Summary of the content on the page No. 1
IEEE1394A FireWire/Hi-Speed USB2.0
2.5” Hard Drive Data Encrypt Enclosure
PHR-250CE
User’s Manual
Summary of the content on the page No. 2
© Copyright 2005 This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or any means, electronic, mechanical, recording, or oth- erwise, including translation to another language or format, without the prior written permission of Part. The content of this manual is furnished for informational use
Summary of the content on the page No. 3
CONTENTS IMPORTANT: PLEASE READ BEFORE USING ENCRYPT KEYS! 4 INTRODUCING FIREWIRE/USB2.0 HI-SPEED DATA ENCRYPT ENCLOSURE 5 About this Guide 5 System Requirements 5 Registration 5 Products and Services 6 Package Contents 6 Safety Precautions 6 HARDWARE INSTALLATION 8 SECURE KEY 12 SOFTWARE INSTALLATION 13 Software Installation for MAC 13 FireWire Connection for MacOS 13 USB Connection for MacOS 13 Software Installation for PC 14 IEEE1394A FireWire Connection for Windows98SE/ME/2000/XP 14 USB Co
Summary of the content on the page No. 4
IMPORTANT: Please Read Before Using Encrypt Keys! Please read it thoroughly before using PHR-250CE encrypt enclosures, and save this note for future reference use. 1. For security purposes, the encrypt keys cannot be duplicated. Without the matching encrypt key, your data in the hard disk cannot be accessed. Please keep the keys in a safe place. 2. Each encrypt enclosure comes with a unique pair of keys. After using the first key to format the hard drive, we recommend you to try the second key
Summary of the content on the page No. 5
Introducing IEEE1394A FireWire/Hi-Speed USB2.0 2.5" Hard Drive Data Encrypt Enclosure-PHR-250CE Thank you for using the PHR-250CE-Portable IEEE1394A FireWire/Hi- Speed USB2.0 2.5" Hard Drive Enclosure. This is a portable size enclosure which support 2.5” IDE Hard drive. It is simple to install and comes with all the parts you need to create an external IEEE1394A FireWire/ Hi-Speed USB2.0 device. About This Guide Before you begin using the PHR-250CE, be sure to read this manual in its entirety.
Summary of the content on the page No. 6
Package Contents The PHR-250CE-Portable IEEE1394A FireWire/Hi-Speed USB2.0 2.5" Hard Drive Enclosure package includes the following software and documentation: • The software CD contains the drivers and manual •6 pin to 6 pin FireWire Cable • USB2.0 data cable • USB power cable • IEEE1394A FireWire/Hi-Speed USB2.0 2.5" Hard Drive Enclosure •2 x Secure Keys Safety Precautions ON INSTALLATION 1. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. 2. Do n
Summary of the content on the page No. 7
ON TRANSPORTATION Save the packing materials as you may need to repack and transport the unit at a later date. Always remove the disc before moving the unit. ON POWER SOURCES When you are not using the unit for a long time, disconnect the power cord from the unit. To unplug the AC power adapter from the wall outlet, grasp the adapter itself. Do not pull the cord. Warning If any of the following conditions occur, immediately disconnect the power cord from the wall outlet and contact your dealer o
Summary of the content on the page No. 8
Hardware Basic Precaution: 1) Please connect the enclosure directly to your computer. 2) Please make sure your hand is dry and remove static from your body by touching metal parts of your computer chassis. Circuit Board Enclosure Sleeve Bottom Tray Power Back Panel Connector Power On/Off sw Secure Key port USB Data LED cable connector 1394A FireWire Data cable connector Package Content: Enclosure Sleeve 1 USB power cable Circuit Board w/ bottom tray 1 USB Data Cable Back Panel 1 FireWire Dat
Summary of the content on the page No. 9
Hardware Installation 1. Remove the Back Panel from the Enclosure. 2. Use both thumb to push the Bottom Tray out. 3. Align the pins on the hard drive to the 44-pin connector on the Circuit Board, and push the pins all the way in. 9
Summary of the content on the page No. 10
4.(a) Seat the Circuit Board and hard drive to the Bottom Tray. (b) Secure the hard drive with Screws (5mm in diameter) on the bottom of the tray. (a) (b) hard drive & circuit board Bottom Tray 5.Align the Bottom Tray to the Sleeve Slot. Slide and push the hard drive/ Bottom Tray into the Enclosure Sleeve. 6. Put the Back Panel back to the Enclosure. 10
Summary of the content on the page No. 11
7. Secure the Back Panel with 2 screws (3mm in diameter) from each side. 8. Plug in the secure key, connect the Enclosure directly to the computer by using the USB or FireWire cable and it is now ready to use. 11
Summary of the content on the page No. 12
Secure Key Power Back Panel Connector Power On/Off Switch Secure Key Port USB Data cable connector 1394A FireWire Data cable connector Macally Firewire/USB2.0 Data Encrypt enclosure comes with two identical secure keys, which are powered by NIST and CSE certified DES 40-bit encryption engine. Independing to OS, it provides real-time, automatic hardware based bit-by-bit data encryption to entire hard drive including boot sector in the enclosure. With Macally Encrypt enclosures, data security cou
Summary of the content on the page No. 13
Software Installation Software Installation for Mac MacOS Software Installation FireWire Connection for MacOS MacOS will recognize the enclosure automatically, initialize (if the drive is not initialized) and mount the drive to desktop. USB2.0 Connection for MacOS MacOS will recognize the enclosure automatically, initialize (if the drive is not initialized) and mount the drive to desktop. * Plug in the USB2.0 enclosure and it is ready to use. For USB2.0 performance, you must plug the enclosu
Summary of the content on the page No. 14
Software Installation for PC IEEE1394 FireWire Connection for Windows98SE/ME/2000/XP Plug the IEEE 1394 cable into any available port, Windows(98,ME,2000 or XP) will start searching for the proper driver. Please follow the on screen instruction to complete the driver installation. (You may need the Windows CD during the installation.) USB Connection for Windows/ME/2000/XP Plug the USB cable into any available port, Windows(,ME,2000 or XP) will start searching for the proper driver. Please fo
Summary of the content on the page No. 15
Select on the “Specify a location” option and type in “x:\PHR-250CE\DRI- VERS” where “x” is the letter of the CD-ROM drive with the Drivers CD inserted. Then click “Next”. Windows will search the location and find the appropriate driver from the Drivers CD. Click “Next”. The window shown above indicates that the driver installation has been completed. Click “Finish” to end the installation. 15
Summary of the content on the page No. 16
After the installation, you will get USB2.0 Hi-Speed for file transfer, if PHR- 250CE is connected to USB2.0 host adapter; if connected to USB1.1 port in your computer, you will get USB1.1 speed transfer rate. Note: If you don’t see the new drive letter added in My Computer after driver is loaded properly, the reason could be the hard disk has not partition and format yet, please partition and format the drive in the enclosure before using it. IDE Hard Drive Partition and Format procedures: For
Summary of the content on the page No. 17
1. Please run FDISK utility. 2. Follow the screens below to complete the Hard Disk Partition. Step 1 Step 2 17
Summary of the content on the page No. 18
Step 3 Step 4 Step 5 18
Summary of the content on the page No. 19
Step 6 Step 7 Step 8 3. After restart the computer, please verify the new drive in "My Computer". 4. Please do a full format to the hard drive before using it. 19
Summary of the content on the page No. 20
For Windows2000/XP If you can see a new entry under Disk drives of Device Manager, you are ready to partition and format the drive. 1. Open Control panel, “Administrative Tools” and “Computer management”. Step 2 2. Click on “Disk Management”. Step 3 3. “Write Signature and Upgrade Disk Wizard” windows will show up and click “Next”. 20
