Summary of the content on the page No. 1
Summary of the content on the page No. 2
MultiModemZBA Quick Start Guide Model MT5634ZBA-V92 P/N 82090150 Revision A (9/7/01) Copyright © 2001 by Multi-Tech Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Further
Summary of the content on the page No. 3
MultiModemZBA Quick Start Guide Getting Started Congratulations on your purchase of the MT5634ZBA-V92 modem. You have acquired one of the finest V.92 data/fax modems available today from one of the world’s oldest modem manufacturers: Multitech Systems, Inc. This Quick Start Guide will help you install and set up your User Guide containing instructions on how to modem. A full use the V.92 Modem on Hold feature, detailed configuration information, a command reference, a troubleshooting chapter, a
Summary of the content on the page No. 4
MultiModemZBA Quick Start Guide A localization kit is included with the modem in some countries and purchased separately in others. The kit can include any or all of the following items: 4 An RJ-11 telephone cable 4 An adapter to connect the RJ-11 cable to your local telephone service 4 A country-specific power cord The following illustration shows how the modem is packaged for different counties. Please use this information to check the contents of your package. ./-0 12, (+45
Summary of the content on the page No. 5
MultiModemZBA Quick Start Guide The localization kit order number for your country can be found at http://www.multitech.com/GlobalModem/order/localkits.asp If any item is missing, please contact Multi-Tech Systems or your dealer/distributor (see Appendix D of the User Guide for informa- tion on contacting Multi-Tech via telephone, fax, or the Internet). What You Will Need In addition to the contents of the MultiModemZBA package, you will need the following items: 4 A computer with an unused seri
Summary of the content on the page No. 6
MultiModemZBA Quick Start Guide Avoid using a telephone during an electrical storm; there is a risk of electrical shock from lightning. Do not use a telephone in the vicinity of a gas leak. Step 1: Mount the Feet The modem comes with a strip of self-adhesive plastic feet, which you can optionally mount on the modem. To install the feet, simply peel them from their paper strip and press them into the recesses on the bottom of the modem. Figure 2. Mounting the feet Step 2: Change the Internal
Summary of the content on the page No. 7
MultiModemZBA Quick Start Guide Step 3: Connect the Modem to Your System Turn off your computer. Placing the modem in a convenient location, connect it to your computer’s serial port, to the tele- phone line or leased line, to AC power, and, optionally, to your telephone. PWR RS232 PHONE LINE Figure 3. MultiModemZBA connections 5
Summary of the content on the page No. 8
MultiModemZBA Quick Start Guide RS232 Connection Plug one end of the serial cable into the RS232 connector on the modem, and the other end into a serial port connector on your computer, such as COM1 or COM2. Dial-Up Connection Plug one end of the modular telephone cable into the modem’s LINE jack, and the other end into a standard telephone wall jack. Note: The LINE jack is not interchangeable with the PHONE jack. Do not plug the telephone into the LINE jack or the line cable into the PHONE jack
Summary of the content on the page No. 9
MultiModemZBA Quick Start Guide Telephone Connection If you want to connect a telephone to the same line as the modem, plug it into the modem’s PHONE jack. Note: The PHONE jack is not interchangeable with the LINE jack. Do not plug the telephone into the LINE jack or the line cable into the PHONE jack. Power Connection The power switch is located on the right side of the modem. Make sure it is set to OFF. Plug the the universal power supply into the PWR jack on the modem. Then plug one end of th
Summary of the content on the page No. 10
MultiModemZBA Quick Start Guide Step 4: Install the Modem Driver If you use Windows 95 or above, you must install the modem driver. The MTMoh Modem on Hold program is installed at the same time (see Chapter 7 in the User Guide). If you use another operating system, please see the User Guide. 1. Make sure your modem is connected properly, and then turn on your computer. Windows should detect your new modem and open the Install New Modem wizard. Note: If Windows cannot find a modem, your modem may
Summary of the content on the page No. 11
MultiModemZBA Quick Start Guide 5. A list of modems appears. Select your modem from the list, and then click Next. 6. Select the port the modem is connected to, and then click Next. 7. Windows installs the modem driver and MTMoh program. 8. Click Finish to exit. Step 5: Configure the Modem for Your Country Before you use your modem, you must configure it for the country in which it will be used. You must also do this if you move the modem to another country after it has been configured for the f
Summary of the content on the page No. 12
MultiModemZBA Quick Start Guide 4. Select the country in which the modem will be used, and then click Next. 5. Review your choice of country. If it is correct, click Next to configure the modem. 6. When Global Wizard announces that the parameters have been set, click Finish to exit. AT Commands Non-Windows users can configure the modem using AT com- mands. You must enter these commands in your communica- tion program’s terminal window. 1. Run your favorite communication program and open the prog
Summary of the content on the page No. 13
MultiModemZBA Quick Start Guide Country AT command Result code (hexadecimal) (decimal) Euro/NAM AT%T19,0,34 (default) 52 Australia AT%T19,0,01 01 Czech Republic AT%T19,0,25 37 Hong Kong AT%T19,0,30 48 Hungary AT%T19,0,30 48 India AT%T19,0,30 48 Indonesia AT%T19,0,30 48 Japan AT%T19,0,10 16 Korea AT%T19,0,30 48 New Zealand AT%T19,0,09 09 Phillipines AT%T19,0,30 48 Poland AT%T19,0,30 48 Singapore AT%T19,0,30 48 South Africa AT%T19,0,35 53 Slovenia AT%T19,0,30 48 All others AT%T19,0,34 (default) 52
Summary of the content on the page No. 14
MultiModemZBA Quick Start Guide Step 6: Install and Configure Your Software You may use either the communication program included with your modem or a third-party program. Communication programs designed for Windows 95 and above normally do not need to be manually configured, since they use the Plug and Play con- figuration of the Windows modem driver. Communication pro- grams designed for other operating systems, however, may need to be manually configured. If you need advice on config- uring s
Summary of the content on the page No. 15
Summary of the content on the page No. 16
Patents This device is covered by one or more of the following patents: 6,031,867; 6,012,113; 6,009,082; 5,905,794; 5,864,560; 5,815,567; 5,815,503; 5,812,534; 5,809,068; 5,790,532; 5,764,628; 5,764,627; 5,754,589; D394,250; 5,724,356; 5,673,268; 5,673,257; 5,644,594; 5,628,030; 5,619,508; 5,617,423; 5,600,649; 5,592,586; 5,577,041; 5,574,725; D374,222; 5,559,793; 5,546,448; 5,546,395; 5,535,204; 5,500,859; 5,471,470; 5,463,616; 5,453,986; 5,452,289; 5,450,425; D361,764; D355,658; D355,653; D353
