Dell OptiPlex 740 740-MT user manual

User manual for the device Dell OptiPlex 740 740-MT

Device: Dell OptiPlex 740 740-MT
Category: Personal Computer
Manufacturer: Dell
Size: 7.02 MB
Added : 5/4/2013
Number of pages: 217
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Dell OptiPlex 740 740-MT. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Dell OptiPlex 740 740-MT.

For your convenience

If looking through the Dell OptiPlex 740 740-MT user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Dell OptiPlex 740 740-MT on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Dell OptiPlex 740 740-MT to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Dell OptiPlex 740 740-MT User manual - Online PDF
Advertisement
« Page 1 of 217 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Dell OptiPlex 740 740-MT but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Dell OptiPlex 740 740-MT. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Dell™ OptiPlex™ 740 User's Guide
 
 Mini Tower Computer

 Desktop Computer

 Small Form Factor Computer

Back to Contents Page

Summary of the content on the page No. 2

Back to Contents Page   Advanced Features Dell™ OptiPlex™ 740 Systems User's Guide   LegacySelect Technology Control   Jumper Settings   Manageability   Clearing Forgotten Passwords   Security   Clearing CMOS Settings   Password Protection   HyperTransport™ and Dual-Core Technology   Trusted Platform Module (TPM)   Power Management   System Setup   About RAID Configurations   Booting to a USB Device   Enabling Cool 'n' Quiet™ Technology   LegacySelect Technology Contr

Summary of the content on the page No. 3

A managed system is one that has Dell OpenManage Client Instrumentation set up on a network that uses IT Assistant. For information about Dell OpenManage Client Instrumentation, see the Dell OpenManage Client Instrumentation User's Guide available on the Dell Support website at support.dell.com.  Security   Chassis Intrusion Detection NOTE: When the administrator password is enabled, you must know the administrator password before you can reset the Chassis Intrusion setting. This featur

Summary of the content on the page No. 4

NOTICE: If you leave your computer running and unattended without having a system password assigned, or if you leave your computer unlocked so that someone can disable the password by changing a jumper setting, anyone can access the data stored on your hard drive.   Option Settings You cannot change or enter a new system password if either of the following two options is displayed: l  Set — A system password is assigned. l  Disabled — The system password is disabled by a jumper setting

Summary of the content on the page No. 5

Deleting or Changing an Existing System Password   1. Enter system setup (see Entering System Setup).   2. Highlight System Password and press .   3. When prompted, type the system password.   4. Press twice to clear the existing system password. The setting changes to Not Set. If Not Set is displayed, the system password is deleted. If Not Set is not displayed, press , press the left- and right-arrow keys to highlight Save/Exit, and then press

Summary of the content on the page No. 6

To change an existing administrator password, you must know the administrator password.   1. Enter system setup (see Entering System Setup).   2. Type the administrator password at the prompt.   3. Highlight Admin Password and press the left- or right-arrow key to delete the existing administrator password. The setting changes to Not Set. To assign a new administrator password, perform the steps in Assigning an Administrator Password.   4. Exit system setup.   Disabling

Summary of the content on the page No. 7

l  To read the current amount of memory or set the type of hard drive installed Before you use system setup, it is recommended that you write down the system setup screen information for future reference.   Entering System Setup   1. Turn on (or restart) your computer.   2. When the blue DELL™ logo is displayed, you must watch for the F2 prompt to appear.    3. Once this F2 prompt appears, press immediately. NOTE: The F2 prompt indicates that the keyboard has initiali

Summary of the content on the page No. 8

( default)   NOTE: If USB is selected, ensure that USB Controller setup option under Onboard Devices is set to On. SATA 0 through Identifies and enables and disables the drives attached to the SATA connectors on the system board and SATA n lists the capacities for the hard drives.   NOTE: These options appear as SATA 0 through SATA 3 for the mini tower, SATA 0 through SATA 2 for the desktop, and SATA 0 and SATA1 for the small form factor. External SATA Identifies and enables and disab

Summary of the content on the page No. 9

selection only matters if there are two video controllers present. When Auto is selected, the add-in video controller will be used.   ( NOTE: A PCI Express graphics card will override the integrated video controller. Video Memory This setting configures the amount of system memory that is reserved for the integrated video controller. The settings are Auto, 16MB, 32MB, 64MB, 128MB, or Off. ( HDD Acoustic Mode ( default) l  Bypass — Your computer does not test or change the current

Summary of the content on the page No. 10

decrease the numbers, or type numbers in both the date and time fields. Low Power When Low Power Mode is selected, remote wakeup events will no longer power up the computer from Hibernate or Off via the onboard network controller. ( Remote This option allows the system to power up when a Network Interface Controller or Remote Wakeup-capable modem receives a wake up signal. - On is the default setting. On w/ Boot to NIC will allow the computer to attempt to boot from a network prior to

Summary of the content on the page No. 11

NOTE: To boot to a USB device, the device must be bootable. To ensure that a device is bootable, check the device documentation.   Changing Boot Sequence for Future Boots   1. Enter system setup (see Entering System Setup).   2. Use the left- and right-arrow keys to highlight the Boot menu option, then press to access the menu. NOTE: Write down your current boot sequence in case you want to restore it.   3. Press the up- and down-arrow keys to highlight the appropriate B

Summary of the content on the page No. 12

      Jumper Setting Description PSWD Password features are enabled (default setting). Password features are disabled.    jumpered    unjumpered  Clearing Forgotten Passwords   CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. NOTICE: This process erases both the system and administrator passwords.   1. Follow the procedures in Before You Begin.   2. If clearing the password on a small for

Summary of the content on the page No. 13

  15. Connect your computer and devices to electrical outlets, and turn them on. NOTE: This procedure enables the password feature. When you enter system setup, both system and administrator password options appear as Not Set—meaning that the password feature is enabled but no password is assigned (see Entering System Setup).   16. Assign a new system and/or administrator password.  Clearing CMOS Settings   CAUTION: Before you begin any of the procedures in this section, follow t

Summary of the content on the page No. 14

Sleep Mode Wake-Up Methods (Windows XP) Standby l  Press the power button l  Auto power on l  Move or click the mouse l  Type on the keyboard l  USB device activity l  Power management event Hibernate l  Press the power button l  Auto power on l  Power management event Shutdown l  Press the power button l  Auto power on l  Power management event NOTE: For more information on power management, see your operating system documentation.  About RAID Configurations NOTICE: In order to

Summary of the content on the page No. 15

NOTE: In a RAID level 0 configuration, the size of the configuration is equal to the size of the smallest drive multiplied by the number of drives in the configuration.   RAID Level 1 Configuration RAID level 1 uses a data-redundancy storage technique known as mirroring to enhance data integrity. When data is written to the primary drive, the data is also duplicated, or mirrored, on the second drive in the configuration. A RAID level 1 configuration sacrifices high data-access rates for its

Summary of the content on the page No. 16

  3. Press when prompted to enter the RAID BIOS. NOTE: If the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then shut down your computer and try again. The Define a New Array window appears.   4. Press to navigate to the RAID Mode field. To create a RAID 0 configuration, use the arrow keys to select Striping. To create a RAID 1 configuration, use the arrow keys to select Mirroring.   5. Press to navigate to the

Summary of the content on the page No. 17

  5. Click Custom, then click Next.   6. Use the drop-down box to select Striping (RAID 0) or Mirroring (RAID 1).   7. Click Next. The Free Disk Selection window appears. NOTE: Only RAID-enabled hard drives are listed as free disks.   8. Click to select the drives that will make up the RAID configuration, click Next, and then click Next again. NOTE: Your computer supports a maximum of two drives per RAID array. The Clearing System Data window appears. NOTICE: The Clea

Summary of the content on the page No. 18

The NVIDIA Convert Array Wizard appears.   4. Click Next.   5. Under RAID Mode Selection, select Mirroring or Striping from the drop-down menu.   6. Click Next. NOTICE: You will lose all data on the selected drives in the next step.   7. Under Free Disk Selection, select the hard drive(s) you want to include in the (migrated) array by clicking the checkbox beside it.   8. Click Finish. The MediaShield RAID management utility window appears and displays the status

Summary of the content on the page No. 19

Back to Contents Page   Battery Dell™ OptiPlex™ 740 Systems User's Guide   Replacing the Battery  Replacing the Battery   CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface on

Summary of the content on the page No. 20

1 system battery 2 positive side of battery connector 3 battery socket 4 battery socket tab         NOTICE: To avoid damage to the battery connector, you must firmly support the connector while replacing the battery.   6. Install the new system battery. a.  Support the battery connector by pressing down firmly on the positive side of the connector. b.  Hold the battery with the "+" facing up, and slide it under the securing tabs at the positive side of the connector. c.  Pres


Alternative user manuals
# User manual Category Download
1 Dell 1100 User manual Personal Computer 5
2 Dell 100L User manual Personal Computer 0
3 Dell 1300 User manual Personal Computer 5
4 Dell 1428 User manual Personal Computer 4
5 Dell 1500 User manual Personal Computer 9
6 Dell 1510 User manual Personal Computer 12
7 Dell 1310 User manual Personal Computer 0
8 Dell 1600SC User manual Personal Computer 4
9 Dell 160 User manual Personal Computer 2
10 Dell 160L User manual Personal Computer 0
11 Dell 170L User manual Personal Computer 4
12 Dell 1764 User manual Personal Computer 2
13 Dell 1710 User manual Personal Computer 0
14 Dell 2010 User manual Personal Computer 1
15 Dell 230S User manual Personal Computer 1
16 Sony PCG-R505TSK User manual Personal Computer 0
17 Sony PCG-V505DC2 User manual Personal Computer 2
18 Sony MX User manual Personal Computer 1
19 Sony PCV-L400 User manual Personal Computer 5
20 Sony PCG-V505DC1 User manual Personal Computer 2