Summary of the content on the page No. 1
SNA6500_Eng_Rob.qxd 17-03-2005 09:56 Pagina 1
SNA6500
EN User Manual 1
VERSION 1.0
Summary of the content on the page No. 2
SNA6500_Eng_Rob.qxd 17-03-2005 09:56 Pagina 2
Summary of the content on the page No. 3
SNA6500_Eng_Rob.qxd 17-03-2005 09:56 Pagina 3 PWR XDSL On Line WL L1 L2 L3 L4 ADSL POWER RESET LAN1 LAN2 LAN3 LAN4 12 3 4 1 ADSL Port ADSL port (RJ-11). Connect your ADSL line to this port. 2 Power Inlet Connect the included power adapter to this inlet. Warning: Using the wrong type of power adapter may damage the ADSL Wireless Base Station. 3 Reset Button Use this button to reset the power and restore the default factory settings. To reset without losing configuration settings, see ‘Rese
Summary of the content on the page No. 4
SNA6500_Eng_Rob.qxd 17-03-2005 09:56 Pagina 4 EN Table of Contents 5Introduction 5 About the ADSL Wireless Base Station 5Features and Benefits 7 Installation 7 System Requirements 7 Hardware Description 7 LED Indicators 7 ISP Settings 8 Connect the System 8 Connect the ADSL Line 8 Phone Line Configuration 8 Connect the Power Adapter 9 Configuring Client PC 9TCP/IP Configuration 9 Windows 98/Me 10 Disable HTTP Proxy 11 Obtain IP Settings from Your ADSL Wireless Base Station 12 Windows NT 4.0 1
Summary of the content on the page No. 5
SNA6500_Eng_Rob.qxd 17-03-2005 09:56 Pagina 5 EN Introduction SNA6500 Congratulations on your purchase of the Philips ADSL Wireless Base Station, hereafter referred to as the ‘ADSL Wireless Base Station’. We are proud to provide you with a powerful yet simple communication device for connecting your local area network (LAN) to the Internet. For those who want to surf the Internet in the most secure way, this router provides a convenient and powerful solution. About the ADSL Wireless Base Sta
Summary of the content on the page No. 6
SNA6500_Eng_Rob.qxd 17-03-2005 09:56 Pagina 6 EN Security The ADSL Wireless Base Station supports security features that deny Internet access to specified users, or filter all requests for specific services that the administrator does not want to serve. The ADSL Wireless Base Station's firewall also blocks common hacker attacks, including IP Spoofing, Land Attack, Ping of Death, IP with zero length, Smurf Attack, UDP port loopback, Snork Attack, TCP null scan, and TCP SYN flooding. WEP (Wired
Summary of the content on the page No. 7
SNA6500_Eng_Rob.qxd 17-03-2005 09:57 Pagina 7 EN Installation System Requirements • ADSL line installed by your Internet Service Provider. •A computer using a fixed IP address or dynamic IP address assigned via DHCP, as well as a gateway server address and DNS server address from your service provider. •A computer equipped with a 10/100 Mbps network adapter, a USB-to-Ethernet converter or an IEEE 802.11g wireless network adapter. • TCP/IP network protocols installed on each PC that will acces
Summary of the content on the page No. 8
SNA6500_Eng_Rob.qxd 17-03-2005 09:57 Pagina 8 EN Connect the System The ADSL Wireless Base Station can be positioned at any convenient location in your office or home. No special wiring or cooling requirements are needed. You should, however, comply with the following guidelines: • Keep the ADSL Wireless Base Station away from any heating devices. • Do not place the ADSL Wireless Base Station in a dusty or wet environment. You should also remember to turn off the power, remove the power cord
Summary of the content on the page No. 9
SNA6500_Eng_Rob.qxd 17-03-2005 09:57 Pagina 9 EN Configuring Client PC After completing hardware setup by connecting all your network devices, you need to configure your computer to connect to the ADSL Wireless Base Station. See: ‘Windows 98/Me’ on page 9 ‘Windows NT 4.0’ on page 12 ‘Windows 2000’ on page 14 ‘Windows XP’ on page 14 or ‘Configuring Your Macintosh Computer’ on page 16 depending on your operating system. TCP/IP Configuration To access the Internet through the ADSL Wireless Base
Summary of the content on the page No. 10
SNA6500_Eng_Rob.qxd 17-03-2005 09:57 Pagina 10 EN 3 In the Network window, under the Configuration tab, double-click the TCP/IP item listed for your network card. 4 In the TCP/IP window, select the IP Address tab. If ‘Obtain an IP address automatically’ is already selected, your computer is already configured for DHCP. If not, select this option. 5 Windows may need your Windows 98/Me CD to copy some files. After it finishes copying, it will prompt you to restart your system. Click Yes and
Summary of the content on the page No. 11
SNA6500_Eng_Rob.qxd 17-03-2005 09:57 Pagina 11 EN 3 In the Internet Options window, click the Connections tab. Next, click the LAN Settings... button. 4 Clear all the check boxes. 5 Click OK, and then click OK again to close the Internet Options window. Obtain IP Settings from Your ADSL Wireless Base Station Now that you have configured your computer to connect to your ADSL Wireless Base Station, it needs to obtain new network settings. By releasing old DHCP IP settings and renewing them wit
Summary of the content on the page No. 12
SNA6500_Eng_Rob.qxd 17-03-2005 09:57 Pagina 12 EN 3 In the IP Configuration window, select your network card from the drop-down menu. Click Release and then click Renew. Verify that your IP address is now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.2.1. These values confirm that your ADSL Wireless Base Station is functioning. Click OK to close the IP Configuration window. Windows NT 4.0 1 On the Windows desktop, click Start/Settings/Control Panel. 2 Do
Summary of the content on the page No. 13
SNA6500_Eng_Rob.qxd 17-03-2005 09:57 Pagina 13 EN 5 In the Adapter drop-down list, make sure your Ethernet adapter is selected. 6 If ‘Obtain an IP address automatically’ is already selected, your computer is already configured for DHCP. If not, select this option and click ‘Apply.’ 7 Click the DNS tab to see the primary and secondary DNS servers. Record these values, and then click ‘Remove.’ Click ‘Apply’, and then ‘OK.’ 8 Windows may copy some files, and will then prompt you to restart your
Summary of the content on the page No. 14
SNA6500_Eng_Rob.qxd 17-03-2005 09:58 Pagina 14 EN 4 Type ‘EXIT’ and press the ENTER key to close the Command Prompt window. Your computer is now configured to connect to the ADSL Wireless Base Station. Windows 2000 1 On the Windows desktop, click Start/Settings/Network and Dial-Up Connections. 2 Click the icon that corresponds to the connection to your ADSL Wireless Base Station. 3 The connection status screen will open. Click Properties. 4 Double-click Internet Protocol (TCP/IP). 5 If ‘Obta
Summary of the content on the page No. 15
SNA6500_Eng_Rob.qxd 17-03-2005 09:58 Pagina 15 EN 1 On the Windows desktop, click Start/Programs/Accessories/Command Prompt. 2 In the Command Prompt window, type ‘IPCONFIG/RELEASE’ and press the ENTER key. 3 Type ‘IPCONFIG /RENEW’ and press the ENTER key. Verify that your IP Address is now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.2.1. These values confirm that your ADSL Wireless Base Station is functioning. 4 Type ‘EXIT’ and press the ENTER key to
Summary of the content on the page No. 16
SNA6500_Eng_Rob.qxd 17-03-2005 09:58 Pagina 16 EN 3 Type ‘IPCONFIG /RENEW’ and press the ENTER key. Verify that your IP Address is now 192.168.2.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.2.1. These values confirm that your ADSL Wireless Base Station is functioning. Type ‘EXIT’ and press the ENTER key to close the Command Prompt window. Your computer is now configured to connect to the ADSL Wireless Base Station. Configuring Your Macintosh Computer You may fin
Summary of the content on the page No. 17
SNA6500_Eng_Rob.qxd 17-03-2005 09:58 Pagina 17 EN Disable HTTP Proxy You need to verify that the ‘HTTP Proxy’ feature of your web browser is disabled. This is so that your browser can view the ADSL Wireless Base Station's HTML configuration pages. The following steps are for Internet Explorer. Internet Explorer 1 Open Internet Explorer and click the Stop button. Click Explorer/Preferences. 2 In the Internet Explorer Preferences window, under Network, select Proxies. 3 Uncheck all check boxe
Summary of the content on the page No. 18
SNA6500_Eng_Rob.qxd 17-03-2005 09:58 Pagina 18 Setting up the ADSL Wireless Base Station EN Setup Wizard Getting Started Make sure that you have a working ADSL subscription and that the ADSL wireless base station is connected to the ADSL phone line. You can verify that the cable is connected correctly by looking at the light on the front of the ADSL wireless base station. The 'ASDL' light should be on solid after approximately 1 minute. Wireless settings In step 2 you can change the Wireless
Summary of the content on the page No. 19
SNA6500_Eng_Rob.qxd 17-03-2005 09:58 Pagina 19 EN Connection Status Step 5 shows if you have internet connection or not. If you have connection you will see the following message. If the connection failed you will see the following message. Please check that your ADSL line is active and that you've entered the correct ISP settings. 19
Summary of the content on the page No. 20
SNA6500_Eng_Rob.qxd 17-03-2005 09:59 Pagina 20 Configuring the ADSL Wireless Base Station EN ADSL / Internet settings ADSL Status Click on ‘ADSL Status’ which is located on the left side of the screen. The left-hand side displays the main menu and the right-hand side shows descriptive information. ISP settings Enter the ATM (Asynchronous Transfer Mode) virtual connection parameters here. Parameters This page allows you specify the ADSL standards to operate with. You may explicitly set specifi
