Summary of the content on the page No. 1
INSTALLATION & OPERATING
INSTRUCTIONS FOR
THE GARLAND 1/2-SIZE
ELECTRIC MOISTURE PLUS,
MODEL MPOE5L
WARNING:
IMPROPER INSTALLATION, ADJUSTMENT,
FOR YOUR SAFETY
ALTERATION, SERVICE OR MAINTENANCE CAN
CAUSE PROPERTY DAMAGE, INJURY OR DEATH.
DO NOT STORE OR USE GASOLINE OR OTHER
READ THE INSTALLATION, OPERATION AND
FLAMMABLE VAPORS OR LIQUIDS IN THE
MAINTENANCE INSTRUCTIONS THOROUGHLY
VICINITY OF THIS OR ANY OTHER APPLIANCE.
BEFORE INSTALLING OR SERVICING
THIS EQUIPMENT.
PLEASE READ ALL SECTION
Summary of the content on the page No. 2
Page 2 Part # 4518084 Rev. 1 (09/04)
Summary of the content on the page No. 3
TABLE OF CONTENTS DIMENSIONS AND SPECIFICATIONS ........................................................................4 INSTALLATION ..............................................................................................................5 Electrical Connection ........................................................................................................5 WATER CONNECTION .................................................................................................5 OPERATING
Summary of the content on the page No. 4
DIMENSIONS AND SPECIFICATIONS ���� Installation Notes: ������ ������ ��������� ������ ������ • Counter-mounted equipment shall be designed to be sealed to the counter, table, raised base, or shelf. � ��������� ��� ������� � �� � ������� ��� • Each oven deck requires a �� ������������ � ��� ������� separate electrical connection. ������� � • Garland recommends a separate 30 amp circuit be ������� provided for each oven. ������� � ��� • Customer must provide a ������� � 1/4" NPT wate
Summary of the content on the page No. 5
INSTALLATION Proper placement of the oven will ensure operator • Visually inspect all electrical connections. A wiring convenience and satisfactory performance. Adequate diagram is affixed to the inside surface of the control clearance must be provided for cleaning, servicing, panel/body side section. and proper operation. (Refer to chart on page 4. for Installation of the wiring must be made in accordance minimum clearances.) with local codes, and the National Electrical Code, ASNI/NFPA 70-
Summary of the content on the page No. 6
OPERATING INSTRUCTIONS Description of Controls Display Th e display shows information about the control and its current operation mode i.e.: product name, time, program mode, etc. On/Off Button Th e On/Off Button is used to toggle the oven on/off . Upper Right Blank/Temp Button Th is button has several functions: 1. Pressing the temp button will display the actual and set temperatures of the oven. Th e temperatures will be displayed for three, (3) seconds. 2. Holding the temp button for thr
Summary of the content on the page No. 7
OPERATING INSTRUCTIONS continued... *NOTE: Preheat Bread has additional functions: Product Buttons (1 – 17) 1. In Programming, Preheat Bread 425 The product buttons are used to select pre-programmed scrolls through available values (i.e. high/ recipes for each product. (Programming is available for low fan speed) and is used as the NO all product buttons.) button. Number Buttons 1 – 0: 2. In Diagnostics Mode, the Preheat Bread The first ten Product Buttons, 425 button is used to scroll th
Summary of the content on the page No. 8
OPERATING INSTRUCTIONS continued... 4. The external display will show the count down time Control Operation of the item to be done first, then will switch to the Startup and Normal Operation next item to be done and so on. • Pressing the On/Off button will power up the • NOTE: To cancel a cook cycle, Press the Cancel control and the oven will begin heating to Preheat button. If more than one cook cycle is active, pressing Cancel will end the last cycle started. The user can select Preheat
Summary of the content on the page No. 9
OPERATING INSTRUCTIONS continued... 5. Next, the display will prompt for the Cook Time. Control Programming Enter the cooking time using buttons 1 – 0 and Recipe Programming press the “ENTER” (lower right blank) button. • NOTE: In programming product buttons (1-17), each button can have different steps called Profiles. Each profile can change the fan speed, cook temperature, cook time, alarm, time mode, and moisture for a product. 6. Next, the display will ask for Alarm Time (to rotate If
Summary of the content on the page No. 10
OPERATING INSTRUCTIONS continued... 9. The display will then ask if you would like to continue programming for this product. Press the “YES” (upper right blank) button to program additional profiles (profile 2-6). Press the “NO” 3. Next, the Software Number will be displayed. (Preheat Bread 425) button to exit programming Press “ENTER” (lower right blank) to continue. for this product. 4. Next, the control Download Number will be • NOTE: If programming additional profiles, repeat dis
Summary of the content on the page No. 11
OPERATING INSTRUCTIONS continued... Diagnostics Mode light, a buttonpad problem exists. After completing the Buttonpad Test, you will return to Diagnostics • To enter Diagnostics Mode, press and hold the Mode. (Press “CANCEL” at any time during the Program (lower right blank) button for three, (3), test to return to Diagnostics Mode.) seconds. When prompted, enter the code: 3-4-2- 4 using the buttons 1 – 0. Press “ENTER” (lower Door Switch Test right blank). 1. After selecting Door Swi
Summary of the content on the page No. 12
OPERATING INSTRUCTIONS continued... Fan Speed Test Moisture Test 1. After selecting Fan Speed Test and pressing 1. After selecting Moisture Test and pressing “ENTER” (lower right blank), the control will turn “ENTER”, the control will show the moisture the oven fan on LOW speed for ten seconds. Verify status as OFF for ten seconds. that the fan is indeed running on low speed. The control will show: 2. The control will then turn moisture on for ten seconds, verify that the moisture h
Summary of the content on the page No. 13
OPERATING INSTRUCTIONS continued... Temperature does not correspond to the pyrometer, • In the event of a temperature probe failure, the enter the value on the pyrometer using buttons 1 control will become inoperative and the display – 0. The value will be input as Set Temp. will show “PROBE ERROR”. Once the problem is corrected, the control must be cycled On/Off (using the ON/OFF button) in order to become operative again. 3. Press “ENTER” (lower right blank) to accept the changes. The A
Summary of the content on the page No. 14
CLEANING AND MAINTENANCE 1. The oven should be allowed to cool sufficiently Check Calibration before beginning the cleaning procedure. Tools: Digital thermometer with probe; oven mitt. 2. Wipe exposed cleanable surfaces when cool with See also, Temperature Calibration on page 12. a mild detergent and hot water. Stubborn residue spots may be removed with a lightweight non- 1. Clamp the probe in the center of the middle rack. metallic scouring pad. Dry thoroughly with a clean 2. Pass the prob
Summary of the content on the page No. 15
CLEANING AND MAINTENANCE Oven Cleaning Motor Care • The motor in this convection oven is maintenance Interior free since it is constructed with self-lubricating • NOTE: Disconnect the oven from the power supply sealed ball bearings. It is designed to provide durable before cleaning or servicing. service when treated with ordinary care. There are a few suggestions to follow on the care of the motor: • Establish a regular cleaning schedule. Any spills should be wiped off immediately. • When
Summary of the content on the page No. 16
