Summary of the content on the page No. 1
OWNER’S MANUAL
Mouse Scanner
LSM-100
Disassembling the mouse may cause malfunction to the product. Do not disassemble
the mouse. LG Electronics is not responsible for problems caused by disassembling the
product by users or non-authorized personnel.
This product combines the features of a scanner and a mouse to enhance the mobility
and convenience. It can be used either as a scanner or a mouse.
Please read the safety information carefully before using the product.
MAX62089303 / QM2F16HMA
Summary of the content on the page No. 2
Before Using 2 Before Using Safety Precautions There are two types of precautions: “Warning” and “Caution”. 1 Warning : Failure to observe these instructions may result in serious injury or death. > : Failure to observe these instructions may result in minor injury or damage to the product. Caution > : Following the tips can prevent malfunction or damage to the product. Tip : This symbol indicates a prohibited use of the product. & - After reading this manual, make sure to keep it in a pla
Summary of the content on the page No. 3
Before Using Before Using 3 Caution > Do not install the product in an extremely hot Do not install the device in an area prone to 1 (over 35 °C) or cold (under 5 °C) area, or with static electricity or excessive heat. high temperature variation. Otherwise, this may cause Otherwise, this may cause malfunction or damage to malfunction or damage to the product. the product. Do not install the product in a humid or Do not disassemble, modify or repair the dusty area. product. Otherwise,
Summary of the content on the page No. 4
4 Contents Contents 1 Before Using 2 Safety Precautions 5 Product Components 5 - Components and Parts 2 6 Introduction Installation 7 Installing the Mouse Scanner Program 3 7 - System Requirements 8 - How to Install Using the Product 9 Using the Mouse Scanner Program 11 - Using the Scanner 12 - Exclusive Features of the Mouse Scanner 13 - Edit 14 - Paste Image / Paste Text / Share 15 - Save / Print / Edit / Settings 18 - System Menu (S-logo) 19 - How to Add Your Social Networking Accounts : Fl
Summary of the content on the page No. 5
Before Using Before Using 5 Product Components Components and Parts 1 1. Mouse Scanner 2. Quick Guide 3. CD 4. Pouch 5. Mouse Pad 6. Cleaner (Composite Fiber) How to use the mouse pad Tip After purchasing the product, make sure that all of the following components are included in the package. If any components are missing or damaged, contact the retail store you purchased the product immediately. to improve the performance of the product. Caution > The mouse pad has a transparent surface,
Summary of the content on the page No. 6
Before Using 6 Before Using Introduction 1 Name a b c d h i e g j f a Right button f Back button Allows you to go back while browsing the b Wheel Internet or folders. c Indicator g Laser Sensor The blue LED blinks while scanning in progress. h Scan Window d Left button i Label e Scan start/stop button j Scan Window Film please remove it Caution > Touch the scan window with sharp objects or using the scanner on a rough surface may cause damage to the scan window. If the scan window is
Summary of the content on the page No. 7
Installation Installation 7 Installing the Mouse Scanner Program System Requirements Intel® Core™ Duo 1.2 GHz or Intel® Core™ 2 Duo or CPU AMD Athlon™ II processor AMD Athlon™ 64 X2, 1.7 GHz 2 RAM 4 GB 1GB Free of Ram 128 MB NVIDIA® GeForce® 8400 512 MB AMD Radeon™ HD External graphics card 4850 or 512 MB ATI FirePro™ GS or 128 MB ATI Radeon™ X1300 V5700 or better 384 MB (shared) Intel® GMA Built-in graphics card X3000 or better OpenGL version 1.5 or later 2.0 or later Free space 4 GB 1 GB O
Summary of the content on the page No. 8
Installation 8 Installation How to Install Please read the owner’s manual before installing the Smart Scan installer program. When you insert the CD you will see 3 icons which are installation of the program, Manual link and ad movie clip. We recommand to read the manual before installation. 1. Connect the mouse scanner to the USB port. Wait until the installation of the driver is complete. Do not remove the mouse scanner during the installation. If you removed the mouse scanner, connect it to
Summary of the content on the page No. 9
Using the Product Using the Product 9 Using the Mouse Scanner Program a g j 3 g b cd e f h i Optical character recognition (OCR): A feature used to recognize the text from the scanned image, which allows you to edit or modify the text. such as Outlook. Caution > To use the OCR function, scan a document or photo in high-resolution. Go to > to check the resolution. The OCR function supports Over the sizes of 10 font in high resolution. If it fails to recognize the text, check whether the
Summary of the content on the page No. 10
Using the Product 10 Using the Product Check for updates: Check the update status. Send feedback: Send comments if a problem occurs while using the software. Help: View the owner’s manual. About: Check the program information. 2. Paste Image: Paste the scanned image to a compatible program. 3. Paste Text: Paste the optically recognized text to a compatible program. 4. Share: Upload the scanned image to Flickr, Twitter, Facebook, or attach the image to an e-mail message. Caution > your acc
Summary of the content on the page No. 11
Using the Product Using the Product 11 Using the Scanner Remaining available memory Function display description / mouse wheel, stop scan Scan image Scan window 3 1. Place the mouse scanner on the desired document or photo, then press the Scan button on the side. 2. Once the scan starts, the screen turns black and the image where the mouse is positioned is displayed. 3. Move the mouse scanner to scan the desired area of the document. A green scan window indicates that you can scan faster
Summary of the content on the page No. 12
Using the Product 12 Using the Product Caution > If the document or photo moves with the mouse scanner, the scanner may be unable to calibrate the image. The mouse pointer will not work on a glass. Put a sheet of paper on top of the glass surface. Scanning the following documents may damage the documents or produce unwanted results. Wrinkled or creased documents, curled documents, torn documents, documents with paper clips or staples, carbon paper, coated paper, extremely thin and tran
Summary of the content on the page No. 13
Using the Product Using the Product 13 Tip How to quit the software. - If you want to quit the software please go to tray which is bottom and right side of Window O/S. Then move the cursor on the icon and click the right button of the mouse. You will find out the quit button on it. Please press quit button to quit the software. Edit Adjust the background 3 Rotate Adjust the color Scanned Adjust the image background 1. When scanning is complete, the scanned image is automatically cut
Summary of the content on the page No. 14
Using the Product 14 Using the Product Paste Image / Paste Text / Share 3 1. Using the Paste Image / Paste Text features To paste an image or text after scanning is complete, start the compatible application you want. Then, press Paste Image or Paste Text to copy and paste the scanned image/text to the compatible application. 2. Using the Share feature are asked to authenticate your account as described later in this document. Once the authentication is complete, you can use these services
Summary of the content on the page No. 15
Using the Product Using the Product 15 Save / Print / Edit / Settings 3 4. Save (click to insert the image) Click the icon to open the folder to save the scanned image/text. Select the desired location, set the To save to a new folder, click the mouse scanner’s right button and select , or click the icon at the top of the window to create a new folder. Rename the new folder and click to save it. - If you scan a document containing both an image and text, the image will not be inser
Summary of the content on the page No. 16
Using the Product 16 Using the Product 5. Print Click the icon to open the print dialog box of the operating system. Select the desired printer, then click the button. 3 6. Edit If the edited image is not what you wanted, you can double-click the icon or the preview window to edit again with the functions described above. 7. Settings 1) General: General options User interface language Scan resolution: 320dpi, Middle : 200 dpi, Low : 100 dpi (can be modified in the Settings) *The resoluti
Summary of the content on the page No. 17
Using the Product Using the Product 17 5) Advanced: Advanced options Maximum scan memory: You can increase or decrease the memory previously set according to the current system. Increasing the memory will result to a higher available memory, thus a larger scan area. The maximum value corresponds to the maximum capacity of the memory available in the system. (The value may differ depending on the system.) The default value is Dynamic which is define with own's computer condition automatic
Summary of the content on the page No. 18
Using the Product 18 Using the Product System Menu (S-logo) 3 1. Manage extensions: Manage application programs to add convenience to the scan software. You can view, add, or remove the settings for your e-mail, Facebook, Flickr and Twitter. Tip If you want to sign out Twitter, Facebook or Flickr and use another application, click the desired application to display the button at the bottom right of the window. Click the button to log out from the account. 2. Check for updates: If you wi
Summary of the content on the page No. 19
Using the Product Using the Product 19 How to Add Your Social Networking Accounts social networking account. (The authentication needs to be done only once. Next time you access the social networking service, a scanned image will be automatically uploaded to the added account.) 1. Authenticating your Twitter, Flickr or Facebook account account information as illustrated below. Enter your information, select the check box, then click Login. Caution > If you are using a shared computer, do not
Summary of the content on the page No. 20
Using the Product 20 Using the Product 2. Using the e-mail Tip 3 You can select one of the e-mail applications available in your system. Outlook is selected by default. 1. Click the scan button once to 2. Simply wipe over the paper 3. start scanning with Smart Scan to scan what you need 1) Lift-off left side to make right side as flat as possible 2) Start at the inner part and move down 3) Scan in smooth waves starting from bottom to top 4) To scan the corner of the book, you should
