NETGEAR ProSafe Wireless Access Point WG102 user manual

User manual for the device NETGEAR ProSafe Wireless Access Point WG102

Device: NETGEAR ProSafe Wireless Access Point WG102
Category: Network Card
Manufacturer: NETGEAR
Size: 0.3 MB
Added : 1/24/2014
Number of pages: 23
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for NETGEAR ProSafe Wireless Access Point WG102. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with NETGEAR ProSafe Wireless Access Point WG102.

For your convenience

If looking through the NETGEAR ProSafe Wireless Access Point WG102 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual NETGEAR ProSafe Wireless Access Point WG102 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual NETGEAR ProSafe Wireless Access Point WG102 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
NETGEAR ProSafe Wireless Access Point WG102 User manual - Online PDF
Advertisement
« Page 1 of 23 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual NETGEAR ProSafe Wireless Access Point WG102 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to NETGEAR ProSafe Wireless Access Point WG102. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

XEPS103 Space-
Saving Powerline
Network Extender
NETGEAR, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
202-10239-01
February 2007

Summary of the content on the page No. 2

User Guide ii v1.0, February 2007

Summary of the content on the page No. 3

© 2007 by NETGEAR, Inc. All rights reserved. February 2007. Trademarks NETGEAR is a trademark of Netgear, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective holders. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document wi

Summary of the content on the page No. 4

Product and Publication Details Model Number: XEPS103 Publication Date: February 2007 Product Family: Powerline extender Product Name: XEPS103 Space-Saving Powerline Network Extender Home or Business Product: Home Language: English Publication Part Number: 202-10239-01 Publication Version Number: 1.0 Technical Support Please refer to the support information card that shipped with your product. By registering your product at http://www.netgear.com/register, we can provide you with faster expert

Summary of the content on the page No. 5

Contents XEPS103 Space-Saving Powerline Network Extender User Guide About This Manual .............................................................................................................iii Conventions, Formats, and Scope ..............................................................................iii How to Print This Manual ........................................................................................... iv Package Contents ..................................................

Summary of the content on the page No. 6

ii v1.0, February 2007

Summary of the content on the page No. 7

About This Manual The XEPS103 Space-Saving Powerline Network Extender User Guide describes how to install, ® configure, and troubleshoot the NETGEAR XEPS103 Powerline Extender. The information in this manual is intended for readers with intermediate computer and Internet skills. For information about product features, see the NETGEAR website at http://www.netgear.com. Conventions, Formats, and Scope The conventions, formats, and scope of this manual are described in the following sections. •

Summary of the content on the page No. 8

XEPS103 Space-Saving Powerline Network Extender User Guide • Scope. This manual is written for the XEPS103 Powerline Extender according to these specifications. Product version XEPS103 Space-Saving Powerline Network Extender Manual publication date February 2007 Product updates are available on the NETGEAR website at http://kbserver.netgear.com/products/XEPS103.asp. How to Print This Manual To print this manual, you can choose one of the following options, according to your needs. Your comput

Summary of the content on the page No. 9

XEPS103 Space-Saving Powerline Network Extender User Guide Package Contents The product package should contain the following items: • One XEPS103 Space-Saving Powerline Network Extender • Power cord • XEPS103 Resource CD, including: — This guide. — XEPS103 Installation Guide. — Encryption utility •Printed XEPS103 Installation Guide, Warranty Registration Card, and Support Information Card. If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the carton, inc

Summary of the content on the page No. 10

XEPS103 Space-Saving Powerline Network Extender User Guide Front Panel Status Lights The front panel of the XEPS103 contains status lights. You can use them to verify connections. The table below describes the lights on the front panel. Table 1-1. Front Panel Status Light Descriptions Status Description Light Power • On green solid. Power is supplied to the Powerline extender. • Off. Power is not supplied to the Powerline extender. Ethernet • On green solid. The Ethernet port is linked but th

Summary of the content on the page No. 11

XEPS103 Space-Saving Powerline Network Extender User Guide How the Powerline Extender Fits in Your Network Besides its function as a Powerline adapter, the XEPS103 acts as the power adapter for your router. Thus power can be provided to both the XEPS103 and your router through one AC power outlet. You can use the XEPS103 Powerline Extender with other HomePlug Powerline adapters (such as the XE103 Wall-plugged Ethernet Adapter) to implement or extend an Ethernet local area network (LAN) anywh

Summary of the content on the page No. 12

XEPS103 Space-Saving Powerline Network Extender User Guide – WPN824, WPNT834 – WNR834M, WNR834B If in doubt, check the label on your router’s power adapter. • Your Ethernet network is set up and an Ethernet LAN port is available on your router. • Your Internet connection is working. • Each computer or device to be used on your network has an Ethernet port. Connect the XEPS103 to the Router 1. Disconnect your router from its power adapter. 2. Plug the gray dual output cable, attached to the XEP

Summary of the content on the page No. 13

ON OFF XEPS103 Space-Saving Powerline Network Extender User Guide 3. Plug the XEPS103 Powerline Extender into an electrical outlet. Take care that the electrical outlet is not controlled by a wall switch so as to avoid someone does not unknowingly turn off power to your adapter. Check that the XEPS103 power light comes on. Do not connect the Powerline extender to a power strip, extension cord, or surge protector as this may prevent it from working properly or degrade the network performance

Summary of the content on the page No. 14

XEPS103 Space-Saving Powerline Network Extender User Guide Install the XEPS103 PowerLine Encryption Utility (Highly Recommended) The utility gives you the option of setting a unique encryption PowerLine network password. Important features: • The encryption password is not case-sensitive. • Each device must be set to exactly the same encryption password—if they are to communicate on the same network. PowerLine devices on different networks will not be able to communicate. • A default button

Summary of the content on the page No. 15

XEPS103 Space-Saving Powerline Network Extender User Guide To install the PowerLine Encryption Utility, follow these steps: 1. Insert the XEPS103 Resource CD into a CD drive on the computer that is connected to your router. The CD starts automatically. The following screen is displayed: Figure 1-3 If the CD does not start automatically: • Go to My Computer on the Windows Start menu, and double-click the drive that contains the XEPS103 Resource CD or • Select the CD drive and click on the Autor

Summary of the content on the page No. 16

XEPS103 Space-Saving Powerline Network Extender User Guide 3. A Welcome screen appears. Figure 1-4 4. Click Next and follow the instructions on the screen until the installation of the utility is complete. 5. When the installation is complete, click Finish. Set Your Network Password The fastest and most reliable way to set the network password is to set the password for all devices at once. To do this, you need the device password on the back label of each PowerLine device. There are two step

Summary of the content on the page No. 17

XEPS103 Space-Saving Powerline Network Extender User Guide b. Start the PowerLine encryption utility and click the Main tab. Figure 1-5 c. Check that the utility lists all the remote PowerLine devices d. Select a PowerLine device and, if more than one remote device is listed, identify it from the MAC address. e. Click Enter Password. Figure 1-6 9 v1.0, February 2007

Summary of the content on the page No. 18

XEPS103 Space-Saving Powerline Network Extender User Guide f. Enter the password recorded from the label on the back of the selected PowerLine device. g. Click OK. h. Repeat this step for all devices that you want attached to your network. 2. Set the network password. a. Select the Security tab. Figure 1-7 b. Type a password in the Private Network Password text box. c. Click Set All Devices. A pop-up window indicates that the operation was successful. 10 v1.0, February 2007

Summary of the content on the page No. 19

XEPS103 Space-Saving Powerline Network Extender User Guide Add a Device to an Existing PowerLine Network To add a device to a PowerLine network with the default network password, all you need to do is plug the new device into a power outlet. If the network password has been set, then you will need to run the PowerLine encryption utility to set the new device to the network password. How you do this depends on whether the computer running the PowerLine encryption utility is connnected directl

Summary of the content on the page No. 20

XEPS103 Space-Saving Powerline Network Extender User Guide Troubleshooting This chapter gives information about troubleshooting your XEPS103 Space-Saving Powerline Network Extender. After each problem description, instructions are provided to help you diagnose and solve the problem. NETGEAR Product Registration, Support, and Documentation Register your product at http://www.netgear.com/register. Product updates and Web support are available at: http://kbserver.netgear.com/products/XEPS103.a


Alternative user manuals
# User manual Category Download
1 NETGEAR 2.4 GHz MA111 User manual Network Card 8
2 NETGEAR 54 Mbps Wireless Game Adapter WGE111 User manual Network Card 18
3 NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111 User manual Network Card 28
4 NETGEAR 54 Mbps Wireless PC Card 32 WG511 User manual Network Card 19
5 NETGEAR 802.11b Wireless USB Adapter MA111 User manual Network Card 3
6 NETGEAR 54 Mbps Wireless PCI Adapter WG311 User manual Network Card 7
7 NETGEAR 802.11b ProSafe Wireless Access Point ME103 User manual Network Card 12
8 NETGEAR AGM721F User manual Network Card 1
9 NETGEAR 7200 Series User manual Network Card 2
10 NETGEAR 54 Mbps Wall WGX102 User manual Network Card 55
11 NETGEAR Double 108 Mbps Wireless USB 2.0 Adapter WG111U User manual Network Card 2
12 NETGEAR DG814 DSL User manual Network Card 0
13 NETGEAR DSL Modem Internet Gateway DG814 User manual Network Card 1
14 NETGEAR Double 108 Mbps Wireless PC Card WG511U User manual Network Card 1
15 NETGEAR ETHERNET HUB EN516 User manual Network Card 11
16 Sony BTA-NW1A User manual Network Card 2
17 Sony BKMW-E3000 User manual Network Card 2
18 Sony AC-SQ950D User manual Network Card 0
19 Sony BBV RX100 User manual Network Card 3
20 Sony CLIE A-AVZ-100-11 User manual Network Card 1