Summary of the content on the page No. 1
ATR2500-USB
Instruction Manual
ATR2500-USB
Cardioid Condenser USB Microphone
Contents
Introduction & features 2
Setting up your microphone with pivot mount & desk stand 3
Preliminary setup with Mac OS X 4
Preliminary setup with Windows XP 6
Preliminary setup with Windows Vista 9
Preliminary setup with Windows 7 10
Using headphones 13
Selecting software 13
Setting your software levels 13
Positioning your microphone 13
Protecting your microphone 13
Specifications 14
War
Summary of the content on the page No. 2
Compliance with FCC rules (USA only) This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Canada only This Class B di
Summary of the content on the page No. 3
ON OFF ATR2500-USB 1 2 3 4 5 6 8 7 1. Windscreen–Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity 2. Capsule–Condenser microphone element with cardioid polar pattern 3. Blue LED–Blue light shows mic is receiving USB power 4. Metal construction–Tough, durable, resilient design 5. Headphone level control–Soft-touch buttons control headphone volume 1 6. Headphone jack– /8-inch (3.5 mm) stereo jack for connecting y
Summary of the content on the page No. 4
Preliminary setup with Mac OS X 1. Plug the free end of the provided USB cable into the USB port on your computer. The microphone’s blue LED will illuminate, indicating the microphone is receiving power.Your computer will automatically recognize the USB device and install a driver. 2. To select the ATR2500-USB as your audio input, first, open your System Preferences. 4
Summary of the content on the page No. 5
3. Next, click Sound to display the Sound preference pane. 4. Click the Input tab and select the ATR2500-USB as the device for sound input. ATR2500-USB USB Your preferences are now set to use the ATR2500-USB on your Mac with GarageBand or another recording program of your choice. 5
Summary of the content on the page No. 6
Preliminary setup with Windows XP (Service Pack 2; other operating systems may vary slightly) 1. Plug the free end of the USB cable into the USB port on your computer. The microphone’s blue LED will illuminate, indicating the mic is receiving power. Your computer will automatically recognize the USB device and install a driver. 2. In the lower right portion of your screen you may see a message that new hardware was found; or you may see a driver software installation notice. 3. To select
Summary of the content on the page No. 7
4. Select Sounds and Audio Devices. 7
Summary of the content on the page No. 8
Preliminary setup with Windows XP (continued) 5. Select the Audio tab, and choose ATR2500-USB as the default device. 6. Adjust computer volume by clicking on the Volume button beneath Sound recording Default device. ATR2500-USB 7. Through the Wave In window, you can set the computer volume or mute the microphone. ATR2500-USB Your preferences are now set to use the ATR2500-USB with Windows XP with the recording program of your choice. 8
Summary of the content on the page No. 9
Preliminary setup with Windows Vista 1. Plug the free end of the USB cable into the USB port on your computer. The microphone’s blue LED will illuminate, indicating the mic is receiving power. Your computer will automatically recognize the USB device and install a driver. 2. In the lower right portion of your screen you may see a message that new hardware was found; or you may see a driver software installation notice. 3. To select the ATR2500-USB as your default recording device, begin
Summary of the content on the page No. 10
Preliminary setup with Windows 7 1. Plug the free end of the USB cable into the USB port on your computer. The microphone’s blue LED light will illuminate, indicating the mic is receiving power. Your computer will automatically recognize the USB device and install a driver. 2. In the lower right portion of your screen you may get a message that new hardware was found; or you may see a driver software installation notice. 3. Start menu > Control Panel > Sound To select the ATR2500-USB as
Summary of the content on the page No. 11
4. Select Sound. 5. The following screen will pop up: 11
Summary of the content on the page No. 12
Preliminary setup with Windows 7 (continued) 6. Select the Recording tab, and choose ATR-USB MIC as the default device. Microphone ATR-USB-Mic Default Device 7. Double click on the ATR-USB-Mic icon to open the Microphone Properties window. Select the levels tab to adjust microphone level (loudness). You may need to come back to this window to readjust the level after you begin recording. Your preferences are now set to use the ATR2500-USB with Windows 7 with the recording program of you
Summary of the content on the page No. 13
Additional Information Using Headphones 1 The /8" (3.5 mm) headphone jack on the bottom of the microphone allows you to directly monitor your recording with a pair of headphones. When your preliminary setup is completed, and your USB microphone is connected to your computer’s USB port (the microphone’s blue LED is illuminated), plug your headphones into the headphone jack on the bottom of the microphone. While talking into the microphone, you should hear yourself in the headphones. Adjust t
Summary of the content on the page No. 14
† ATR2500-USB Specifications Element: Condenser Polar Pattern: Cardioid Frequency Response: 30 – 15,000 Hz Power Requirements: USB Power (5V DC) Bit Depth: 16 bit Sample Rate: 44.1 kHz/48 kHz Weight: 366 g (12.9 oz) Dimensions: 155.0 mm (6.10") long, 50.0 mm (1.97") maximum body diameter Output Connector: USB-type Headphone Output Power: 10 mW @ 16 ohms Headphone Volume Control: Up/Down buttons for level adjustment on front of microphone 1 Headphone Jack: 3.5 mm ( / ”) TRS (stereo) 8 5 Accesso
Summary of the content on the page No. 15
ATR2500-USB U.S. Lifetime Limited Warranty This product is warranted in the U.S.A. by Audio-Technica U.S., Inc. (A.T.U.S.) for the lifetime of the original purchaser. During the warranty period, A.T.U.S. will repair or replace these products, provided they are sent prepaid to the address below, with proof of original purchase and $15.00 for handling and return to a U.S. address. Check or money order required; no cash or stamps. A.T.U.S. reserves the right to replace any product with one of e
Summary of the content on the page No. 16
ATR2500-USB To reduce the environmental impact of a multi-language printed document, product information is available online at www.audio-technica.com in a selection of languages. Afin de réduire l’impact sur l’environnement de l’impression de plusieurs, les informations concernant les produits sont disponibles sur le site www.audio-technica.com dans une large sélection de langue. Para reducir el impacto al medioambiente, y reducir la producción de documentos en varios leguajes, información
