Summary of the content on the page No. 1
-
CMOS 16 BIT SINGLE CHIP MICROCOMPUTER
S5U1C17801T1100
Hardware Manual
(Software Evaluation Tool for S1C17801)
Summary of the content on the page No. 2
NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products re- quiring high lev
Summary of the content on the page No. 3
Configuration of product number Devices S1 C 17xxx F 00E1 00 Packing specifications 00 : Besides tape & reel 0A : TCP BL 2 directions 0B : Tape & reel BACK 0C : TCP BR 2 directions 0D : TCP BT 2 directions 0E : TCP BD 2 directions 0F : Tape & reel FRONT 0G : TCP BT 4 directions 0H : TCP BD 4 directions 0J : TCP SL 2 directions 0K : TCP SR 2 directions 0L : Tape & reel LEFT 0M : TCP ST 2 directions 0N : TCP SD 2 directions 0P : TCP ST 4 directions 0Q : TCP SD 4 directions 0R : T
Summary of the content on the page No. 4
Summary of the content on the page No. 5
TABLE OF CONTENTS - Table of Contents - 1 Features .......................................................................................................................... 1 2 Contents of Package ..................................................................................................... 2 3 Name and Functions of Each Part ............................................................................... 3 Name of Each Part ............................................................
Summary of the content on the page No. 6
TABLE OF CONTENTS 19 Audio Connection Circuit .......................................................................................... 42 Switching Audio Master Clock ................................................................................................. 42 20 Exclusive Control of Ports ......................................................................................... 43 21 Serial .............................................................................................
Summary of the content on the page No. 7
1 FEATURES 1 Features S5U1C17801T1100 (Software eValuation Tool for S1C17801. Hereafter referred to as SVT17801)is an evaluation board for MCU S1C17801 manufactured by SEIKO EPSON. The SVT17801, consisting of the three boards, i.e., CPU, ICD and LCD, can debug software by connecting to the ICD and CPU boards without using ICD or other debug tool. By connecting to the CPU and LCD boards, the SVT17801 can also be used for simple evaluation of LCD panel display. In addition, serial port, AD in
Summary of the content on the page No. 8
2 CONTENTS OF PACKAGE 2 Contents of Package The following lists the contents of S5U1C17801T1100 package: (1) SVT17801 CPU Board (Main body) .......................... 1 (2) SVT17801 ICD Board ................................................. 1 (3) SVT17801 LCD Board ................................................ 1 (4) USB Cable .................................................................... 1 (5) Coin Battery (CR2032/3V) ......................................... 1 (6) AC Adapter .......
Summary of the content on the page No. 9
3 NAME AND FUNCTIONS OF EACH PART 3 Name and Functions of Each Part Name of Each Part The following describes name and functions of each part: (4) (2) (5) (3) (8) (6) (7) (9) (1) (10) (5) 3.5inch (1 1) STN QVGA B&W Membrane touch panel (12) (9) (16) (15) (14) (13) (9) Fig. 3.1.1 Name of Each Surface Mounted Part (with LCD Panel) (1) Power LED (Blue) (7) LED (13) Key switch (2) Speaker (Left) (8) POWER SW (14) Crystal oscillator (48MHz/32KHz) (3) RESET SW (9) GND pin (15) S1C17801 (4) USBmin
Summary of the content on the page No. 10
3 NAME AND FUNCTIONS OF EACH PART (1) (2) (3) (4) (5) Fig. 3.1.2 Name of Each Surface Mounted Part (without LCD Panel) (1) Infrared emitting module LED (3) SRAM (5) Expansion connector (LCD board) (2) FLASH (NOR) (4) FLASH (NAND) 4 EPSON S5U1C17801T1100 HARDWARE MANUAL (SOFTWARE EVALUATION TOOL FOR S1C17801) CPU board ICD board
Summary of the content on the page No. 11
3 NAME AND FUNCTIONS OF EACH PART (4) (6) (1) (7) (2) (5) (3) (3) (8) (9) (10) (16) (14) (12) (19) (18) (1 1) (17) (15) (13) Fig. 3.1.3 Name of Each Rear Face Mounted Part (1) Rotary encoder with Switch (7) Audio connector (IN) (14) GND pin (2) RESET SW (8) Power supply connector (5V) (15) USBminiB connector (3) ICDminiI/F (9) AudioCodec (16) Bus connector (Not available) (4) ICD board connector (10) Power Switch (17) Coin Battery (5) Placement of infrared receiver (1 1) AudioCodec Oscillator
Summary of the content on the page No. 12
3 NAME AND FUNCTIONS OF EACH PART (1) (2) Fig. 3.1.4 Name of Each Part Mounted on Rear Face of LCD Board (1) Connector (to connect LCD panel) (2) Connector (to connect CPU board) 6 EPSON S5U1C17801T1100 HARDWARE MANUAL (SOFTWARE EVALUATION TOOL FOR S1C17801)
Summary of the content on the page No. 13
3 NAME AND FUNCTIONS OF EACH PART Board Dimensions CPU Board Dimensions The following drawing shows dimensions of the CPU board. Parts installed within this dash line must be max. 8 mm in height 205 170 142 D1 Installation instruction diagram 85 46 S7 D1 J13 1 1 1 SP2 12 2 SP1 137 63 1 2 102.5 1 2 J7 J8 20 1 12 15 16 53 55 17 18 17 1 S1 S2 S3 1 2 J12 S4 S5 S6 9 9 9-φ7 25 102 9- φ3.3 hole 167 4 197 185 155 140 1 1 0 72.5 15 37.5 15 1 3 1 10 2 2 1 3 1 4 3 S8 4 1 U21 9 1 2 1
Summary of the content on the page No. 14
2 10 1 9 4-R2 3 NAME AND FUNCTIONS OF EACH PART ICD Board Dimensions The following drawing shows dimensions of the ICD board. 4-φ3.5 through hole JUSB 4 4 4- φ7 land 9 50 JICD 4.95 Fig. 3.2.2.1 ICD Board Dimensions ∗ Precautions • Unit for the above dimensions is millimeter (mm). • Material: FR4, Board thickness: 1.6 mm 8 EPSON S5U1C17801T1100 HARDWARE MANUAL (SOFTWARE EVALUATION TOOL FOR S1C17801) 5 1 5.5 21.5 37.5 43
Summary of the content on the page No. 15
3 NAME AND FUNCTIONS OF EACH PART LCD Board Dimensions The following drawing shows dimensions of the LCD board. 112 6-φ3.3(NTH) 3 19 20 5 5 51 51 102 6-φ7 26 55 6- φ3.3 hole 11 1 1 4 12 2 J102 J104 3 14 1 J103 29 17 1 (Hole) 18 2 J101 19 20 5 51 51 112 Fig. 3.2.3.1 LCD Board Dimensions ∗ Precautions • Unit for the above dimensions is millimeter (mm). • Board thickness: 1.6 mm • Figure 3.2.3.1 is a rear face drawing seen from the board surface. S5U1C
Summary of the content on the page No. 16
3 NAME AND FUNCTIONS OF EACH PART LCD Panel Board Dimensions The following drawing shows dimensions of the LCD panel (EW 3 2F 9 2FLWP manufactured by IMAGING DIS- PLAY). (Abstracted from specifications for the IMAGING DISPLAY EW32F92 series products) 96.2 30.0 91.3(touch panel) 81(viewing area of touch panel) 6.3 79(active area of touch panel) 7.3 77.79±0.3(viewing area of bezel) 7.9 79.79±0.01(display area) 8.405 PIN1 TOP IF2 ”A” VIEWING DIRECTION BOTTOM 0.6 IF1 1 13(P1.0 13),W=0.7 * 0.3±0.05
Summary of the content on the page No. 17
3 NAME AND FUNCTIONS OF EACH PART Main Parts CPU (U13) S1C17801 SEIKO EPSON CORP. Crystal oscillator (32.768kHz) (X1) FC-135 EPSON TOYOCOM CORP. Crystal oscillator (48MHz) (X2) FA-238 EPSON TOYOCOM CORP. Reset switch (RESET SW) (S8) SKQTLCE010 ALPS Expansion connector (J7) SSW-109-01-S-D SAMTEC Expansion connector (J8) SSW-108-01-S-D SAMTEC Expansion connector (J12) TSW-109-07-S-D SAMTEC Expansion connector (J13) TSW-106-07-S-D SAMTEC ICD board connector (J6) PS-10SD-D4T1-1 JAE SRAM
Summary of the content on the page No. 18
3 NAME AND FUNCTIONS OF EACH PART Functions of Each Part ICD Board The ICD board is a hardware tool (emulator) to facilitate the efficiency of software development for the S 1C 1 7 8 0 1. It controls communication between your PC and the target IC (S 1C 1 7 8 0 1) on the CPU board, providing simple software development environments for S 1C 1 7 8 0 1. For information about its functional difference from the ICD Mini (S5U1C17001H), a development tool supporting all S1C17 core product models,
Summary of the content on the page No. 19
3 NAME AND FUNCTIONS OF EACH PART ∗ Installing and Removing Coin Battery The following describes installation and removal procedures of a coin cell to/from the socket on the rear face of the CPU board. Install Step 1: Insert coin cell under the long metal contact on the socket with the plus (+) side up, and press it in the direction of the arrow. Fig. 3.4.2.1 Installing/Removing Coin Battery - 1/4 Install Step 2: Figure 3.4.2.2 shows the installation has been completed. Fig. 3.4.2.2 Inst
Summary of the content on the page No. 20
4 BLOCK DIAGRAM 4 Block Diagram Each block diagram for the the SVT17801 CPU board and ICD board is shown below. ICDmini ICD mini connector 3-color LED x1 Debug i/f GPIO ICD board Debug i/f ICD connector Card i/f NAND FLASH OSC1 32kHz USB USBminiB USB 2.0(FS) OSC3 SPI SD Card I/f SD Card 48MHz RTC Speaker Coin +RAM Audio output Cell Reset Audio jack 2 Audio (SW) I S RESET AD/DA Microphone ADx Audio input Audio jack ADx ADx Receiving module REMC REMC communi cation Infrared LED AD
