Analog Devices AD8342 user manual

User manual for the device Analog Devices AD8342

Device: Analog Devices AD8342
Category: Mixer
Manufacturer: Analog Devices
Size: 0.55 MB
Added : 5/9/2013
Number of pages: 20
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Analog Devices AD8342. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Analog Devices AD8342.

For your convenience

If looking through the Analog Devices AD8342 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Analog Devices AD8342 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Analog Devices AD8342 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Analog Devices AD8342 User manual - Online PDF

Explore the detailed user manual for Analog Devices remarkable creation, Model AD8342. Gain valuable insights and instructions to maximize your device's capabilities and optimize your user experience. Uncover the full potential of your Analog Devices AD8342 device through this comprehensive user manual, offering step-by-step guidance and expert tips for effortless operation and enjoyment.

Advertisement
« Page 1 of 20 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Analog Devices AD8342 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Analog Devices AD8342. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1


Active Receive Mixer
LF to 500 MHz


AD8342

FEATURES FUNCTIONAL BLOCK DIAGRAM
Broadband RF port: LF to 500 MHz VPDC PWDN EXRB COMM
9
Conversion gain: 3.7 dB 12 11 10
Noise figure: 12.2 dB
COMM 8 COMM
13 BIAS
Input IP3: 22.7 dBm
RFCM 14 7 IFOP
Input P1dB: 8.3 dBm AD8342
LO drive: 0 dBm RFIN
15 6 IFOM
Differential high impedance RF input port
VPMX 16 5 COMM
Single-ended, 50 Ω LO input port
3 4
1 2
Single-supply operation: 5 V @ 98 mA
VPLO LOCM LOIN COMM
Power-down mode

Exposed paddl

Summary of the content on the page No. 2

AD8342 TABLE OF CONTENTS Specifications..................................................................................... 3 AC Interfaces................................................................................... 15 AC Performance ............................................................................... 4 IF Port .......................................................................................... 16 Spur Table .........................................................

Summary of the content on the page No. 3

AD8342 SPECIFICATIONS VS = 5 V, TA = 25°C, fRF = 238 MHz, fLO = 286 MHz, LO power = 0 dBm, ZO = 50 Ω, R BIAS = 1.82 kΩ, RF termination = 100 Ω, IF termi- nated into 100 Ω through a 2:1 ratio balun, unless otherwise noted. Table 1. Parameter Conditions Min Typ Max Unit RF INPUT INTERFACE Return Loss Hi-Z input terminated with 100 Ω off-chip resistor 10 dB Input Impedance Frequency = 238 MHz (measured at RFIN with RFCM ac- 1||0.4 kΩ||pF grounded) DC Bias Level Intern

Summary of the content on the page No. 4

AD8342 AC PERFORMANCE VS = 5 V, TA = 25°C, LO power = 0 dBm, ZO = 50 Ω, R BIAS = 1.82 kΩ, RF termination 100 Ω, IF terminated into 100 Ω via a 2:1 ratio balun, unless otherwise noted. Table 2. Parameter Conditions Min Typ Max Unit 1 RF FREQUENCY RANGE 50 500 MHz 1 LO FREQUENCY RANGE High side LO 60 850 MHz 1 IF FREQUENCY RANGE 10 350 MHz CONVERSION GAIN f = 460 MHz, f = 550 MHz, f = 90 MHz 3.2 dB RF LO IF fRF = 238 MHz, fLO = 286 MHz, fIF = 48 MHz 3.7 dB SS

Summary of the content on the page No. 5

AD8342 SPUR TABLE VS = 5 V, TA = 25°C, RF and LO power = 0 dBm, fRF = 238MHz, fLO = 286MHz, ZO = 50 Ω, R BIAS = 1.82 kΩ, RF termination 100 Ω, IF terminated into 100 Ω via a 2:1 ratio balun. Note: Measured using standard test board. Typical noise floor of measurement system = −100 dBm. Table 3. m nfRF − mfLO 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 0 <−100 −25 −54 −28 −45 −35 −39 −36 −42 −57 −44 −42 −41 −46 −59 1 −39 3.5 −42 −6 −48 −16 −50 −28 −57 −37 −68 −45 −54 −37 −61 2 −52 −47 −51 −4

Summary of the content on the page No. 6

AD8342 ABSOLUTE MAXIMUM RATINGS Table 4. Stresses above those listed under Absolute Maximum Ratings Parameter Rating may cause permanent damage to the device. This is a stress Supply Voltage, V 5.5 V S rating only; functional operation of the device at these or any RF Input Level 12 dBm other conditions above those indicated in the operational sec- LO Input Level 12 dBm tion of this specification is not implied. Exposure to absolute PWDN Pin VS + 0.5 V maximum rating

Summary of the content on the page No. 7

AD8342 PIN CONFIGURATION AND FUNCTION DESCRIPTIONS PIN 1 INDICATOR VPLO 1 12 VPDC LOCM 2 11 PWDN AD8342 LOIN 3 10 EXRB TOP VIEW (Not to Scale) COMM 4 9 COMM Figure 2. 16-Lead LFCSP Table 5. Pin Function Descriptions Pin No. Mnemonic Function 1 VPLO Positive Supply Voltage for the LO Buffer: 4.75 V to 5.25 V. 2 LOCM AC Ground for Limiting LO Amplifier. Internally biased to Vs − 1.6 V. AC-couple to ground. 3 LOIN LO Input. Nominal input level 0 dBm. Input level range −10 dBm t

Summary of the content on the page No. 8

AD8342 TYPICAL PERFORMANCE CHARACTERISTICS VS = 5 V, TA = 25°C, RF power = −10 dBm, LO power = 0 dBm, ZO = 50 Ω, R BIAS = 1.82 kΩ, RF termination 100 Ω, IF t erminated into 100 Ω via a 2:1 ratio balun, unless otherwise noted. 6 6 5 5 RF = 238MHz IF = 48MHz 4 4 RF = 460MHz 3 3 IF = 140MHz IF = 10MHz IF = 90MHz 2 2 1 1 50 100 150 200 250 300 350 400 450 500 550 10 50 100 150 200 250 300 350 RF FREQUENCY (MHz) IF FREQUENCY (MHz) Figure 6. Conversion Gain vs. IF Frequency Figure 3. Conve

Summary of the content on the page No. 9

AD8342 27 27 26 26 25 25 IF = 48MHz 24 24 IF = 10MHz IF = 90MHz 23 23 RF = 460MHz 22 22 RF = 238MHz 21 21 IF = 140MHz 20 20 19 19 18 18 17 17 50 100 150 200 250 300 350 400 450 500 550 10 50 100 150 200 250 300 350 RF FREQUENCY (MHz) IF FREQUENCY (MHz) Figure 9. Input IP3 vs. RF Frequency Figure 12. Input IP3 vs. IF Frequency 27 27 26 26 25 25 IF = 48MHz 24 IF = 10MHz 24 23 23 22 22 21 140MHz 21 IF = 90MHz 20 20 19 19 18 18 17 17 –15 –13 –11 –9 –7 –5 –3 –1 1 3 5 4.75 4.80 4.85 4.90 4.9

Summary of the content on the page No. 10

AD8342 13 10 12 9 RF = 460MHz 11 8 10MHz 90MHz 10 7 RF = 238MHz 9 6 8 5 48MHz 7 4 140MHz 6 3 5 2 4 1 3 0 50 100 150 200 250 300 350 400 450 500 550 10 50 100 150 200 250 300 350 RF FREQUENCY (MHz) IF FREQUENCY (MHz) Figure 15. Input P1dB vs. RF Frequency Figure 18. Input P1dB vs. IF Frequency 10.0 10 9.5 9 9.0 IF = 10MHz 8 IF = 90MHz 8.5 7 8.0 6 IF = 140MHz 7.5 5 IF = 48MHz 7.0 4 6.5 3 6.0 2 5.5 1 5.0 0 –15 –13 –11 –9 –7 –5 –3 –1 1 3 5 4.75 4.85 4.95 5.05 5.15 5.25 LO LEVEL (dBm) VPOS

Summary of the content on the page No. 11

AD8342 60 60 IF = 90MHz IF = 10MHz RF = 238MHz RF = 460MHz IF = 140MHz 50 50 40 40 IF = 48MHz 30 30 20 20 10 10 0 0 100 150 200 250 300 350 400 450 500 550 10 50 100 150 200 250 300 350 RF FREQUENCY (MHz) IF FREQUENCY (MHz) Figure 21. Input IP2 vs. RF Frequency (Second RF = R F - 50 MHz) Figure 24. Input IP2 vs. IF Frequency (Second RF = R F - 50 MHz) 60 60 58 58 IF = 10MHz 56 56 IF = 48MHz 54 54 52 52 50 50 48 48 IF = 90MHz 46 46 IF = 140MHz 44 44 42 42 40 40 –15 –13 –11 –9 –7 –5 –3 –

Summary of the content on the page No. 12

AD8342 16 30 NORMAL MEAN = 12.25 STD. DEV. = 0.14 15 25 NF PERCENTAGE 14 20 NF = 140MHz NF = 90MHz 13 15 12 10 NF = 10MHz NF = 48MHz 11 5 10 0 –15 –13 –11 –9 –7 –5 –3 –1 1 3 5 11.8 11.9 12.0 12.1 12.2 12.3 12.4 12.5 12.6 12.7 12.8 LO POWER (dBm) NOISE FIGURE (dB) Figure 27. Noise Figure vs. LO Power, f = 238 MHz Figure 30. Noise Figure Distribution, f = 238 MHz, f = 286 MHz RF RF LO 30 105 5.0 4.5 25 100 4.0 INPUT IP3 3.5 20 95 3.0 2.5 15 90 2.0 NOISE FIGURE 10 85 1.5 CURRENT 1.0 5 80

Summary of the content on the page No. 13

AD8342 0 120 –10 100 –20 –30 80 –40 60 –50 –60 40 –70 20 –80 –90 0 50 250 450 650 850 –40 –20 0 20 40 60 80 LO FREQUENCY (MHz) TEMPERATURE ( °C) Figure 33. LO to RF Leakage vs. LO Frequency, LO Power = 0 dBm Figure 36. Supply Current vs. Temperature 0 0 –5 –2 –10 –4 –15 –6 –20 –8 IF = 10MHz –25 –10 –30 –12 –35 –14 –40 –16 IF = 48MHz –45 –18 50 100 150 200 250 300 350 400 450 500 550 60 160 260 360 460 560 660 760 860 RF FREQUENCY (MHz) LO FREQUENCY (MHz) Figure 34. RF to IF Feedthr

Summary of the content on the page No. 14

AD8342 CIRCUIT DESCRIPTION EXTERNAL The AD8342 is an active mixer optimized for operation within BIAS VPDC RESISTOR PWDN the input frequency range of near dc to 500 MHz. It has a dif- ferential, high impedance RF input that can be terminated or BIAS matched externally. The RF input can be driven either single- ended or differentially. The LO input is a single-ended 50 Ω RFIN IFOP V TO input. The IF outputs are differential open-collectors. The mixer I IFOM RFCM current can be adjusted by

Summary of the content on the page No. 15

AD8342 AC INTERFACES The AD8342 is designed to downconvert radio frequencies (RF) Table 4. Dynamic Performance for Various Input Networks to lower intermediate frequencies (IF) using a high or low-side Input 50 Ω 100 Ω 500 Ω Matched local oscillator (LO). The LO is injected into the mixer core at a Network Shunt Shunt Shunt (Fig. 40) frequency higher or lower than the desired input RF. The Gain (dB) 0.66 3.5 5.3 9.3 difference between the LO and the RF , f − f (high side) or LO RF, I

Summary of the content on the page No. 16

AD8342 IF PORT The high input impedance of the AD8351 allows for a shunt differential termination to provide the desired 100 Ω lo ad to the The IF port comprises open-collector differential outputs. The AD8342 IF output port. NPN open collectors can be modeled as current sources that are shunted with resistances of ~10 kΩ in p arallel with capacitances It is necessary to bias the open-collector outputs using one of of ~1 pF. the schemes presented in Figure 47 and Figure 48. Figure

Summary of the content on the page No. 17

AD8342 +V 30 S AD8342 MODELED 25 COMM 8 2:1 IF OUT Z = 50 Ω IFOP 7 O 20 IFOM 6 MEASURED 15 COMM 5 Z = 100 Ω L Figure 47. Biasing the IF Port Open-Collector Outputs 10 Using a Center-Tapped Impedance Transformer +V 5 S AD8342 0 COMM 8 RFC 10 100 1000 IF OUT+ IF LOAD ( Ω) IFOP 7 IMPEDANCE Z = 100 Ω TRANSFORMING Z L L NETWORK IFOM 6 Figure 49. Voltage Conversion Gain vs. IF Loading IF OUT– RFC COMM 5 LO CONSIDERATIONS The LOIN port provides a 50 Ω load impedance with common- +V S mode d

Summary of the content on the page No. 18

AD8342 HIGH IF APPLICATIONS production concerns due to the sensitivity of the match. For In some applications it may be desirable to use the AD8342 as this application, it is advantageous to shunt down the ~1 kΩ an up-converting mixer. The AD8342 is a broadband mixer input impedance using an external shunt termination resistor capable of both up and down conversion. Unlike other mixers to allow for a lower Q reactive matching network. The input is that rely on on-chip reactive circu

Summary of the content on the page No. 19

AD8342 EVALUATION BOARD An evaluation board is available for the AD8342. The evaluation board is configured for single-ended signaling at the IF output port via a balun transformer. The schematic for the evaluation board is presented in Figure 53. R8 PWDN PWDN C11 10k Ω 100pF W1 R6 R9 GND VPOS R7 0 Ω VPOS 1.82k Ω 0 Ω C12 C13 0.1 µF 100pF 12 11 10 9 VPDC PWDN EXRB COMM Z2 OPEN R3 OPEN R10 13 COMM COMM 8 0 Ω IF_OUT+ C1 T1 L1 1000pF Z1 50 Ω 34 0 Ω OPEN TRACE 14 7 RFCM IFOP R12 100 Ω TRACES, 2

Summary of the content on the page No. 20

AD8342 Preliminary Technical Data OUTLINE DIMENSIONS 0.50 0.40 0.30 3.00 0.60 MAX BSC SQ * 1.65 13 16 0.45 1 12 1.50 SQ PIN 1 1.35 2.75 TOP EXPOSED INDICATOR BSC SQ VIEW PAD (BOTTOM VIEW) 9 4 8 5 0.50 BSC 0.25 MIN 1.50 REF 0.80 MAX 12° MAX 0.65 TYP 0.90 0.85 0.05 MAX 0.80 0.02 NOM SEATING 0.30 PLANE 0.20 REF 0.23 0.18 * COMPLIANT TO JEDEC STANDARDS MO-220-VEED-2 EXCEPT FOR EXPOSED PAD DIMENSION. Figure 54. 16-Lead Lead Frame Chip Scale Package [LFCSP_VQ] 3 mm x 3 mm Body, Very Thin Quad


Alternative user manuals
# User manual Category Download
1 Edelbrock 15621 User manual Mixer 0
2 Sony Atrac3/MP3 CD Walkman D-NE300 User manual Mixer 51
3 AMF Stationary Bowl(SBM) User manual Mixer 3
4 AMF Offset Tilt Bowl(OTBM) User manual Mixer 7
5 AMF Glen 340 User manual Mixer 39
6 AMF None User manual Mixer 1
7 AMF TILT Bowl(TBM) User manual Mixer 4
8 AMF U2 User manual Mixer 3
9 Avanti ProductsCK3016 User manual Mixer 0
10 Black & Decker GM200 User manual Mixer 19
11 Black & Decker M200P User manual Mixer 3
12 Black & Decker EHC650 User manual Mixer 5
13 Black & Decker GDM100 User manual Mixer 0
14 Black & Decker M22S User manual Mixer 7
15 Black & Decker M175W User manual Mixer 5