Summary of the content on the page No. 1
Built-In Electr ic Oven
User information
EOB6637
822 928 042-A-280306-02 g
Summary of the content on the page No. 2
Dear customer, Please read this User Information carefully and keep it to refer to at a later date. Pass this User Information on to any subsequent owner of the appliance. The following symbols are used in the text: 1 Safety instructions Warning: Notes that concern your personal safety. Attention: Notes that show how to avoid damage to the appliance. 3 Useful tips and hints 2 Environmental information 2
Summary of the content on the page No. 3
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 General Overview . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
Cleaning and Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Outside of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Oven interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Fat Filter . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 5
Operating Instructions 1 Safety instructions 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Di- rective 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Electrical safety This appliance must be only connected by a registered electrician. In the event of a fault or damage to the appliance: Take the fuses out or switch off. Repairs to the appliance mus
Summary of the content on the page No. 6
How to avoid damage to the appliance Do not line the oven with aluminium foil and do not place baking trays, pots, etc. on the oven floor, as the heat that builds up will damage the oven enamel. Fruit juices dripping from the baking tray will leave stains, which you will not be able to remove. For very moist cakes, use a deep tray. Do not put any strain on the oven door when open. Never pour water directly into the oven when it is hot. This could cause damage to or discoloration of t
Summary of the content on the page No. 7
Description of the Appliance General Overview Control panel Door handle Full glass door Control Panel Oven Power Indicator Temperature Pilot Light Time display Clock function buttons Oven Functions Temperature selector 7
Summary of the content on the page No. 8
Oven Features Top heat and heating elements Oven lighting Shelf positions Fat Filter Oven lighting Fan heating element Fan Bottom Heat Oven shelf runners, removable Oven accessories Oven shelf For cookware, cake tins, roasts and grilled foods. Baking tray For cakes and biscuits. Roasting Pan For baking and roasting or as a pan for collecting fat. 8
Summary of the content on the page No. 9
Before Using for the first time Setting and changing the time 3 The oven only operates when the time has been set. When the appliance has been connected to the electrical supply or when there has been a power cut, the function indicator Time flashes automatically. 1.To change a time that has already been set, press the Selection button re- peatedly until the function indicator Time flashes. 2.Using the or button, set the cur- rent time. After approx. 5 seconds, the flashing stops and t
Summary of the content on the page No. 10
Initial Cleaning Before using the oven for the first time you should clean it thoroughly. 1 Caution: Do not use any caustic or abrasive cleaners. The surface could be damaged. 3 To clean metal fronts use commercially available cleaning agents. 1.Set the oven functions dial to Light . 2.Remove all accessories and the shelf support rails and wash them with warm water and washing up liquid. 3.Then wash out the oven with warm water and washing-up liquid, and dry. 4.Wipe the front of the appliance
Summary of the content on the page No. 11
Using the Oven Switching the Oven On and Off Oven Functions Temperature selector Oven Power Indicator Temperature Pilot Light 1.Turn the oven functions dial to the desired function. 2.Turn the temperature selector to the desired temperature. The power indicator is lit as long as the oven is in operation. The temperature pilot light is lit as long as the oven is heating up. 3.To turn the oven off, turn the oven functions dial and the temperature se- lector to the Off position. 3 Cooling fan The
Summary of the content on the page No. 12
Oven Functions The oven has the following functions: Oven function Application Heating element/fan Light Using this function you can light up --- the oven interior, e.g. for cleaning. Hot air For roasting and baking on up to Rear heating ele- three levels at the same time. ment, fan Set the oven temperatures 20-40 °C lower than when using up- per/lower heat. Pizza setting For baking on one oven level dishes Bottom heat, rear wall that require more intensive brown- heating element, fan ing and
Summary of the content on the page No. 13
Inserting the Oven Shelf, Baking Tray and Roasting Pan 3 Shelf runner safety and anti-tip device As a shelf runner safety device, all insertable components have a small curved indentation at the bottom on the right and left-hand edge. Always insert insertable components so that this indentation is at the back of the oven interior. This indentation is also important for preventing the in- sertable components from tipping. Inserting the baking tray or roasting pan Push the baking tray or r
Summary of the content on the page No. 14
Inserting/Removing the Grease Filter Only use the grease filter when roast- ing to protect the rear heating elements from fat splashes. Inserting the grease filter Hold the grease filter by the grip and insert the two mounts down- wards into the opening on the rear wall of theoven (fan opening). Taking out the grease filter Hold the grease filter by the grip and unhook it. 14
Summary of the content on the page No. 15
Clock Functions Function Indicators Time display Function Indicators Selector Button Button Button Countdown To set a countdown. A signal sounds after the time has elapsed. This function does not affect the functioning of the oven. Cook time To set how long the oven is to be in use. End time To set when the oven is to switch off again. Time To set, change or check the time (See also section “Before Using for the First Time”). 15
Summary of the content on the page No. 16
3 How to use the clock functions After a function has been selected, the corresponding function indicator flashes for about 5 seconds. During this period, the desired times can be set using the or button. When the desired time has been set, the function indicator continues to flash for approx. 5 seconds. After that the function indicator is then lit. The set time begins to run. Press any of the buttons to stop the audible signal. The desired oven function and temperature can be sel
Summary of the content on the page No. 17
Countdown 1.Press the Selection button repeated- ly until the function indicator Countdown flashes. 2.Using the or button set the de- sired Countdown (max. 2 hours 30 minutes). After approx. 5 seconds the display shows the time remaining. The function indicator Countdown lights up. When the time has elapsed, the function indicator flashes and an audible signal sounds for 2 minutes. The signal can be stopped by pressing any button. 17
Summary of the content on the page No. 18
Cook time 1.Press the Selection button repeated- ly until the function indicator Cook time flashes. 2.Using the or button set the de- sired cooking time. After approx. 5 seconds the display re- turns to showing the current time. The function indicator Cook time lights up. When the time has elapsed, the function indicator flashes, an audible signal sounds for 2 minutes and the oven switches itself off. 3.The signal and the programme can be stopped by pressing any button. 18
Summary of the content on the page No. 19
End time 1.Press the Selection button repeated- ly until the function indicator End time flashes. 2.Using the or button set the de- sired switch-off time. After approx. 5 seconds the display re- turns to showing the current time. The function indicator End time lights up. When the time has elapsed, the function indicator flashes, an audible signal sounds for 2 minutes and the oven switches itself off. 3.The signal and the programme can be stopped by pressing any button. 19
Summary of the content on the page No. 20
Cook time and End time combined 3 Cook time and End time can be used simultaneously, if the oven is to be switched on and off automatically at a later time. 1.Using the Cook time function, set the time required for cooking the dish. In this example, 1 hour. 2.Using the End time function, set the time at which the dish should be ready. In this case 14:05:00. The function indicators Cook time and End time light up and the current time is shown in the display. In this case 12:05. The oven swi
