Avanti ProductsMO7103SST user manual

Summary of the content on the page No. 1

Installation & Assembly
Microwave Oven Bracket Installation Instruction

For use with the following Avanti models:

Microwaves – MO7082MB, MO7191TW, MO7192TB, MO7103SST& MO8003BT

Refrigerators – Can be used with all Compact, Midsize & Counterhigh models except the
RM4550W-2, RM4551B-2, RM4589SS-2 and BCA4561B-2

Parts List & Before you start this installation make sure you have all the parts listed below.
Hardware Read entire installation sheet before you start assembly of this item.

Summary of the content on the page No. 2

Instructions below are for refrigerators with a solid top. If installing on refrigerator with a decorative (plastic) top skip to Step #4 2) Installation of the lower side of the Metal bracket to the Refrigerator: Lay and center the Metal bracket on top of the refrigerator as close to the back as possible. Using the four (4) existing holes on the bracket as a guide, mark the locations where the Self Tapping Screws are to be installed (C), (D), (E) and (F). 3) Affixing the Metal bra

Summary of the content on the page No. 3

5) Inserting the Plastic Anchors to the Refrigerator: Insert the four (4) Plastic Anchors provided into the four (4) holes (step 3) in the rear portion of the top of the refrigerator. See illustration # 2 6) Affixing the Metal bracket to the refrigerator Align the four (4) holes of the lower part of the metal bracket to meet the four (4) plastic anchors installed in previous step 4. Attach the lower part of the metal bracket to the refrigerator. Secure with the four (4) Phillips Pa

Summary of the content on the page No. 4

7) Side view of completed installation. Once you have completed all 6 of the above steps the completed Metal bracket will appear as shown in illustration # 5. Illustration # 5 4