Summary of the content on the page No. 1
ADSL 2/2+
VPN Firewall Router
ADE-4300A/B, ADW-4300A/B
User's Manual
Summary of the content on the page No. 2
Copyright Copyright 2004 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET. PLANET makes no representations or warranties, either expressed or implied, with respect to the contents here
Summary of the content on the page No. 3
R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/CE OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE) The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommu- nications Terminal Equipment and Satellite Earth Station Equipment) As of April 8,2000. Safety This equipment is designed with the utmost
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Table of Contents CHAPTER 1 INTRODUCTION ......................................................................................1 ADE-4300/ADW-4300 Features.............................................................................1 Package Contents.................................................................................................5 Physical Details.....................................................................................................6 CHAPTER 2 INSTALLATION...
Summary of the content on the page No. 6
Diagnostics.......................................................................................................... 98 Remote Administration....................................................................................... 99 Routing............................................................................................................... 101 Upgrade Firmware............................................................................................. 105 CHAPTER 8 MODEM MODE ...
Summary of the content on the page No. 7
Chapter 1 Introduction 1 This Chapter provides an overview of the ADE-4300/ADW-4300's fea- tures and capabilities. Congratulations on the purchase of your new ADE-4300/ADW-4300. The ADE- 4300/ADW-4300 is a multi-function device providing the following services: • ADSL 2/2+ Modem. • Shared Broadband Internet Access for all LAN users. • Wireless Access Point for 802.11b and 802.11g Wireless Stations. (ADW- 4300 only) • VPN Gateway to allow secure VPN connections over the Internet. • 4-P
Summary of the content on the page No. 8
ADE-4300/ADW-4300 User Guide • IPoA, PPPoE, PPPoA, Direct Connection Support. The ADE-4300/ADW- 4300 supports all common connection methods. • Auto-detection of Internet Connection Method. In most situations, the ADE-4300/ADW-4300 can test your ADSL and Internet connection to determine the connection method used by your ISP. • Fixed or Dynamic IP Address. On the Internet (WAN port) connection, the ADE-4300/ADW-4300 supports both Dynamic IP Address (IP Address is allocated on connection
Summary of the content on the page No. 9
Introduction Wireless Features (ADW-4300 only) • Standards Compliant. The ADW-4300 complies with the IEEE802.11g (DSSS) specifications for Wireless LANs. • Supports both 802.11b and 802.11g Wireless Stations. The 802.11g standard provides for backward compatibility with the 802.11b standard, so both 802.11b and 802.11g Wireless stations can be used simultaneously. • Speeds to 54Mbps. All speeds up to the 802.11g maximum of 54Mbps are supported. • WEP support. Support for WEP (Wired
Summary of the content on the page No. 10
ADE-4300/ADW-4300 User Guide tion and even the existence of each PC is hidden. From the external viewpoint, there is no network, only a single device - the ADE-4300/ADW-4300. • Firewall. All incoming data packets are monitored and all incoming server re- quests are filtered, thus protecting your network from malicious attacks from external sources. • Protection against DoS attacks. DoS (Denial of Service) attacks can flood your Internet connection with invalid packets and connection requ
Summary of the content on the page No. 11
Introduction Package Contents The following items should be included. If any of these items are damaged or missing, please contact your dealer immediately. • The ADE-4300/ADW-4300 Unit • Quick Installation Guide • User’s Manual CD • Power Adapter • 1 RJ-45 Cable • 1 RJ-11 (ADSL) cable 5
Summary of the content on the page No. 12
ADE-4300/ADW-4300 User Guide Physical Details Front-mounted LEDs of ADE-4300 Figure 2-1: Front Panel of ADE-4300 Front-mounted LEDs of ADW-4300 Figure 3-2: Front Panel of ADW-4300 PWR LED On - Power on. Off - No power. STATUS Off - Normal operation. LED Blinking - This LED blinks during start up, and during a Firmware Upgrade. For each port, there are 2 LEDs, to indicate the connection speed LAN LED (10BaseT or 100BaseT) of each port. • 100 LNK/ACT - This will be ON if t
Summary of the content on the page No. 13
Introduction Rear Panel Figure 4-1: Rear Panel of ADE-4300 Figure 5-2: Rear Panel of ADW-4300 This button will reset the ADE-4300/ADW-4300 to the factory RESET Button default settings. (Reset to De- To do this, press and hold the Reset Button for five (5) sec- faults) onds, until the Status LED is lit, then release the Reset Button, and wait the ADE-4300/ADW-4300 to restart using the factory default values. POWER port Connect the supplied power adapter here. 10/100BaseT Use stan
Summary of the content on the page No. 14
Chapter 2 Installation 2 This Chapter covers the physical installation of the ADE-4300/ADW- 4300. Requirements • Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors. • TCP/IP protocol must be installed on all PCs. • For Internet Access, an Internet Access account with an ISP, and a DSL connec- tion. • To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE 802.11g or IEEE 802.11b specifications. (ADW-4300 only) Procedure
Summary of the content on the page No. 15
Installation 2. Connect LAN Cables Use standard LAN cables to connect PCs to the Switching Hub ports on the ADE- 4300/ADW-4300. Both 10BaseT and 100BaseT connections can be used simulta- neously. If required, connect any port to a normal port on another Hub, using a standard LAN cable. Any LAN port on the ADE-4300/ADW-4300 will automatically function as an "Uplink" port when required. 3. Connect ADSL Cable Connect the supplied ADSL cable from to the WAN port on the ADE-4300/ADW- 4300 (the
Summary of the content on the page No. 16
Chapter 3 Setup 3 This Chapter provides Setup details of the ADE-4300/ADW-4300. Overview This chapter describes the setup procedure for: • Internet Access • LAN configuration • Wireless setup (ADW-4300 only) • Assigning a Password to protect the configuration data. PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Configuration. Other configuration may also be required, depending on which features and functions of the ADE-4300/ADW-4300 you wish
Summary of the content on the page No. 17
Setup Configuration Program The ADE-4300/ADW-4300 contains an HTTP server. This enables you to connect to it, and configure it, using your Web Browser. Your Browser must support JavaScript. The configuration program has been tested on the following browsers: • Netscape V4.08 or later • Netscape 7 • Internet Explorer V5.01 or later Preparation Before attempting to configure the ADE-4300/ADW-4300, please ensure that: • Your PC can establish a physical connection to the ADE-4300/ADW-4300
Summary of the content on the page No. 18
ADE-4300/ADW-4300 User Guide If you can't connect If the ADE-4300/ADW-4300 does not respond, check the following: • The ADE-4300/ADW-4300 is properly installed, LAN connection is OK, and it is powered ON. You can test the connection by using the "Ping" command: • Open the MS-DOS window or command prompt window. • Enter the command: ping 192.168.0.1 If no response is received, either the connection is not working, or your PC's IP address is not compatible with the ADE-4300/ADW-4300's
Summary of the content on the page No. 19
Setup Common Connection Types Type Details ISP Data required Dynamic Your IP Address is allocated a) ADSL parameters (VPI and IP Address automatically, when you con- VCI) may be required, if they nect to you ISP. cannot be detected automati- cally. b) Some ISP's may require you to use a particular Hostname or Domain name, or MAC (physical) address. Static (Fixed) Your ISP allocates a perma- a) ADSL parameters (VPI and IP Address nent IP Address to you. VCI) may be required, if they
Summary of the content on the page No. 20
ADE-4300/ADW-4300 User Guide Home Screen After finishing the Setup Wizard, you will see the Home screen. When you connect in future, you will see this screen when you connect. An example screen is shown below. Figure 7: Home Screen Main Menu The main menu, on the left, contains links to the most-commonly used screen. To see the links to the other available screens, click "Advanced" or "Administration". The main menu also contains two (2) buttons: • Log Out - When finished, you shoul
