Summary of the content on the page No. 1
HP Accelerated iSCSI for Multifunction
Network Adapters
User Guide
Part Number 410538-00J
December 2007 (Ninth Edition)
Summary of the content on the page No. 2
© Copyright 2006, 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change withoutice t no . The only warranties for HP products and services are set forth in the express warranty statements accompanying such produc ts and services. Nothing herein should be construed as constituting an additional w arranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Confidential computer software. Valid license from HP r
Summary of the content on the page No. 3
Contents Overview.....................................................................................................................................4 iSCSI protocol...........................................................................................................................................4 HP Accelerated iSCSI capability..................................................................................................................4 iSCSI supported operating systems.......
Summary of the content on the page No. 4
Overview iSCSI protocol The HP iSCSI protocol transports block-level storag e requests over TCP connections. Using the iSCSI protocol, systems can connect to remote storage and use it as a physical disk although the remote storage provider or target may actually be providing virtu l physic a al disks. HP Acclerated iSCSI su e pports all targets that are certified and supported by Microsoft iSCSI Software Initiator. HP Multifunction Server Adapters can be enabled as iSCSI devices or virtu
Summary of the content on the page No. 5
Download latest drivers, firmware, and documentation HP updates networking software frequently to includ new fu e nctionality and features. For the latest driver, firmware, and documentation updates go to the HP website (http://h18004.www1.hp.com/products/servers/networking/index.html). Overview 5
Summary of the content on the page No. 6
Configuring an iSCSI device iSCSI configuration through the NCU Complete the steps in the following sections to enabl e and configure an iSCSI device or to view iSCSI information through the NCU. Install the Network Configuration Utility software If you do not have HP NCU software installed on your server, complete the following steps to install the NCU for Windows operating systems: 1. Go to the HP website ( http://www.hp.com). 2. Click Software & Driver Downloads from the left menu
Summary of the content on the page No. 7
2. Select Enable iSCSI Device to enable iSCSI on the multifunction adapter. iSCSI cannot be enabled on the device if the adapter is in an Automat802.3ad Dynamic with ic, Fault Tolerance, or Switch- Assisted Load Balancing with Fault Tolerance (SLB) team. 3. (Optional steps). Type a user-defined MAC address for the iSCSI device in the Locally Administered Address box. The default MAC address is used if an address is not entered. Configuring an iSCSI device 7
Summary of the content on the page No. 8
4. Click iSCSI IP Settings . The iSCSI IP Settings window appears so that you can specify how the IP Address is obtained. 5. On the iSCSI IP Settings window, select one of the following: a. Obtain an IP Address automatically . This is the default. If this opti on is selected, DHCP is used to acquire an IP configuration for the iSCSI device. b. Use the following IP address . This option allows you to specif y the IP configuration for the iSCSI device. The IP address MUST be different fr
Summary of the content on the page No. 9
iSCSI Devices tab The iSCSI Devices tab lists all HP ProLiant Gigabit Ethernet Multifunction server adapters that are iSCSI enabled. A sample iSCSI Devices tab for Windows Server 2003 is shown below. If you upgrade the Network Configuration Utility (NCto version U) 8.20 or later, the following team types are converted to the Transmit Load Balancing (TLB) team type if they include an iSCSI-enabled adapter. • Automatic • 802.3ad Dynamic with Fault Tolerance • Switch-assisted Load Balanc
Summary of the content on the page No. 10
1. Select an HP Multifunction Adapter in the NCU Main window or the iSCSI Devices tab and click VLAN (802.1Q) to display the VLAN tab. Alternatively, hold down the Alt key and enter v to display the VLAN tab. The iSCSI VLAN/QOS (802.1p/Q) window displays the following information: o iSCSI VLAN Id. Shows the identifier value used for the iSCSI VLAN device. o iSCSI VLAN Name. Shows the descriptive name for the VLAN ID. Configuring an iSCSI device 10
Summary of the content on the page No. 11
2. To create an iSCSI VLAN, click Add to open the VLAN Properties dialog box. Only one VLAN can be created per iSCSI device. a. In the VLAN Name box, type a descriptive name. b. Click VLAN Id and select an identifier value. c. Click OK. 3. To modify an existing iSCSI VLAN, select the VLAN Id or Name and click Edit to open the VLAN Properties dialog box. 4. To delete an existing iSCSI VLAN, select the VLAN Id or Name and click Remove. 5. Click OK to save all changes. iSCSI Informa
Summary of the content on the page No. 12
2. Select the Information tab to display the Multifunction Adapter Properties Information window. The Detailed iSCSI Information wi ndow displays the following: • Current MAC Address. The current MAC address for the iSCSI device. • iSCSI Driver Name. The name of the driver for the iSCSI device. • iSCSI Driver Version. The version of the driver for the iSCSI device. • Default Gateway. The default route for the iSCSI device. • Subnet Mask. The subnet mask (dotted decimal) for the iSCSI
Summary of the content on the page No. 13
iSCSI Statistics tab To view the iSCSI statistics for the selected adapter: 1. Select an HP Multifunction Adapter in the NCU Main window and cliProperties ck to display the Multifunction Adapter Properties Setting s tab. Alternatively, hold down the Alt key and enter p to display the Settings tab. 2. Select the Statistics tab. The Multifunction Adapter Properties Statistics tab appears showing activity on the iSCSI device since it was last initialized. The following read-only statisti
Summary of the content on the page No. 14
Acronyms and abbreviations HBA host bus adapter iSCSI Internet Small Computer System Interface RSS Receive-Side Scaling TOE TCP/IP Offload Engine VLAN virtual local-area network Acronyms and abbreviations 14
Summary of the content on the page No. 15
Index D devices tab 9 diagnostics 13 drivers 5 I Information tab 11 installation, NCU 6 IP address assignment 9 iSCSI configuration 6 iSCSI devices 9 iSCSI Information tab 11 iSCSI IP settings window 9 iSCSI Settings tab 4, 6 iSCSI Statistics tab 13 iSCSI VLAN tab 9 N Network Configuration Utility 6 S Settings tab 6 statistics tab, adapter 13 Index 15
