Summary of the content on the page No. 1
iSolo 230
English User’s Manual
GZ-AA3CBI-SNS/SNB/SNG
Summary of the content on the page No. 2
Thank you for purchasing GIGABYTE Tech. thermal product. GIGABYTE Tech. is dedicated to the integration of casing water/air-cooling solution technology to provide users with the most optimal solution for thermal dissipation. For further information and specifications of the “iSolo” series, please visit GIGABYTE Tech. website. (http:// www.gigabyte.com.tw) The following are not covered by the warranty: 1. Using the product incorrectly or in a manner other than the designed purpo
Summary of the content on the page No. 3
English Table of Contents 1. Components Introduction 3 1-1 Casing’s Internal Structure 4 1-2 Front, Rear, and Left Side Panel Structure 5 1.3 Removal of Side and Front Panel 5 2. Features 6 3. Specifications 7 4. Installation Instruction 8 4-1 Installation of Power Supply 8 4-2 Installation of Motherboard 8 4-3 Installation of Add-on Card 9 4-4 Installation of Front Multi-Media I/O port 10 4-5 Con
Summary of the content on the page No. 4
1.Components Introduction 1-1 Casing’s Internal Structure Power Supply Bay PCI Tool-Free Fastener 5.25” Front Device Bay Motherboard tray 3.5” Front Device Bay 3.5” Internal Device Bay Accessory Box Accessory Box ( Refer to the figures below for the attachments in the accessory box) Securing Runner x 6 Copper Stand Off Motherboard Power Supply x 9 Securing Screw x 9 Securing Screw x 4 Large Wire Clamp Mini Wire Cla
Summary of the content on the page No. 5
English 1-2 Front, Rear, and Left Side Panel Structure a) Left Side Panel b) Front Panel Ventilated Mesh Side Panel Kit Multi-Media I/O port Left Side Panel Power Switch HDD LED c) Rear Panel Rear Fan LCS Tube Outlets 1-3 Removal of Side and Front Panels 1-3.1 To remove side panels: 1-3.1a Remove the 4 thumb screws at the rear of the side panel, and detach the side panels. 1-3.2 To remove front panel: 1-3.2a Remove the left and right side panels, r
Summary of the content on the page No. 6
2.Feature -High Quality Design Innovative sleek dual-tone design coupled with sophisticated yet simple, precise workmanship. Illuminated and atmospherically-soothing backlight for a post-modern classy impression. -Complete Support Complete front panel multi-media support, include 2 x USB 2.0, 1 x IEEE1394, 1 x audio set (HD & AC97) Full Support of Gigabyte Tech. thermal solution LCS and Air cooling products lines Support ATX / Micro ATX / Flex ATX motherboard. -In
Summary of the content on the page No. 7
English 3.Specifications Model GZ-AA3CBI-SNS/SNB/SNG Case Type Middle Tower Size 200 x 440 x 494mm (W x H x D) Front Bezel Material Aluminum & Steel Mesh Color Silver / Black / Metallic Grey Side panel Ventilated Mesh Body material 0.7mm SECC Net weight 8.8 KG 5.25” drive bay (External) 5 3.5 drive bay (External) 2 3.5 drive bay (Internal) 3 Expansion slots 7 Form factor ATX / Micro ATX / Flex ATX System Fan (front) One 120mm silent fan System Fan (rear) One 120mm silent fan
Summary of the content on the page No. 8
4.Installation Instruction Please follow the reference sections in order for installation 4-1 Installation of Power Supply To facilitate the installation, it is recommended to place the chassis upright on the table. Required Tools: Power supply securing screw x 4; Cross screwdriver. 4-1.1 Remove side panel (see step 1-3.1 on page 5). Place the power supply into the power supply bay. 4-1.2 Use the 4 x securing screws t
Summary of the content on the page No. 9
English 4-2.3 Secure the motherboard with the securing screws (Please refer to your motherboard manual to check what type of motherboard you have). Motherboard Code name Motherboard screws Case copper post ATX A1-A9 9 9 Micro ATX U1-U9 9 9 Flex ATX F1-F6 6 6 4-3 Installation of Add-on Card The iSolo 230 does not require any tools for installation of add-on cards, e.g. Graphics card and network card. Required
Summary of the content on the page No. 10
4-4 Installation of Front Multi-Media I/O port Incorrect connection of the slots can cause the motherboard to malfunction or completely destroy the motherboard. Please read the manual carefully in the installation as incorrect installations or connection causing faults will void your warranty. The front panel consists of: (1) 2 x USB 2.0, 1 x IEEE 1394 and 1 x Audio Set (HD & AC’97) (2) Basic casing power switch control cable kit. Required Tools: None Ple
Summary of the content on the page No. 11
English 4-4.3 Insert the Audio connector into the corresponding socket on the motherboard. Pin Definition Pin Definition HD AUDIO 1 MIC2_L 6 FSENSE1 2 GND 7 FAUDIO_JD 3 MIC2_R 8 4 -ACZ_DET 9 LINE2_L 5 LINE2_R 10 FSENSE2 Pin Definition Pin Definition AC'97 1 MIC 6 NC 2 GND 7 NC 3 MIC Power 8 4 NC 9 Line Out(L) 5 Line Out(R) 10 NC (2) Basic casing power switch control cable kit. Follow the connectors list below for installation (see figure below) Connector Color Speak
Summary of the content on the page No. 12
4-6 Installation of 5.25” Front Device Bay 4-6.1 Detach the front panel (see step 1-3.2 on page 5) and remove the mesh drive rail from the front panel. 4-6.2 Remove the front EMI plate and attach the front panel onto the chassis. 4-6.3 Slide the 5.25” device into the drive bay from the front of the chassis. 4-6.4 Secure the 5.25” device with the internal Lock latch. Refer to the figure for installat
Summary of the content on the page No. 13
English 4-8.1 Fit the securing runners on both sides of the HDD and slide the HDD into the internal drive bay. Additional HDD can be installed in the 3.5” front device bay. Slide in the HDD and lock the internal latch to secure the HDD. 4-9 Foot Supports The iSolo 230 is supplied with four high-end skid-proof foot supports for ensuring the casing is firmly seated on the holding surface. 4-10 Liquid Cooling System Support
Summary of the content on the page No. 14
4-11 Recommended Cooling Products The iSolo 230 is recommended to be used with GIGABYTE Cooling products. 14 English
