Summary of the content on the page No. 1
AT-6101GP
Power over Ethernet Injector
AT-6101GP PoE Injector
Installation Guide
613-001673 Rev B
Summary of the content on the page No. 2
Copyright © 2012 Allied Telesis, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc. Allied Telesis and the Allied Telesis logo are trademarks of Allied Telesis, Incorporated. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners. Allied Telesis, Inc. reserves the right to make changes in specifications and other informa
Summary of the content on the page No. 3
Electrical Safety and Emissions Standards This product meets the following standards. U.S. Federal Communications Commission Declaration of Conformity Manufacturer Name: Allied Telesis, Inc. Declares that the product: PoE Ethernet Injector Model Numbers: AT-6101GP This product complies with FCC Part 15B, Class B Limits: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device must not cause harmful interference, and (2) this devi
Summary of the content on the page No. 4
Chapter : Translated Safety Statements Important: The indicates that a translation of the safety statement is available in a PDF document titled “Translated Safety Statements” posted on the Allied Telesis website at www.alliedtelesis.com. 4
Summary of the content on the page No. 5
Table of Contents Preface .............................................................................................................................................................. 7 Document Conventions................................................................................................................................ 8 Allied Telesis Contact Information................................................................................................................ 9 Chapter 1: O
Summary of the content on the page No. 6
Contents 2
Summary of the content on the page No. 7
List of Figures Figure 1. AT-6101GP PoE Injector......................................................................................................................................14 Figure 2. AC Power Input Connector...................................................................................................................................14 Figure 3. AT-6101GP LEDs........................................................................................................................
Summary of the content on the page No. 8
Figures 4
Summary of the content on the page No. 9
List of Tables Table 1. Twisted Pair Cable for the 10/100/1000Base-T Ports ..........................................................................................13 Table 2. 10/100Base-TX Port LEDs ..................................................................................................................................15 Table 3. Physical Specifications .................................................................................................................................
Summary of the content on the page No. 10
Tables 6
Summary of the content on the page No. 11
Preface This guide contains the installation instructions for the AT-6101 PoE Injector Installation Guide. This preface contains the following sections: ❒ “Document Conventions” on page 8 ❒ “Allied Telesis Contact Information” on page 9 7
Summary of the content on the page No. 12
Preface Document Conventions This document uses the following conventions: Note Notes provide additional information. Caution Cautions inform you that performing or omitting a specific action may result in equipment damage or loss of data. Warning Warnings inform you that performing or omitting a specific action may result in bodily injury. 8
Summary of the content on the page No. 13
AT-6101 PoE Injector Installation Guide Allied Telesis Contact Information If you need assistance with this product, you may contact Allied Telesis technical support by going to the Support & Services section of the Allied Telesis web site at www.alliedtelesis.com/support. You can find links for the following services on this page: ❒ 24/7 Online Support - Enter our interactive support center to search for answers to your questions in our knowledge database, check support tickets, learn abo
Summary of the content on the page No. 14
Preface 10
Summary of the content on the page No. 15
Chapter 1 Overview This chapter contains the following sections: “Features” on page 12 “Hardware Description” on page 14 “LEDs” on page 15 11
Summary of the content on the page No. 16
Chapter 1: Overview Features Here are the features of this product: AT-6101GP PoE The major features of the AT-6101GP PoE Injector are: Injector Power over Ethernet Injector for 10/100/1000BaseT Remote power feeding Overload and short circuit protection Mixes Ethernet and power into RJ-45 port Delivers power up to 100 meters Light weight and compact size Plug-and-Play 10/100/1000 Mbps Twisted Pair Ports Power over Ethernet output power of 55V @ 0.6A IEEE802.3at compliant 10
Summary of the content on the page No. 17
AT-6101 PoE Injector Installation Guide Cable The cable requirements of the ports are given in Table 1. Requirements Table 1. Twisted Pair Cable for the 10/100/1000Base-T Ports Cable Type 10Mbps 100Mbps 1000Mbps Standard TIA/EIA 568-B- Yes Yes No compliant Category 3 shielded or unshielded cabling with 100 ohm impedance and a frequency of 16 MHz. Standard TIA/EIA 568-A- Yes Yes Yes compliant Category 5 or TIA/ EIA 568-B-compliant Enhanced Category 5 (Cat 5e) shielded or unshielded cabling
Summary of the content on the page No. 18
Chapter 1: Overview Hardware Description The AT-6101GP PoE Injector is shown in Figure 1. Figure 1. AT-6101GP PoE Injector DATA IN Port: This port, shown in Figure 1, in is an RJ-45 Ethernet connector where data is received and transmitted through the AT-6101GP PoE Injector. DATA OUT Port: This port, shown in Figure 1, is an RJ-45 Ethernet connector where data is received and transmitted through the AT-6101GP PoE Injector and provides PoE power along with the Ethernet data to a PoE device.
Summary of the content on the page No. 19
AT-6101 PoE Injector Installation Guide LEDs The LEDs of the AT-6101GP PoE Injector are shown in Figure 3 and described in Table 2. Figure 3. AT-6101GP LEDs Table 2. 10/100Base-TX Port LEDs LED State Description Off No AC power is being provided to the AC Power unit. Solid Green AC power is being provided to the unit. Off The port is not providing PoE power to the PoE DATA OUT port. Power Solid Green The port is providing PoE power to the DATA OUT port. 15
Summary of the content on the page No. 20
Chapter 1: Overview 16
