Summary of the content on the page No. 1
(802.11g) ADSL2+ Modem Router
User’s Manual
Revision 1.0
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Table of Contents Table of Contents CHAPTER 1: INTRODUCTION ............................................................................................................. 1 INTRODUCTION TO YOUR ROUTER ............................................................................................................. 1 FEATURES.................................................................................................................................................. 1 CHAPTER 2: INSTALLIN
Summary of the content on the page No. 4
Firmware Upgrade ....................................................................................................................... 54 Backup / Restore........................................................................................................................... 55 Restart Router............................................................................................................................... 56 User Management....................................................
Summary of the content on the page No. 5
Hurricane 9300G (802.11g) ADSL2+ Modem Router
Introduction to your Router Welcome to the (802.11g) ADSL2+ Modem Router. The router is an “all-in-one” unit, combining an ADSL modem, ADSL router with four-port 10/100M auto-crossover Switch, and Firewall, enabling you to maximize the potential of your existing resources. The router can provide everything you need to get the machines on y
Summary of the content on the page No. 6
Hurricane 9300G (802.11g) ADSL2+ Modem Router Universal Plug and Play (UPnP) and UPnP NAT Traversal This protocol is used to enable simple and robust connectivity among stand-alone devices and PCs from many different vendors. It makes network simple and affordable for users. UPnP architecture leverages TCP/IP and the Web to enable seamless proximity networking in addition to control and data transfer among networked devices. With this feature enabled, users can now connect to Net
Summary of the content on the page No. 7
Hurricane 9300G (802.11g) ADSL2+ Modem Router Static and RIP1/2 Routing Supports an easy static routing table or RIP1/2 routing protocol to support routing capability. Simple Network Management Protocol (SNMP) It is an easy way to remotely manage the router via SNMP. Web based GUI Supports web based GUI for configuration and management. It is user-friendly and comes with on- line help. It also supports remote management capability for remote users to configure and manage th
Summary of the content on the page No. 8
Hurricane 9300G (802.11g) ADSL2+ Modem Router
Important note for using the (802.11g) ADSL2+ Router Do not use this router in high humidity or high temperatures. Do not use the same power source for this router as other equipment. Do not open or repair the case yourself. If this router is too hot, turn off the power imme
Summary of the content on the page No. 9
Hurricane 9300G (802.11g) ADSL2+ Modem Router The Front LEDs LED Description Lit steady when there is a PPPoA / PPPoE connection. 13 INTERNET Lit and flashed periodically when there is email in the Inbox. When lit, it indicates that the ADSL (Line) port is connected to 12 ADSL the DSLAM and working properly. ETHERNET Port Lit when the LAN link is connected to an Ethernet device. 8-11 1X — 4X Green for 100Mbps; Orange for 10Mbps. (RJ-45 connector) Blinking w
Summary of the content on the page No. 10
Hurricane 9300G (802.11g) ADSL2+ Modem Router The Rear Ports 4 3 1 6 5 2 Port Meaning Power Switch 1 Power ON/OFF switch PWR 2 Connect the supplied power adapter to this jack. After the device is powered on, press it to reset the device or restore to factory default settings. 3 RESET 0-3 seconds: reset the device 6 seconds above: restore to factory default settings (this is used when you cannot login to the router. E.g.: forgot the password) LAN Con
Summary of the content on the page No. 11
Hurricane 9300G (802.11g) ADSL2+ Modem Router Cabling The most common problem associated with Ethernet is bad cabling or ADSL line(s). Make sure that all connected devices are turned on. On the front of the product is a bank of LEDs. Verify that the LAN Link and ADSL line LEDs are lit. If they are not, verify that you are using the proper cables. Ensure that all other devices connected to the same telephone line as your router (e.g. telephones, fax machines, analogue modems) have a li
Summary of the content on the page No. 12
Hurricane 9300G (802.11g) ADSL2+ Modem Router
(802.11g) ADSL2+ Modem router can be configured with your web browser. The web browser is included as a standard application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me, etc. The product provides a very easy and user-friendly interface for configuration. PCs must have an Ethernet inter
Summary of the content on the page No. 13
Hurricane 9300G (802.11g) ADSL2+ Modem Router Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections. 2. Double-click Local Area Connection. (See Figure 3.1) Figure 3.1: LAN Area Connection 3. In the Local Area Connection Status window, click Properties. (See Figure 3.2) Figure 3.2: LAN Connection Status 9 Chapter 3: Basic Installation
Summary of the content on the page No. 14
Hurricane 9300G (802.11g) ADSL2+ Modem Router 4. Select Internet Protocol (TCP/IP) and click Properties. (See Figure 3.3) Figure 3.3: TCP / IP 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. (See Figure 3.4) 6. Click OK to finish the configuration. Figure 3.4: IP Address & DNS Configuration 10 Chapter 3: Basic Installation
Summary of the content on the page No. 15
Hurricane 9300G (802.11g) ADSL2+ Modem Router Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. (See Figure 3.5) Figure 3.5: LAN Area Connection 3. In the Local Area Connection Status window, click Properties. (See Figure 3.6) Figure 3.6: LAN Connection Status 11 Chapter 3: Basic Installation
Summary of the content on the page No. 16
Hurricane 9300G (802.11g) ADSL2+ Modem Router 4. Select Internet Protocol (TCP/IP) and click Properties. (See Figure 3.7) Figure 3.7: TCP / IP 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. (See Figure 3.8) 6. Click OK to finish the configuration. Figure 3.8: IP Address & DNS Configuration 12 Chapter 3: Basic Installation
Summary of the content on the page No. 17
Hurricane 9300G (802.11g) ADSL2+ Modem Router Configuring PC in Windows 95/98/ME 1. Go to Start / Settings / Control Panel. In the Control Panel, double- click on Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. (See Figure 3.9) 3. Click Properties. Figure 3.9: TCP / IP 4. Select the IP Address tab. In this page, click the Obtain an IP address automatically r
Summary of the content on the page No. 18
Hurricane 9300G (802.11g) ADSL2+ Modem Router 5. Then select the DNS Configuration tab. (See Figure 3.11) 6. Select the Disable DNS radio button and click OK to finish the configuration. Figure 3.11: DNS Configuration 14 Chapter 3: Basic Installation
Summary of the content on the page No. 19
Hurricane 9300G (802.11g) ADSL2+ Modem Router Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double- click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. (See Figure 3.12) Figure 3.12: TCP / IP 3. Select the Obtain an IP address from a DHCP server radio button and click OK. (See Figure 3.13) Figure 3.13: IP Address 15 Chapter 3: Basic Installation
Summary of the content on the page No. 20
Hurricane 9300G (802.11g) ADSL2+ Modem Router Factory Default Settings Before configuring your, you need to know the following default settings. Web Interface (Username and Password) Username: admin Password: admin The default username and password are “admin” and “admin” respectively. If you ever forget the password to log in, you may press the RESET button up to 6 seconds to restore the factory default settings. Attention Attention LAN Device IP Settings IP Ad
