Summary of the content on the page No. 1
1993 to Present
SPARE PART AND OPERATION MANUAL
FOOD MIXER
Model W20, A, J, F
Summary of the content on the page No. 2
Caution -READ BEFORE OPERATING- Caution Varimixer recommends that mixer operators be at least 18 years of age and be thoroughly trained on the use of the mixer. Varimixer recommends that the following precautions be adopted to help make the mixer operation safer and more efficient. ........- All operators should be at least 18 years of age. - All operators should be thoroughly trained before being allowed to operate the mixer. - NEVER reach into the bowl when the mixer is running. - Do not
Summary of the content on the page No. 3
LIMITED WARRANTY EXCLUSIONS Varimixer warrants its commercial mixers to the original purchaser against defects in material or manufacture for a period of one year from the date of original purchase, subject to the following exclusions and limitations. The warranties provided by Varimixer do not apply in the following instances: 1. In the event that the equipment is improperly installed. Proper installation is the responsibility of the installer, proper installation pro- cedures are covered in th
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Summary of the content on the page No. 6
Summary of the content on the page No. 7
Summary of the content on the page No. 8
Summary of the content on the page No. 9
Summary of the content on the page No. 10
Summary of the content on the page No. 11
Body 1 2 3 4 5 6 7 8 9 10 14 13 15 12 11 16 5
Summary of the content on the page No. 12
Body Figure Number Description Part Number 1. Screw STA 5233 2. Top Lid (Painted) 20D-21 3. Rear Access Plate 20N-291 4. Bushing (Lift Handle) STA 2515 5. Upper Column 20N-22.17 6. Plug Button STA 6561 7. Bushings STA 2514 (each) 8. Column Seal 20N-207 9. Plug Button STA 6511 10. Lower Column 20N-22.30 11. Bolt M8X20 STA 5631 12. Leg Left 20N-25.1 13. Leg Right 20N-25.2 14. Plug Button STA 6560 15. Rubber Foot 20N-218 16. NSF Cover Plate 20N-304 6
Summary of the content on the page No. 13
Bowl Arms 1 7 6 2 3 4 10 5 8 11 9 12 13 15 14 16 19 17 18 20N-65.1Z 20N-62Z 20N-65.1M 7
Summary of the content on the page No. 14
Bowl Arms Figure Number Description Part Number 1. Ball (Black) STA 3306 2. Bowl Lift Lever 20N-62Z 3. Washer STA 6066 4. Disc With Arrow 20N47.10 5. Retaining Disc 20N-47.11 6. Crank Arm 20N-63M 7. Cotter Pin STA 6204 8. Key STA 2019 9. Snap Ring STA 3407 10. Lift Nut 20N-65.1Z 11. Jam Nut STA 5825 12. Lift Bolt 20N-83.1 13. Bowl Arm Shaft 20N-68.1M 14. Snap Ring 25U STA 3410 15. Bowl Arm 20N-23 16. Snap Ring 25U STA 3410 17. Bowl Lift Lever Assembly 20N-62Z 18. Lift Bolt Assembly 20N-65.1M 19.
Summary of the content on the page No. 15
1 2 3 4 5 6 7 8 12 13 9 14 15 10 16 20 17 11 21 18 22 19 23 24 25 27 28 26 29 30 31 32 33 20N-2.1Z 20N-3 20N-2.1M 20N-2 34 35 20-36 20N-30 20-33 20N-101
Summary of the content on the page No. 16
Planetary Head Figure Number Description Part Number 1. Snap Ring STA 3414 2. Bearing 6206 20-98 3. Snap Ring STA 3518 4. Bolt M6X16 STA 5432 5. Main Bearing Head 20N-3 6. Snap Ring STA 3518 7. Bearing 6206 20-98 8. Distance Piece 20-37 9. Gear Wheel Rim 20N-1 10. Bolt M8X30 STA 5626 11. Main Shaft 20N-30 12. Snap Ring STA 3470 13. Eccentric Disc 20-36 14. Bearing 6006 20-100 15. Snap Ring STA 3515 16. Snap Ring STA 3414 17. Seal 20N-108R 18. Needle Bearing Race See item 25 19. Groove Pin STA 6
Summary of the content on the page No. 17
Attachment Drive 1 2 3 4 5 6 7 8 9 11 10 12 13 14 15 1 1/2” 2” I.D. I.D. 20N-10.6M 20N-10.5M 20N-10.6M #17 Hub #12 Hub 13
Summary of the content on the page No. 18
Attachment Drive Figure Number Description Part Number 1. Snap Ring STA 3410 2. Wormwheel 20N-9 3. Snap Ring STA 3512 4. Bearing 15-105 5. Distance Piece 20N-37 6. Bearing 15-105 7. Key STA 2031 8. Shaft F/ #17 Hub 20N-50 8A. Shaft F/ #12 Hub 20J-50 9. O-ring STA 3127 10. Hub F/ #17 (2” I.D.) 20N-8 10A. Hub F/ #12 (1 1/2” I.D.) 20J-8 11. Thumb Screw F/ #17 STA 5561 11A. Thumb Screw F/ #12 4R-125 12. Gasket 20N-211 13. Lock Washer STA 6038 14. Bolt STA 5631 15. Cover F/ #17 15-214 15A. Cover F/
Summary of the content on the page No. 19
Summary of the content on the page No. 20
Transmission W20 93-Present Fig. No. Order Number Description 1 20N-13M Pulley assembly (Motor) 3 60-285 Pin 5 STA 5604 Pointed Screw M8 x 16 6 STA 3220 Grease Nipple 7 STA 3410 Snap Ring 8 20N-227 Spring Holder 9 20N-228 Rubber Ring 10 20N-275 Spring Holder 12 STA 2505 Bearing Bushing MB0610DU 13 20N-46 Toothed Rack Shaft 14 STA 5451 Screw M8 x 16 15 STA 6028 Washer 16 STA 3407 Snap Ring 19U 17 20N-16.1 Lower Fork 18 20N-16.5 Spring 19 20N-305 Pin Bolt 20 STA 5452 Screw M8 x 50 21 STA 5812 Nu
