Summary of the content on the page No. 1
EKI-2525P
5-port Industrial PoE Unmanaged
Ethernet Switch
User Manual
Summary of the content on the page No. 2
Copyright The documentation and the software included with this product are copyrighted 2007 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accu
Summary of the content on the page No. 3
Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty a
Summary of the content on the page No. 4
Declaration of Conformity CE This product has passed the CE test for environmental specifications. Test conditions for passing included the equipment being operated within an industrial enclosure. In order to protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we strongly recommend the use of CE-compliant industrial enclosure products. FCC Class A This equipment has been tested and found to comply with the limits for a Class A digital device
Summary of the content on the page No. 5
Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User's Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation. Dropping it or let
Summary of the content on the page No. 6
Safety Precaution - Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage. 1. To avoid electrical shock, always disconnect the power from your PC chassis before you work on it. Don't touch any components on the CPU card or other cards while the PC is on. 2. Disconnect power before making any configuration changes. The sudden rush of power as you connect a jumper or install a card may damage sensitive electronic components. EKI-25
Summary of the content on the page No. 7
Contents Chapter 1 Overview...........................................2 1.1 Introduction.........................................................2 1.1.1 High-Speed Transmissions .......................2 1.1.2 Power-over-Ethernet (PoE) .......................2 1.1.3 Dual Power Input.......................................2 1.1.4 Flexible Mounting ......................................2 1.1.5 Advanced Protection .................................2 1.1.6 Wide Operating Temperature ...........
Summary of the content on the page No. 8
EKI-2525P_Manual_ed1 viii
Summary of the content on the page No. 9
Overview Sections include: Introduction Features Specifications Packing List Safety Precaution 1 Chapter1 CHAPTER
Summary of the content on the page No. 10
Chapter 1 Overview 1.1 Introduction The EKI-2525P is a cost-effective solution and meets the high reliability requirements demanded by industrial applications. Using fiber port can extend the connection distance that increases the network elasticity and performance. Besides, the industrial switch provides the PoE function for kinds of Powered Devices to receive power as well as data over the RJ-45. 1.1.1 High-Speed Transmissions The EKI-2525P includes a switch controller that c
Summary of the content on the page No. 11
1.2 Features • Provides 5 x 10/100Base-TX Ethernet ports with 4 PoE injectors of RJ-45 connector • Supports full/half duplex flow control • Supports store and forward transmission • Supports auto-negotiation • Supports MDI/MDI-X auto crossover • Provides surge protection (EFT) 3,000 V for power line DC • Supports 4,000 V ESD protection for Ethernet DC • Supports 48 V power input DC • Provides flexible mounting: DIN-rail, Wall Mounting • Supports operating temperature from -10 ~ 60
Summary of the content on the page No. 12
1.3 Specification Communications IEEE 802.3, 802.3u, 802.3x, 802.3af Compatibility 10/100Base-TX LAN Up to 100 m Transmission Distance Up to 100 Mbps Transmission Speed Interface 5 x RJ-45 Connectors 6-pin removable screw terminal (power & relay) Unit: P1, P2, P-Fail LED Indicators TX port: Link/Active, Duplex/Collision Power 57 Watts (Full load with PoE) Power Consumption 2 x Unregulated 48 V DC Power Input 1 Relay Output Fault Output
Summary of the content on the page No. 13
Certifications UL, 60950-1, CAN/CSA-C22.2 No.60950 Safety U.S.A.: FCC Part 15 CISPR 22 EMC EU: EN55011, EN61000-6-4 EN55022, Class A, EN61000-3-2/3 EN55024 IEC61000-4-2/3/4/5/6/8/11/12 EN61000-6-2/4 IEC60068-2-32 Free Fall IEC60068-2-27 Shock IEC60068-2-6 Vibration 5 Chapter1
Summary of the content on the page No. 14
1.4 Packing List • 1 x EKI-2525P Industrial Ethernet Switch • 1 x eAutomation Industrial Communication CD-ROM with software, and User manual • 2 x Wall Mounting Bracket and Screws • 1 x DIN-rail Mounting Bracket and Screws • 1 x EKI-2525P Startup Manual • 1 x DC Jack Cable 2.0/150mm 1.5 Safety Precaution Attention IF DC voltage is supplied by an external circuit, please use a protection device on the power supply input. EKI-2525P_Manual_ed1
Summary of the content on the page No. 15
Installation Sections include: LED Indicators Dimensions Mounting Network Connection Power Connection 7 Chapter2 CHAPTER
Summary of the content on the page No. 16
Chapter 2 Installation In this chapter, you will be given an overview of the EKI-2525P hardware installation procedures. 2.1 LED Indicators There are few LEDs display the power status and network status located on the front panel of EKI-2525P, each of them has its own specific meaning as the table below. Table 2.1: EKI-2525P LED Definition LED Color Description On Power input 1 is active P1 Green Off Power input 1 is inactive On Power input 2 is active P2 Green Off Po
Summary of the content on the page No. 17
2.2 Dimensions (units: mm) Figure 2.1: Front View of EKI-2525P 9 Chapter2
Summary of the content on the page No. 18
Figure 2.2: Side View of EKI-2525P EKI-2525P_Manual_ed1 10
Summary of the content on the page No. 19
Figure 2.3: Rear View of EKI-2525P 11 Chapter2
Summary of the content on the page No. 20
Please refer to page 16 for pin assignment. Figure 2.4: Top View of EKI-2525P EKI-2525P_Manual_ed1 12
