stop, and play will start at the Press the REW/– button while recording, beginning of the file to which you were recording. and release it when you want to start playing • If you press the NEW button during recording, a file. recording will stop, and “NEW FILE” will appear on The recorder plays up to the quick review point, the display (as in Step 2). then stops. • A bee
Summary of the content on the page No. 18
Recording FOLDER /MENU PLAY STOP ERASE INDEX Recording Overwrite Recording You can overwrite a previously recorded file from any point within the file. Note that the overwritten recordings will be erased. Press the FOLDER/MENU button to choose a folder. 1 5 Press the FF/+ or REW/– button 3 several times to choose the file 2 2 into which you want to overwrite. 4,6 See “To fast-forward,” “To skip,” and “To rewind” on page 24. 1 Press the PLAY button to play the file. 3 Press the STOP button where
Summary of the content on the page No. 19
Recording Notes • When you are overwriting and reach the end of the file, the recorder begins to append the additional recording. • Append recording does not erase the next previously recorded file. • Locked files cannot be overwritten ( P.31). • A SmartMedia card with a write-protect seal attached to it cannot be overwritten. • You cannot select any recording mode other than that of the original file before overwrite recording ( P.22). 19
Summary of the content on the page No. 20
Recording FOLDER /MENU PLAY STOP ERASE INDEX Recording Insert Recording Additional recordings can be inserted into previously recorded files. Press the FOLDER/MENU button to choose a folder. 1 5 Press the FF/+ or REW/– button 3 several times to choose the file into 2 2 which you want to insert additional 6 recording. See “To fast-forward,” “To skip,” and “To 1,4 rewind” on page 24. Press the PLAY button to play the file. 3 While playing a file, press the FOLDER/MENU button if you want 4 to inser
