Summary of the content on the page No. 1
Wireless Multi-Function
Access Point
A02-AP-W54
Quick Start Guide
A02-AP-W54_GE01
Summary of the content on the page No. 2
Wireless Multi-Function Access Point ENGLISH This product is covered by Atlantis Land 3 years Fast-Swap warranty. For more detailed informations please refer to the web site www.atlantis-land.com. For more detailed instructions on configuring and using the Switch , please refer to the online manual. ITALIANO Questo prodotto è coperto da garanzia Atlantis Land Fast-Swap della durata di 3 anni. Per maggiori dettagli in merito o per accedere alla documentazione
Summary of the content on the page No. 3
Wireless Multi-Function Access Point Register your product! Register your product! Register your product! www.atlantis-land.com www.atlantis-land.com www.atlantis-land.com Registration on the web site www.atlantis-land.com within 15 days from the purchase of the product dismiss the customer from showing a valid proof of purchase (Sale Receipt or Invoice) in case of the request of intervention. For further information we invite you to look at our web site at
Summary of the content on the page No. 4
Wireless Multi-Function Access Point Congratulations on your purchase of this IEEE 802.11g Wireless Multi-Function Access Point. For more detailed instructions on configuring and using the Wireless Multi-Function Access Point, please refer to the online manual. 1.1 An Overview The device for a total freedom of movement without losing the connection. Easy to be installed and fast and flexible, with Wireless Multi-Function Access Point there is no more obligation fo
Summary of the content on the page No. 5
Wireless Multi-Function Access Point 1.2 System Requirements Before installing the Adapter, your PC should meet the following: Intel® Pentium®III 600Mhz or compatible processor with TCP/IP stack Iinternet Explorer V6.0 on Netscape V6.0 CDRom 1.3 Package Contents Unpack the package and check all the items carefully. If any item contained is damaged or missing, please contact your local dealer as soon as possible. Also, keep the box and packing materials in case you n
Summary of the content on the page No. 6
Wireless Multi-Function Access Point The antenna’s position enhances the receiving sensitivity. Visually inspect if the Power Adapter was fully plugged to the device power jack (Connect the Power Adapter DC plug to the AP’s power jack DC-IN). 1.5 Location Locate an optimum location for the Wireless LAN Access Point (AP). The best place for your AP is usually the center of your wireless network, with line of sight to all of your mobile stations. Try to place the AP i
Summary of the content on the page No. 7
Wireless Multi-Function Access Point 1.6 Using Wireless Access Point 1.6.1 The Front LEDs The table below shows the LED Indicator of the Wireless Multi-Function Access Point. LED Meaning POWER This indicator lights green when the Access Point receives power. Otherwise, it turns off. LAN The indicator lights green when the LAN port is connected to a 100Mbps Ethernet station, the indicator blinks green while transmitting or receiving data on the 100Mbps Ethernet networ
Summary of the content on the page No. 8
Wireless Multi-Function Access Point Port Meaning Reverse There are two antennas in the rear SMA panel, when you need to connect Connectors extended Antenna, connect to Antenna 2 for the extended antenna. When you are using one antenna model, connect the extended antenna directly to the antenna screw in the rear panel. LAN Ethernet uplink port with 10/100Mbps Fast Ethernet connections, connect this port to switch/hub. Reset The Reset function is to reset the settin
Summary of the content on the page No. 9
Wireless Multi-Function Access Point 1.7.1 IP Adress This section describes the configuration required by LAN- attached PCs that communicate with the Wireless Multi- Function Access Point, either to configure the device or for network access. These PCs must have an Ethernet interface (or wireless adapter) installed properly, be connected to the Wireless Multi-Function Access Point either directly or through an external repeater hub or by wireless, and have TCP/IP installed
Summary of the content on the page No. 10
Wireless Multi-Function Access Point 1.9 Accessing the Access Point Web Configurator Before you configure this device, note that when the AP is configured through an Ethernet connection, make sure the manager PC must be set on same the IP network. Open Internet Explorer 5.0 or above Web browser. Enter IP address http://192.168.1.100 (the factory-default IP address setting) to the address location. Click OK. The screen will show the station summary of the AP when yo
Summary of the content on the page No. 11
Wireless Multi-Function Access Point For more advance configuration, please refer to User’s Manual in the CD.
Summary of the content on the page No. 12
Atlantis Land S.p.A. Viale De Gasperi, 122 Mazzo di Rho – MI – Italy info@atlantis-land.com sales@atlantis-land.com
