Summary of the content on the page No. 1
PRIMERGY TX120 Server
Operating Manual
Edition July 2007
Summary of the content on the page No. 2
Comments… Suggestions… Corrections… The User Documentation Department would like to know your opinion of this manual. Your feedback helps us optimize our documentation to suit your individual needs. Feel free to send us your comments by e-mail to manuals@fujtsu-siemens.com. Certified documentation according to DIN EN ISO 9001:2000 To ensure a consistently high quality standard and user-friendliness, this documentation was created to meet the regulations of a quality management system which c
Summary of the content on the page No. 3
Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.1 Documentation overview . . . . . . . . . . . . . . . . . . . . 7 1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 15 1.4 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . 16 2 Installa
Summary of the content on the page No. 4
Contents 5 Starting up and operation . . . . . . . . . . . . . . . . . . . . 43 5.1 Opening the drive cover . . . . . . . . . . . . . . . . . . . . 43 5.2 Controls and displays . . . . . . . . . . . . . . . . . . . . . . 44 5.2.1 Front of server . . . . . . . . . . . . . . . . . . . . . . . . . . 44 5.2.2 Rear of server . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 5.3 Switc
Summary of the content on the page No. 5
Contents 8 Hot-plug hard disk drives . . . . . . . . . . . . . . . . . . . 61 8.1 Handling hard disk drives and HDD modules . . . . . . . . 62 8.2 Removing/Installing the dummy module . . . . . . . . . . . 63 8.3 Installing/Removing the HDD module . . . . . . . . . . . . . 64 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Literature . . . . . . . . . . . . . . . .
Summary of the content on the page No. 6
Summary of the content on the page No. 7
1 Introduction The PRIMERGY TX120 server is an Intel-based server for small and medium- sized networks and can be used in the horizontal position or as a desktop model. The PRIMERGY TX120 server features exceptionally low energy consumption, very quiet running and a compact size. As a result, it is also the ideal solution for home and small offices. Thanks to its highly developed hardware and software components, the PRIMERGY TX120 server offers a high level of data security and availability
Summary of the content on the page No. 8
Documentation overview Introduction Concept and target groups for this manual This operating manual describes how to install, set up and operate your server. This manual is intended for those people responsible for installing the hardware and ensuring that the system runs smoothly. The manual contains all the infor- mation required to install and operate your PRIMERGY TX120. A knowledge of hardware and data transmission, as well as basic knowledge of the operating system used, is necessary to
Summary of the content on the page No. 9
Introduction Documentation overview – “Integrated RAID for SAS User’s Guide” (PDF file available on the ServerBooks DVD supplied) – “ServerView RAID User Manual” (PDF file available on the ServerBooks DVD) – “Integrated Mirroring User’s Guide” (PDF file available on the ServerBooks DVD) Further sources of information: – Manual for the monitor – Manual on ServerView Server Management – Manual for the remote testing and diagnostic system RemoteView – Documentation for boards and drives – Documen
Summary of the content on the page No. 10
Features Introduction 1.2 Features System board The features of the system board are described in the technical manual for the system board D2550 for the hardware and in the “BIOS Setup” for the firmware (see “Literature” on page 77). Hard disk drives The server is equipped with a drive bay in which up to 2 SAS HDD modules can be inserted. Each HDD module can accommodate a SAS hard disk drive with a 2.5 inch format. The module is connected to the SAS backplane without cables via the SAS int
Summary of the content on the page No. 11
Introduction Features HDD expansion box and accessible drives Two mounting locations are available: – a 3.5-inch bay for an HDD expansion box or a backup drive. – a 5.25 inch bay with a slimline CD/DVD drive. The accessible drives cannot be replaced during operation. USB ports The USB ports on the front of the device enable USB devices to be connected directly. The maximum length of the external cable are three meters. Power supply The server has a built-in power supply unit, which automaticall
Summary of the content on the page No. 12
Features Introduction iRMC with integrated service LAN port I The features of the iRMC Advanced Video Redirection and Remote Storage are available as an option. The iRMC (integrated Remote Management Controller) is a BMC with integrated service LAN port and expanded functionality that was previously only available with additional plug-in cards. In this way, the iRMC enables complete control of PRIMERGY servers, regardless of system status, and thus particu- larly the control of PRIMERGY serv
Summary of the content on the page No. 13
Introduction Features Server Management Server Management is implemented using theServerView software supplied combined with PDA (Prefailure Detection and Analyzing) technology from Fujitsu Siemens Computers. PDA reports the threat of a system error or overload at an early stage, allowing preventive measures to be taken. ServerView enables the management of all PRIMERGY servers in the network via a central console. The following key functions and others are supported by ServerView: ● Round
Summary of the content on the page No. 14
Features Introduction Service and support PRIMERGY servers are service-friendly and modular, thus enabling quick and simple maintenance. The handles and locks (touch point) on the different hot pluggable components are colored green to ensure simple and immediate recognition. In order to avoid damage to components by incorrect handling when they are being installed and removed, green highlighting also identifies the areas of all components that can be touched without causing damage to the r
Summary of the content on the page No. 15
Introduction Notational conventions 1.3 Notational conventions The following notational conventions are used in this manual: Text in italics indicates commands, menu items or software programs. “Quotation marks” indicate names of chapters and terms that are being emphasized. Ê describes activities that must be performed in the order shown. V CAUTION! pay particular attention to texts marked with this symbol. Failure to observe this warning may endanger your life, destroy the system or lead t
Summary of the content on the page No. 16
Technical data Introduction 1.4 Technical data Electrical data Rated voltage range 100 V - 127 V or 200 V - 240 V Frequency 50 Hz - 60 Hz Rated current with basic configuration 100 V - 240 V / 1.63 A - 0.69 A Max. rated current 100 V - 240 V / 2.0 A - 1.0 A Effective power 163 W Apparent power 166 VA Heat dissipation 587 kJ/h (556 btu/h) Main power fuse 16 A Protection class I Compliance with regulations and standards Product safety and IEC 60950-1 / EN 60950-1, UL/CSA 60950-1, ergonomics CNS 1
Summary of the content on the page No. 17
Introduction Technical data Mechanical values Horizontal operating position Upright operating position Width 99 mm (195 mm with feet) 340 mm Depth 399 mm 399 mm Height 340 mm (360 mm with feet) 99 mm (104 mm with feet) Weight Approx. 10 kg (depending on configuration). Ventilation clearance At least 200 mm on the front and rear. Ambient conditions Environment class 3K2 EN 60721 / IEC 721 Part 3-3 Environment class 2K2 EN 60721 / IEC 721 Part 3-2 Temperature: Operation (3K2) 15 °C ... 35 °C Trans
Summary of the content on the page No. 18
Summary of the content on the page No. 19
2 Installation steps, overview This chapter contains an overview of the steps necessary to install your server. Links guide you to sections where you can find more detailed information on the individual steps: Ê First of all, it is essential that you familiarize yourself with the safety infor- mation in chapter “Important information” on page 21. Ê Transport the server to the place where you want to install it Ê Unpack all parts, check the contents of the package for visible transport damage
Summary of the content on the page No. 20
Installation steps, overview Ê Configure the server and install the desired operating system and applica- tions. The following options are available: – Remote configuration and installation with ServerStart: With the ServerStart Disc 1 provided, you can configure the server and install the operating system in a convenient manner. Details on how to operate ServerStart, as well as some additional infor- mation, can be found in the “PRIMERGY ServerView Suite - ServerStart” manual. Configuration
