Summary of the content on the page No. 1
RV-NB1[B]ff.book Page 1 Thursday, August 19, 2004 6:31 PM
POWERED WOOFER CD SYSTEM
RV-NB1
GROUP DOWN
INSTRUCTIONS
LVT1265-003B
[B]
Summary of the content on the page No. 2
RV-NB1[B]f.book Page 1 Friday, July 16, 2004 5:42 PM Warnings, Cautions and Others IMPORTANT FOR LASER PRODUCTS IMPORTANT for the U.K. 1. CLASS 1 LASER PRODUCT DO NOT cut off the mains plug from this equipment. If the plug 2. CAUTION: Do not open the top cover. There are no user fitted is not suitable for the power points in your home or the cable serviceable parts inside the unit; leave all servicing to qualified is too short to reach a power point, then obtain an appropriate service pe
Summary of the content on the page No. 3
RV-NB1[B]f.book Page 2 Friday, July 16, 2004 5:42 PM SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. Do read the operating instructions before you attempt to use the equipment. Do ensure that all electrical connections (including the mains plug, extension leads
Summary of the content on the page No. 4
RV-NB1[B]f.book Page 1 Friday, July 16, 2004 5:42 PM Thank you for purchasing the JVC Powered Woofer CD System. Before operating this system, read this manual carefully and thoroughly to obtain the best possible performance from your system, and retain this manual for future reference. Features Here are some of the things that make your system both powerful and simple to use. General • With JVC’s COMPU PLAY you can turn on the system and automatically start the radio, disc player, or cass
Summary of the content on the page No. 5
RV-NB1[B]f.book Page 2 Friday, July 16, 2004 5:42 PM Index of parts and controls Display window o ; a s df g h j k l /zxc 1 2 34 5 6 7 8 ON/ STANDBY AUX SOUND BAND CD TAPE TUNER PRESET ONE TOUCH ACTIVE TUNING REC CLEAR SOUND MULTI CONTROL ACS BEAT CUT ON LEVEL STANDBY REW STOP FF 9w p q e rty u i See pages in parentheses for details. Display window o REC indicator (18) 1 Shoulder strap hooks (4) ; Timer indicators (18) 2 ON/STANDBY button (7) • (timer), ON, OFF 3 AUX button (3, 16) a SLEEP
Summary of the content on the page No. 6
RV-NB1[B]f.book Page 3 Friday, July 16, 2004 5:42 PM Remote control See pages in parentheses for details. 1 Number buttons (9, 11) 2 SLEEP button (17) 3 Multi control buttons (9 – 15, 17 – 18) ON/STANDBY • GROUP UP, GROUP DOWN 1 2 3 • 4, 7, ¢ DISPLAY 4 Source buttons (3, 9 – 16) 4 5 6 CANCEL • AUX, CD 6, TAPE 2 3, TUNER BAND 7 8 9 Pressing one of these buttons also turns on the unit. SET 5 PLAY MODE button (12) 10 100 10 GROUP UP 6 REPEAT button (12) SLEEP CLOCK/TIMER 7 SOUND button (8) 8 A
Summary of the content on the page No. 7
RV-NB1[B]f.book Page 4 Friday, July 16, 2004 5:42 PM Getting started Accessories Check that you have all the following items, which are supplied with the system. Power cord (1) Remote control (1) Batteries—R6(SUM-3)/AA(15F) (2) Shoulder strap (1) If any of these items are missing, contact your dealer immediately. Carrying the system Using the carrying handles Using the shoulder strap Be sure to hold both handles when you carry the system. Attach the supplied shoulder strap (adjustable
Summary of the content on the page No. 8
RV-NB1[B]f.book Page 5 Friday, July 16, 2004 5:42 PM Connections CAUTION: Make all connection before plugging the system into an AC power outlet. Connecting the auxiliary equipment Pin-plug x 2 Auxiliary equipment Stereo mini plug Signal cord (not supplied) Connecting the microphone/guitar (not supplied) (not supplied) Connecting to the car battery Memory backup batteries 1 2 To car’s cigarette lighter socket (DC12V) Car adapter (not supplied) Battery cover 1 CAUTION: • Be sure to
Summary of the content on the page No. 9
RV-NB1[B]ff.book Page 6 Thursday, August 19, 2004 6:31 PM • • PHONES jack 12V DC IN AC IN To remove the batteries, remove battery To remove the batteries, remove battery Operating the system on “10” first. “3” first. batteries Notes: Notes: • When you operate the system on mains • The memory backup batteries will not be 1 (AC) power or on car battery (DC12V), the consumed as long as the power is supplied power source automatically switches from from an AC outlet, loaded 10 batteri
Summary of the content on the page No. 10
RV-NB1[B]ff.book Page 7 Thursday, August 19, 2004 6:31 PM Basic operations ON/STANDBY SUPER WOOFER DISPLAY VOLUME +/– VOLUME +/– SOUND ON/STANDBY STANDBY indicator SUPER WOOFER SOUND VOLUME +/– ACTIVE CLEAR ACS ON/LEVEL ACS SOUND indicator VOLUME +/– Turning off the system Turning the power on and off Press ON/STANDBY again. Note: The lighting condition for the STANDBY indicator and the The STANDBY indicator lights up when the system is operated on display differs depending on the p
Summary of the content on the page No. 11
RV-NB1[B]f.book Page 8 Friday, July 16, 2004 5:42 PM Adjusting the super woofer Selecting the sound mode volume Sound modes can be selected to enhance the type of music being played. During play, you can adjust the bass level between BASS 1 Press SOUND to select the sound mode. (minimum) and BASS 6 (maximum). Each time you press the button, the sound mode changes as follows: Using the system Turn the SUPER WOOFER VOLUME +/– control clockwise to increase the bass level or turn it counterc
Summary of the content on the page No. 12
RV-NB1[B]f.book Page 9 Friday, July 16, 2004 5:42 PM Listening to radio Number buttons SET 4 ¢ TUNER BAND TUNER BAND PRESET TUNING FM MODE 4 ¢ You can listen to FM and AM (MW/LW) stations. Stations can be tuned in manually, automatically, or from preset memory storage. Before listening to the radio, fully extend the FM telescopic antenna. Tuning in to a station Notice: To adjust the reception condition 1. Press TUNER BAND. For FM: Adjust the FM telescopic antenna’s length, angle and T
Summary of the content on the page No. 13
Hierarchy RV-NB1[B]f.book Page 10 Friday, July 16, 2004 5:42 PM Presetting stations You can preset up to 30 FM stations and 15 AM (MW/LW) 4. Press the number buttons to select the stations. preset number you want. Note: Preset numbers may have been set to factory test 5. Press SET. frequencies prior to shipment. This is not a malfunction. “STORED” appears on the display and the station is stored. You can preset the stations you want into memory by following one of the presetting met
Summary of the content on the page No. 14
RV-NB1[B]f.book Page 11 Friday, July 16, 2004 5:42 PM Skip Play Using the disc player—Normal During playback, press 4 or ¢ to select the track you want to Play play. •Press ¢ once to skip to the beginning of the next track. To play a disc •Press 4 to skip to the beginning of the track being played. 1. Set a disc. Press 4 twice quickly to skip to the beginning of the previous track. 2. Press CD 6. You can also select a track in stop mode with the same buttons. The first track of the d
Summary of the content on the page No. 15
RV-NB1[B]f.book Page 12 Friday, July 16, 2004 5:42 PM Programming the playing order Random play of the tracks The tracks will play in no special order when you use this mode. Using the remote control Using the remote control You can program up to 50 tracks in any desired order including 1. Set a disc. the same tracks. You can only make a program when the system is stopped. 2. Press CD 6. While making a program, you cannot specify a group number to 3. Press 7 to stop the disc. se
Summary of the content on the page No. 16
RV-NB1[B]f.book Page 13 Friday, July 16, 2004 5:42 PM Playing back tapes TAPE 2 3 7 4 ¢ TAPE 2 3 ¢ REVERSE MODE LOCK/RELEASE knob 4 7 With automatic tape direction, you can listen to type I or II tapes 5. If you need to change the playback without having to change any settings. direction, press TAPE 2 3. The opposite side tape direction indicator lights up and the tape The use of tapes longer than 120 minutes is not recommended, playback direction changes. since characteristic det
Summary of the content on the page No. 17
RV-NB1[B]f.book Page 14 Friday, July 16, 2004 5:42 PM Recording TAPE 2 3 CD 6 7 AUX CD 6 TAPE 2 3 TUNER AUX TUNER REVERSE PRESET TUNING/ MODE BEAT CUT 7 ONE TOUCH REC Things to know before you start Standard recording recording You can record any sound source to tape. It should be noted that it may be unlawful to re-record The sources are disc, tuner, auxiliary equipment, microphone, and pre-recorded tapes, records, or discs without the guitar. The microphone sound and guitar sound
Summary of the content on the page No. 18
RV-NB1[B]f.book Page 15 Friday, July 16, 2004 5:42 PM 4. Press ONE TOUCH REC on the system. 6. Choose whether to have pauses between tracks. The indicator lights up and the system starts recording. • If nothing is done, a non-recorded pause of about four • If the tab of the cassette tape is removed to protect erasure or seconds will be automatically made between tracks. recording, recording does not start. • If you do not want pauses between tracks, press CD 6 Tips: When you want to
Summary of the content on the page No. 19
RV-NB1[B]f.book Page 16 Friday, July 16, 2004 5:42 PM Listening to an auxiliary equipment AUX AUX Listening to external equipment You can listen to an auxiliary equipment. 3. Adjust the volume to the desired listening • First make sure that the auxiliary equipment is properly level. connected to the system. (See page 5.) 4. Apply sound effects, if you wish. 1. Set the volume level to minimum. Adjust the super woofer volume to reinforce the bass sound. 2. Press AUX. Note: For oper
Summary of the content on the page No. 20
RV-NB1[B]f.book Page 17 Friday, July 16, 2004 5:42 PM Using the timer Setting the sleep timer ON/STANDBY Use the sleep timer to turn the system off after a certain number of CANCEL minutes when it is playing. By setting the sleep timer, you can fall SET SLEEP asleep to the music and know that your system will turn off by CLOCK/TIMER itself rather than playing all night. 4 ¢ You can set the sleep timer only when the system is turned on. Using the remote control only 1. Press SLEEP.
