Allied Telesis AT-CM2K0S user manual

Summary of the content on the page No. 1

1 2 3 4
1 2 3 4
T
X
T
X
SFP
SFP
AT-CM2K0S
AT-CM2K0S
LK AT
LK AT
LK AT FD 1000M
LK AT FD 1000M
10/100/1000
RDY
10/100/1000
RDY
SML ML OAM 100M
SML ML OAM 100M
Twisted Pair Port
LED Descriptions
*613-000332 Rev D*
The 10/100/1000Base-TX compliant twisted pair port has an RJ-45 connector and a
Status LEDs
613-000332 Rev. D
maximum operating distance of 100 meters (328 feet). Category 5 (5E), 100 Ohm
The line card has four status LEDs as described in the following tab

Summary of the content on the page No. 2

LED State Description Off The port is not operating at 100 Mbps.* * When the 1000M and 100M LEDs are both off, the port is operating at 10 Mbps. DIP Switch Settings Electrical Safety and Emissions Statements The DIP switches as described in the following table allow you to set the operating mode This product meets the following standards when installed in compliant host equipment. of the line card. For information about the operating modes as well as Smart MissingLink, MissingLink, and OAM, re

Summary of the content on the page No. 3

No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc.