Casio LK-270 user manual

User manual for the device Casio LK-270

Device: Casio LK-270
Category: Music Mixer
Manufacturer: Casio
Size: 0.35 MB
Added : 3/27/2013
Number of pages: 46
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Casio LK-270. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Casio LK-270.

For your convenience

If looking through the Casio LK-270 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Casio LK-270 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Casio LK-270 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Casio LK-270 User manual - Online PDF
Advertisement
« Page 1 of 46 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Casio LK-270 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Casio LK-270. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

CTK-4000/CTK-5000/LK-270/LK-205/WK-200/WK-500/CDP-200R
MIDI Implementation
CASIO COMPUTER CO., LTD.
Contents
Part I MIDI Message Overview
1 Product Configuration as a MIDI Device.......................................................................................... 5
1.1 System Section.................................................................................................................................... 5
1.2 Performance Controller Section ........................................

Summary of the content on the page No. 2

9.13 RPN (64H,65H) ................................................................................................................................. 13 9.13.1 Pitch Bend Sensitivity ..........................................................................................................................14 9.13.2 Fine Tune..............................................................................................................................................14 9.13.3 Coarse Tune..............

Summary of the content on the page No. 3

19.3 Format of Each Field ......................................................................................................................... 25 19.3.1 SX : System Exclusive Message Status ...............................................................................................25 19.3.2 MAN : Manufacturer's ID ....................................................................................................................25 19.3.3 MOD : Model ID....................................

Summary of the content on the page No. 4

31 All Data Parameter ........................................................................................................................ 42 Part VI Parameter Set List 32 Parameter Set Table...................................................................................................................... 43 Part VII Setting Values and Send/Receive Values 33 Setting Value Tables..............................................................................................................

Summary of the content on the page No. 5

Part I MIDI Message Overview 1 Product Configuration as a MIDI Device In terms of a MIDI device, this Instrument consists of a System Section, Performance Controller Section, and Sound Generator Section. Each of these sections can send and receive specific MIDI Messages in accordance with its function. 1.1 System Section The System Section manages the Instrument status and user data. A communication method known as a "bulk dump" is supported, which allows two-way transfer of user data between

Summary of the content on the page No. 6

1.3.2 Instrument Part Block The instrument parts of the sound generator can be operated or their settings can be changed with Instrument-specific system exclusive messages and channel messages. The 32 instrument parts of this Instrument are divided between Group A and Group B, each of which has 16 instrument parts. Only Group B can be controlled by external channel messages. As shown in the following table, there is a fixed relationship between channel message receive channel numbers and inst

Summary of the content on the page No. 7

2 Timbre Type Specific Operation The sound source operation performed for a received message depends on the current Timbre Type value (see "11.1 About the Timbre Type), which is the operation mode of each sound generator instrument part. For details, see the explanation for each message. 3 Conditions that Disable Message Send and Receive All MIDI message send and receive is temporarily disabled while any one of the following processes is in progress.  SD memory card operation in progress App

Summary of the content on the page No. 8

Part II Channel Message 4 Receive Channel The channel number of the channel message received by each part is shown in the table under "1.3.2 Instrument Part Block". 5 Send Channel Basically, the MIDI channel of the channel message sent when the Instrument is played coincides with the MIDI channel of the part being played. Note, however, that the MIDI channel of the performance information that corresponds to the keyboard main part is the Keyboard Channel setting value. 6 Note Off Format Messa

Summary of the content on the page No. 9

8 Polyphonic Key Pressure Format Message Format: AnH kkH vvH n: MIDI Channel Number kk: Key Number vv: Pressure Value Send This message is not sent by this Instrument. Receive This message is not received by this Instrument. 9 Control Change Format Message Format: BnH ccH vvH n: MIDI Channel Number cc: Control Number vv: Value Send Sent when the Instrument's pedal is operated or when Instrument settings are changed. Receive Receipt changes the pedal and other performance conditions, and Instrume

Summary of the content on the page No. 10

9.2 Modulation (01H) Format Message Format: BnH 01H vvH n: MIDI Channel Number vv: Value Send This message is not sent by this Instrument. Receive Receipt adds, to the tone being sounded, modulation of a depth specified by the value. In the case of a tone that already has modulation applied, receipt of this message increases the modulation depth. The modulation effect differs according to the tone being used. 9.3 Data Entry (06H,26H) Format Message Format: BnH 06H mmH (MSB) BnH 26H llH (LSB) n

Summary of the content on the page No. 11

9.5 Pan (0AH) Format Message Format: BnH 0AH vvH n: MIDI Channel Number vv: Value (Note1) Note 1: For information about the relationship between setting values and send/receive values, see "33.3 Pan Setting Value Table" in "Part VII Setting Values and Send/Receive Values". Send Sent when auto accompaniment is used. Receive Receipt changes the pan setting of the corresponding part. 9.6 Expression (0BH) Format Message Format: BnH 0BH vvH n: MIDI Channel Number vv: Value Send Sent when auto accomp

Summary of the content on the page No. 12

Timbre Type Specific Operation This operation differs in accordance with the Timbre Type (see "11.1 About the Timbre Type") setting.  Timbre Type: Melody Sustain off/on control is performed in accordance with the value of the received message.  Timbre Type: Drum The received message does not affect sound source operation. 9.8 Sostenuto (42H) Format Message Format: BnH 42H vvH n: MIDI Channel Number vv: Value (Note1) Note 1: For information about the relationship between setting values and se

Summary of the content on the page No. 13

Send Sent when auto accompaniment is used. Receive Changes Reverb Send. 9.11 Chorus Send (5DH) Format Message Format: BnH 5DH vvH n: MIDI Channel Number vv: Value (Note1) Note 1: The setting value matches the value that is sent and received. Send Sent when auto accompaniment is used and when a Chorus on/off operation is performed. Receive Changes Chorus Send. 9.12 NRPN (62H,63H) Format Message Format: BnH 62H llH (LSB) BnH 63H mmH (MSB) n: MIDI Channel Number ll: LSB Value mm: MSB Value Send Thi

Summary of the content on the page No. 14

9.13.1 Pitch Bend Sensitivity Format Message Format: BnH 64H 00H BnH 65H 00H BnH 06H mmH BnH 26H llH n: MIDI Channel Number mm: MSB Value 0 - 12 ll: LSB Value Send 00H Receive Ignored Send Sent when the Bend Range is changed on the CTK-5000, WK-500, or CDP-200R. Receive Receipt changes Bend Range. 9.13.2 Fine Tune Format Message Format: BnH 64H 01H BnH 65H 00H BnH 06H mmH BnH 26H llH n: MIDI Channel Number mm: MSB Value ll: LSB Value Send This message is not sent by this Instrument. Receive R

Summary of the content on the page No. 15

Send This message is not sent by this Instrument. Receive Receipt changes Channel Coarse Tune. Does not affect sound source operation when the Timbre Type is Drum. 9.13.4 Null Format Message Format: BnH 64H 7FH BnH 65H 7FH n: MIDI Channel Number Send Sent after the Bend Range is changed on the CTK-5000, WK-500, or CDP-200R. Receive Receipt deselects RPN. 9.14 All Sound Off (78H) Format Message Format: BnH 78H 00H n: MIDI Channel Number Send Sent when Local is set to OFF on the Instrument. Receiv

Summary of the content on the page No. 16

10 Mode Message 10.1 All Notes Off (7BH) Format Message Format: BnH 7BH 00H n: MIDI Channel Number Send Sent when MIDI send related settings are changed on the Instrument, or when auto play is stopped, etc. Receive Receipt of any of this message releases the currently sounding voice (same as releasing the keyboard key). 10.2 Omni Off (7CH) Format Message Format: BnH 7CH 00H n: MIDI Channel Number Send This message is never sent. Receive Receipt of this message performs the same operation as when

Summary of the content on the page No. 17

10.5 Poly (7FH) Format Message Format: BnH 7FH 00H n: MIDI Channel Number Send This message is never sent. Receive Receipt of this message performs the same operation as when All Notes Off is received. 11 Program Change Format Message Format: CnH ppH n: MIDI Channel Number pp: Program Number (Note1) Note 1: For details about the relationship between the program number and the tone, see the Tone List that comes with the Instrument. Send Sent when a tone is selected. Receive Receipt of this messag

Summary of the content on the page No. 18

12 Channel Aftertouch Format Message Format: DnH vvH n: MIDI Channel Number vv: Value Send These messages are never sent. Receive Receipt of this message adds modulation to the voice that is sounding. The modulation effect differs according to the tone being used. 13 Pitch Bend Format Message Format: EnH llH mmH n: MIDI Channel Number ll: Value LSB mm: Value MSB Send Sent when a pitch bender operation is performed on the CTK-5000, WK-500, or CDP-200R. Receive Receipt changes the pitch of the cu

Summary of the content on the page No. 19

Part III System Messages 14 Timing Clock Format Message Format: F8H Send Sent when auto accompaniment is used. Receive This message is not received by this Instrument. 15 Start Format Message Format: FAH Send Sent when auto accompaniment is used. Receive This message is not received by this Instrument. 16 Stop Format Message Format: FCH Send Sent when auto accompaniment is used. Receive This message is not received by this Instrument. 17 Active Sensing Format Message Format: FEH Send This messag

Summary of the content on the page No. 20

Receive Once this message is received, the Active Sensing mode is entered. If no MIDI message is received for a specified amount of time, voices being sounded by the Instrument's sound source are released, the controller is reset, and the Active Sensing mode is exited. 18 System Exclusive Message Format Message Format: F0H....F7H The Instrument sends and receives standard universal system exclusive messages, and system exclusive messages that have Instrument-specific formats. 18.1 Universal R


Alternative user manuals
# User manual Category Download
1 Casio LK-270 User manual Electronic Keyboard 449
2 Casio CDP-200R User manual Music Mixer 0
3 Casio LK-205 User manual Music Mixer 1
4 Casio WK-500 User manual Music Mixer 2
5 Casio CTK-5000 User manual Music Mixer 10
6 Casio WK-200 User manual Music Mixer 4
7 Casio LK-270 Guide Uncategorized 0
8 Sony 2-190-733-11 (1) User manual Music Mixer 1
9 Sony DMBK-R103 User manual Music Mixer 6
10 Sony DMBK-R106 User manual Music Mixer 1
11 Sony RS-232C User manual Music Mixer 1
12 Sony DMBK-R105 User manual Music Mixer 1
13 Sony DMBK-R109 User manual Music Mixer 3
14 Sony DMBK-R102 User manual Music Mixer 0
15 Sony OXF-R3 User manual Music Mixer 38