Summary of the content on the page No. 1
Users’ Guide:
WLN1500UG001
Enfora® Wi-Fi® Adapter for
Treo 600/650 Smartphone
Users’ Guide
Revision 1.00
Summary of the content on the page No. 2
Copyright Statement Copyright 2005 by Enfora Inc. All rights reserved. No portion of this document may be copied, photocopied, reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Enfora Inc. © 2005 Enfora, Inc. All rights reserved. Disclaimer Enfora Inc. makes no repre
Summary of the content on the page No. 3
Table of Contents SAFETY INFORMATION FOR WIRELESS HANDHELD DEVICES.................... 1 GENERAL SAFETY INSTRUCTIONS ........................................................................ 3 PACKAGE CONTENTS ................................................................................................. 4 APPEARANCE................................................................................................................. 5 HARDWARE AND SOFTWARE INFORMATION.........................
Summary of the content on the page No. 4
Safety Information for Wireless Handheld Devices The equipment certifications appropriate to your device are marked on the device and product specific information. The use of the equipment is subject to the following conditions: FCC COMPLIANCE STATEMENT This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device mu
Summary of the content on the page No. 5
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY INCORRECT TYPE. DISPOSE OF BATTERIES ACCORDING TO THE INSTRUCTIONS. Use the following or equivalent certified Power Supply. Make: PHIHONG, Model PSA11R-050 Rated Input: 100-240Vac, 0.5A, 50-60hz, DC Output: 5V DC, 2.0A Limited Power Source. WLN1501/WLN1502 Wi-Fi Adapter Page 2 Copyright, 2005 Enfora, Inc.
Summary of the content on the page No. 6
General Safety Instructions • Check if all peripherals are properly connected before turning on any equipment. • Make sure to disconnect the power plug from the power source before installing or removing the Enfora® Wi-Fi® Adapter. • Always hold the product with dry hands. Droplets of water may cause it to short circuit and damage to the product. • Use the product only under a dry environment. Humid places are not appropriate for the product. • DO NOT use the product in a damp
Summary of the content on the page No. 7
Package Contents Check the contents of the package. The following items should be included. If there is any item that is damaged or missing, please contact your dealer immediately. The following contents are included in the WLN1501 – Wi-Fi® Adapter for Treo 600: Description Quantity Enfora® Wi-Fi® Adapter for Treo Smartphone 1 Install CD-ROM 1 AC/DC Power Supply 1 The following contents are included in the WLN1502 – Wi-Fi® Adapter for Treo 650: Description Quantity Enfora
Summary of the content on the page No. 8
Appearance The following images show the Enfora® Wi-Fi® Adapter for the Treo 600/650 Smartphone. Lock Release Button Network/ Battery Status LED Power On/Off Button Treo Smartphone Headphone Jack Lock/Release Button Enfora Wi-Fi Adapter DC Power Input Treo Smartphone Headphone Jack WLN1501/WLN1502 Wi-Fi Adapter Page 5 Copyright, 2005 Enfora, Inc.
Summary of the content on the page No. 9
Hardware and Software Information Battery Operation Prior to using the Enfora® Wi-Fi® Adapter, charge the new battery for a minimum of 2 hours to obtain a full charge. The Enfora® Wi-Fi® Adapter derives its power from a self-contained battery pack to ensure there is no battery drain on the handheld device. The Enfora® Wi-Fi® Adapter will also charge your Treo 600/650 Smartphone if the Treo 600/650 is placed in the Enfora® Wi-Fi® Adapter. Note: The Enfora® Wi-Fi® Adapter WILL
Summary of the content on the page No. 10
Installing the Treo Smartphone into the Enfora® Wi-Fi® Adapter Attach the updated Battery Cover to the Treo 650 These instructions apply only to the Treo 650 Smartphone. If you have the Treo Smartphone 600, please skip these instructions, and proceed to Attach the Enfora® Wi- Fi® Adapter to the Treo 600/650. 1. If you haven’t replaced the Battery Door with the enclosed Battery Door, grasp your Treo 650, and look at the Battery Door on the back of the unit. 2. Press in the elliptical
Summary of the content on the page No. 11
Removing the Enfora® Wi-Fi® Adapter from the Treo 600/650 1. Hold the Enfora® Wi-Fi® Adapter upright. 2. Grasp the edges of the Treo with one hand and grasp the edges of the Enfora® Wi-Fi® Adapter with your other hand. 3. With the index finger of the hand holding the Enfora® Wi-Fi® Adapter, depress the Release Button. 4. Lift the Treo away from the inner surface of the Enfora® Wi-Fi® Adapter about 5º to 10º 5. Gently rock the Treo side to side and lift the Treo from the Enfora® Wi-Fi®
Summary of the content on the page No. 12
Configuring your Enfora® Wi-Fi® Adapter 1. After installing the Enfora® Wi-Fi® Adapter to your Treo, power on the adapter. The power button is located on the lower right front of the Enfora® Wi-Fi® Adapter. 2. Select the Enfora® Wi-Fi® icon from applications on your Treo 600/650 handheld. 3. The first time you use the Enfora® Wi-Fi® Adapter you will need to configure it. If you know your Network Name (SSID) select Add and continue to Step 6. If you do not know the Netwo
Summary of the content on the page No. 13
5. The Network Name you selected will now appear in the Profile Settings window under Network Name (SSID). To create a Profile for this Network Name select add from the menu. The maximum number of profiles you can create is six. Note: Old profiles can be deleted, so new ones can be added. Create Profile Network Name Selected 6. Create a unique name for this profile. The Profile Name should be different than the Network Name. The Network Name that you selected form the Scan
Summary of the content on the page No. 14
7. If you already know your Network Name, create a name for your profile. The Profile Name should be different than the Network Name. Any is the default Network Name. Highlight Any and enter your Network Name. The Network Name is case sensitive and must match the Network Name (SSID) that has been configured on the Access Point/ Wi-Fi® Network you plan to connect to. If your network does not require a Network Name you can leave Any as the Network Name. Profile and Network Name
Summary of the content on the page No. 15
10. If WEP is enabled on your network please contact your network administrator for the correct WEP settings. Hex is the default setting for the network key. If your Access Point uses ASCII select the box in front of ASCII. Select OK to save your settings. Check if your Access Point uses ASCII 11. Select OK from the Profile Settings window to return to the main Manager window. 12. In the Manager window check the status of the Enfora® Wi-Fi® Adapter. When the stat
Summary of the content on the page No. 16
Additional Information Network Information To find out your Network Settings click on the preference button. Then select Network Information. 1. The Network Information available is listed below: WLN1501/WLN1502 Wi-Fi Adapter Page 13 Copyright, 2005 Enfora, Inc.
Summary of the content on the page No. 17
Advanced Configuration Power Save The Enfora® Wi-Fi® Adapter has a Power Save setting. By default the Power Save option is Enabled. To disable Power Save open the Enfora® Wi-Fi® Adapter Manager and select Device Information from the Options menu. From the Device Information window select the drop down box to Enable or Disable the Power Save option. Restore Default settings The Enfora® Wi-Fi® Adapter can be set back to the factory defaults. Any saved Profiles will
Summary of the content on the page No. 18
SOFTWARE LICENSE AGREEMENT This is a legal agreement (“Agreement”) made between you, the original end user, and Enfora, Inc. (“Enfora”), the supplier of the product that you have purchased (“Product”). This Agreement covers all of the software program(s) owned or licensed by Enfora (“Software”) and included or distributed with this Product.* PLEASE CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE USING THIS PRODUCT OR THE SOFTWARE. IF YOU DO NOT AGREE TO ANY OF THESE TERMS AND C
Summary of the content on the page No. 19
ENTIRE AGREEMENT: This Agreement (and the accompanying Limited Warranty) set forth the entire agreement between you and Enfora, supersedes all prior agreements, whether written or oral, with respect to the Software, and may be amended only in a writing signed by both parties. Enfora, Inc. th 661 E. 18 St. Plano, TX 75074 United States of America www.enfora.com * Software program(s) that are included or distributed with this Product, but that are not owned or licensed by Enfora,
Summary of the content on the page No. 20
LIMITED WARRANTY Scope Enfora warrants to the original purchaser of the product that, for a period of ninety (90) days from the date of product purchase, the product hardware, when used in conjunction with any associated software (including any firmware and applications) supplied by Enfora, will be free from defects in material or workmanship under normal operation. Enfora further warrants to such original purchaser that, for a period of ninety (90) days from the date of product purch
