Summary of the content on the page No. 1
OWNER’S MANUAL
1
Summary of the content on the page No. 2
2 3
Summary of the content on the page No. 3
TABLE OF CONTENTS Introduction........................................................................ 4 Seat Post Setup................................................................. 6 Frame Features.................................................................. 7 Frame Geometry................................................................ 8 Schematic and Specifications............................................ 10 Warranty................................................................
Summary of the content on the page No. 4
INTRODUCTION Congratulations on your purchase and welcome to the finest line of suspension bikes available! About this Manual This manual is designed to be used in conjunction with the Bicycle Owner’s Manual and owner’s manuals supplied by the manufacturer of the front and rear suspension components. If you did not receive any of these manuals, download them from the Internet, contact your dealer, or contact us by telephone. There may be more current manuals and technical information availab
Summary of the content on the page No. 5
INTRODUCTION As activities such as racing, jumping, severe off road riding, and stunt riding are extremely dangerous, SAFETY should always be the first consideration. Don’t ride in the race, ride hard off road, try the jump, or do the stunt, UNLESS YOU CAN DO SO SAFELY. Here are some additional recommendations: • Take lessons from a competent instructor first. • Do jumps or stunts only in areas designated for this type of riding. • Start with easy jumps and easy stunts first, and slowly devel
Summary of the content on the page No. 6
SEAT POST SETUP SEATPOST MINIMUM EXTENSION: All Specialized full suspension models with interrupted seat tubes have a small hole to identify the minimum extension allowed for your seatpost. If you cannot see the seatpost tube through this hole, your seatpost is too far extended. If a greater saddle height is required, replace the seatpost with a longer one. � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6 7
Summary of the content on the page No. 7
BIG HIT FSR FRAME FEATURES 1. Main Frame 2. Seatstay 3. Chainstay 4. Shock Link 5. Main Pivot 6. Dropout (Horst) Pivot � � 7. Shock Link at Seatstay Pivot � � � 8. Shock Link at Frame Pivot 9. Lower Shock Eyelet � � 10. Upper Shock Eyelet � 11. Shock � � � 12. Replaceable Derailleur Hanger � � � � 6 7
Summary of the content on the page No. 8
BIG HIT FSR FRAME GEOMETRY Small (mm) Small (in) Medium (mm) Medium (in) Large (mm) Large (in) 1 *Top Tube Length 578 22.76” 597 23.50” 613 24.13” 2 **Standover Height 776 30.55” 777 30.59” 779 30.67” 3 Head Tube Length 128 5.04” 137 5.39” 140 5.51” 4 Head Tube Angle (26” Steep) 68.2º 68.2º 68.2º 68.2º 68.2º 68.2º 4 Head Tube Angle (26” Slack) 66.3º 66.3º 66.3º 66.3º 66.3º 66.3º 5 Seat Tube Angle (26” Steep) 63.1º 63.1º 63.1º 63.1º 63.1º 63.1º 5 Seat Tube Angle (26” Slack) 61º 61º 61º 61º 61º 61
Summary of the content on the page No. 9
BIG HIT FSR FRAME GEOMETRY 1 5 3 2 7 8 6 4 8 9
Summary of the content on the page No. 10
10 11
Summary of the content on the page No. 11
NOTE: Bearing and Bolt Kits are available only through your local Specialized dealer. To retain your warranty and for your safety, all maintenance should be performed by your local Specialized dealer. Bearing Kit Parts Bolt Kit Parts 10 11
Summary of the content on the page No. 12
SBC LIMITED WARRANTY Specialized Bicycle Components, Inc. (“Specialized”), a California corporation located at 15130 Concord Circle, Morgan Hill, California 95037, makes the following Limited Warranty concerning Specialized bicycles and framesets: LIMITED LIFETIME WARRANTY ON BICYCLE FRAMES AND FRAMESETS Subject to the following limitations, terms and conditions, Specialized warrants to the original owner for the lifetime of the original owner of each new Specialized bicycle or frameset that th
Summary of the content on the page No. 13
USEFUL PRODUCT LIFE CYCLE Every Specialized bicycle and frameset has a useful product life cycle. The length of that useful product life cycle will vary with the construction and materials of the bicycle or frameset, the maintenance and care the bicycle or frameset receives over its useful product life cycle, and the type and amount of use the bicycle or frameset is subject to. Uses in competitive events, trick riding, ramp riding, jumping, aggressive riding, riding on severe terrain, riding i
Summary of the content on the page No. 14
15130 Concord Circle Morgan Hill, CA 95037 www.specialized.com © 2003 Specialized Bicycles PN# W2040159 14
