Summary of the content on the page No. 1
Robust Panel PC APC-9172
APC-9172
®
Intel Core 2 Duo Processor
Industrial Panel PC
With 17” TFT LCD &
Two PCI expansion slots
APC-9172 Manual 2nd Ed.
Sept 2007
Summary of the content on the page No. 2
Robust Panel PC APC-9172 Copyright Notice This document is copyrighted, 2007. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. H
Summary of the content on the page No. 3
Robust Panel PC APC-9172 Acknowledgments ® ® ® Intel and Pentium are registered trademarks of Intel Corporation. IBM, PC/AT, PS/2 are trademarks of International Business Machines Corporation. ® Microsoft Windows is a registered trademark of Microsoft Corporation. All other product names or trademarks are properties of their respective owners. ii
Summary of the content on the page No. 4
Robust Panel PC APC-9172 Packing List Before you begin operating your PC, please make sure that the following materials have been shipped: 1 APC-9172 Robust Panel PC 2 Easy stand 1 Waterproof sponge 12 Panelmount clips & screws 1 Screw bag 1 CD-ROM for manual (in PDF format) and drivers If any of these items should be missing or damaged, please contact your distributor or sales representative immediately. iii
Summary of the content on the page No. 5
Robust Panel PC APC-9172 Safety & Warranty 1. Read these safety instructions carefully. 2. Keep this user's manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. 4. For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a firm surface during installation. D
Summary of the content on the page No. 6
Robust Panel PC APC-9172 d. The equipment does not work well, or you cannot get it to work according to the user’s manual. e. The equipment has been dropped and damaged. f. The equipment has obvious signs of breakage. 15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -20°C (-4°F) OR ABOVE 60°C (140°F). IT MAY DAMAGE THE EQUIPMENT. 16. External equipment intended for connection to signal input/output or other connectors, shall comply with
Summary of the content on the page No. 7
Robust Panel PC APC-9172 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Panel PC/ Workstation 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) 印刷电路板 × ○ ○ ○ ○ ○ 及其电子组件 外部信号 × ○ ○ ○ ○ ○ 连接器及线材 外壳 × ○ ○ ○ ○ ○ 中央处理器 × ○ ○ ○ ○ ○ 与内存 硬盘 × ○ ○ ○ ○ ○ 液晶模块 × ○ ○ ○ ○ ○ 光驱 × ○ ○ ○ ○ ○ 触控模块 × ○ ○ ○ ○ ○ 电源 × ○ ○ ○ ○ ○ O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求
Summary of the content on the page No. 8
Robust Panel PC APC-9172 Contents Chapter 1 General Information 1.1 Introduction................................................................ 1-2 1.2 Features .................................................................... 1-3 1.3 Specifications ............................................................ 1-4 1.4 Dimension ................................................................. 1-7 Chapter 2 Hardware Installation 2.1 Safety Precautions .............................
Summary of the content on the page No. 9
Robust Panel PC APC-9172 Appendix A I/O Information A.1 I/O Address Map....................................................A-2 A.2 Memory Address Map............................................A-3 A.3 IRQ Mapping Chart................................................A-4 A.4 DMA Channel Assignments...................................A-4 viii
Summary of the content on the page No. 10
Robust Panel PC APC-9172 Chapter 1 General Information Chapter 1 General Information 1- 1
Summary of the content on the page No. 11
Robust Panel PC APC-9172 1.1 Introduction APC-9172 is first Core 2 Duo industrial board in AAEON Panel PC product line. It features a PGA478 socket that can accommodate Core 2 Duo Processor, supporting FSB up to 400/533/667MHz. Best performance for multimedia solution AAEON's APC-9172 also supports DDR DRAM up to 2GB. It can provide the strong multimedia functions. Therefore APC-9172 can be broadly implemented in several markets, such as Point of sale, point of information (Kiosk), an
Summary of the content on the page No. 12
Robust Panel PC APC-9172 1.2 Features 17” TFT SXGA (1280 x 1024) LCD ® All-in-one SBC supports Socket 478 based Intel Core 2 Duo Processor Anti-vibration disk drive bay for HDD Water-proof and anti-scratch IP-65 certified aluminum front panel with USB port certification Two free PCI expansion slots Resistive TouchScreen (optional) Chapter 1 General Information 1- 3
Summary of the content on the page No. 13
Robust Panel PC APC-9172 1.3 Specifications System Construction Heavy-duty steel chassis & IP-65 certified aluminum front panel (or optional stainless steel front panel) ® CPU Socket 478 based Intel Core 2 Duo Processor up to 2.0G with FSB 400/533/667MHz ® LCD/CRT Intel 945GM, AGP 4X Controller System Memory DDRII SODIMM Socket x 1 up to 2G ® ® OS Support Windows 2000, Windows XP, ® Windows XP Embedded (Optional) Storage Disk Drive Anti-vibration 2.5”HDD, Slim FDD and Sli
Summary of the content on the page No. 14
Robust Panel PC APC-9172 (Type I/II), Secure Digital, Multi Media Card, Memory Stick (PRO) and Smart Media USB ports 4 USB 2.0 ports on rear panel; 1 USB 2.0 port on front panel (Lockable by BIOS) Because of USB chipset limitation, front USB port and Card reader USB interface are linked together, when user “disable” front USB port （USB Port 3 controller ）, the card reader must be forced to disable at the same time Power Supply Universal 250W switching power supply Mechanical
Summary of the content on the page No. 15
Robust Panel PC APC-9172 10 to 90% @35 °C, non-condensin Operating humidity Vibration 1.5G / 5~500Hz (Random/ operation) Shock 15G peak acceleration (11 msec. duration)/ operation EMC CE/FCC Class A Power Supply AC input 250W: Output rating: 250W Input voltage: 100VAC~240VAC@47~63Hz Output voltage: +3.3V@16A, +5V@25A, +12V@13A, +5VSB@2A, -5V@0.3A, -12V@0.8A LCD Specifications Display type 17” color TFT LCD Max. Resolution 1280 x 1024 Max. Colors 16.2M Dot size (mm)
Summary of the content on the page No. 16
Robust Panel PC APC-9172 TouchScreen (Optional) Type 8-wire, analog resistive Resolution 2048 x 2048 Light transmission >80% Lifetime 10 million activations OS support Windows 2000, Windows XP, Windows XP Embedded 1.4 Dimension Unit : mm APC-9172 Cutout Size : 449 X 367 Chapter 1 General Information 1- 7
Summary of the content on the page No. 17
Robust Panel PC APC-9172 Chapter 2 Hardware Installation Chapter 2 Hardware Installation 2-1
Summary of the content on the page No. 18
Robust Panel PC APC-9172 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components. Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times. Place all electronic comp
Summary of the content on the page No. 19
Robust Panel PC APC-9172 2.2 COM1~4 RS-232/422/485 Serial Port Connector (CN16) 5 1 9 6 COM 4 is reserved for touch screen. Pin Signal Pin Signal 1 DCD1 2 DSR1 3 RXD1 4 RTS1 5 TXD1 6 CTS1 7 DTR1 8 RI1 9 GND Chapter 2 Hardware Installation 2 - 3
Summary of the content on the page No. 20
Robust Panel PC APC-9172 2.3 HDD Installation Step 1: Screw up the HDD onto HDD Bracket Step 2: Fasten the 4 pieces of anti- vibration Rubbers on the HDD bracket. Step 3: Screw two brackets with four screws to fasten Anti-vibration Rubbers. Chapter 2 Hardware Installation 2 - 4
