Summary of the content on the page No. 1
®
AP110
®
Pentium III IDE RAID Server
User’s Manual
Summary of the content on the page No. 2
Checklist Disclaimer/Copyrights No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
Summary of the content on the page No. 3
Contents Disclaimer/Copyrights ....................................................... 2 ASUS Contact Information ................................................ 6 FCC/CDC Statements ........................................................ 7 Safety Precautions ............................................................. 8 Introduction: About This Manual .......................... 9 Audience ........................................................................... 10 Contents ................
Summary of the content on the page No. 4
Contents 2.5 Install System Memory ............................................ 26 DIMM Sockets Location ............................................. 26 Install a DIMM ............................................................ 26 2.6 Install a Hard Disk Drive .......................................... 27 HDD Metal Cage ........................................................ 27 Remove the HDD Cage ............................................. 27 Install the HDD ...............................
Summary of the content on the page No. 5
Contents Appendix A: Power Supply ................................. 43 A.1 General Description ................................................. 44 A.2 Specifications .......................................................... 45 Input Characteristics .................................................. 45 Output Characteristics ............................................... 45 Over-Voltage Protection (OVP) .................................. 45 Appendix B: Troubleshooting .........................
Summary of the content on the page No. 6
ASUS Contact Information ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Address: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 Telephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw Technical Support Tel (English): +886-2-2890-7123 Tel (Chinese): +886-2-2890-7113 Fax: +886-2-2893-7775 Email: tsd@asus.com.tw Newsgroup: news2.asus.com.tw WWW: www.asus.com.tw FTP: ftp.asus.com.tw/pub/ASUS ASUS COMPUTER INTERNATIONAL (America) Marketing Address: 6737 Mowry Avenue, Mowry Business Cent
Summary of the content on the page No. 7
FCC/CDC Statements Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide r
Summary of the content on the page No. 8
Safet y Precautions Electrical Safety IMPORTANT • Before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged. • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing any additional devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect
Summary of the content on the page No. 9
Introduction “About This Manual” introduces the contents of this document. This part includes the target audience, chapter description, and conventions used. It also lists other sources of information that are not contained in this manual. AP110 Server User’s Manual 9 About This Manual
Summary of the content on the page No. 10
Audience This installation guide is intended for system integrators, and experienced users with at least basic knowledge of configuring an entry-level server. Contents This manual contains the following parts: 1. Introduction: About This Manual This part introduces the contents of this document. It includes the target audience, chapter description, and conventions used. It also lists other sources of information that are not contained in this manual. 2. Chapter 1: System Overview This chapter de
Summary of the content on the page No. 11
Conventions Symbols To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Information that you MUST follow to complete a task. NOTE: Tips and information to aid in completing a task. References Refer to the following sources for additional information a
Summary of the content on the page No. 12
System Package Contents The following checklist enumerates the components included in the standard system package. 1) ASUS AS-15 Chassis 2) ASUS CUV-2LV Motherboard 3) 250W ATX Power Supply 4) 50X CD-ROM Drive 5) 1.44MB Floppy Disk Drive 6) Support CD with Drivers and Utilities 7) User’s Manuals (for system and motherboard) 8) ASUS System Management Agent (ASMA) Support CD If any of the above items is missing, contact your dealer. 12 Introduction: About This Manual
Summary of the content on the page No. 13
Chapter 1 This chapter describes the general features of the AP110 server. It includes sections on front panel, rear panel, and internal features of the server. AP110 Server User’s Manual 13 System Overview
Summary of the content on the page No. 14
1.1 System Features The ASUS AP110 Server is a stylish tower chassis that accommodates ® the ASUS CUV-2LV motherboard. The server is powered by Intel ® Pentium III/Celeron™ processor, and supports the latest I/O, audio, and video technologies through the chipsets embedded on the motherboard. Following are highlights of the server’s many features. • Processor: Support for Intel Pentium III/Celeron processor running up to over 1GHz • Memory: Three DIMM sockets that support Intel PC133/PC100- compl
Summary of the content on the page No. 15
1.2 Front Panel Features The AP110 front panel is designed with a door on the upper part secured by a keylock. When locked, the door provides security to the hot-swap IDE drives and other internal components because neither the front panel nor the chassis cover cannot be removed. When the door is open, you can easily access the hot-swap IDE drives (if available), floppy disk drive, and CD-ROM drive. Chassis Keylock Front Panel Door Floppy Disk Drive Power LED IDE HDD LED Hot-Swap IDE Drives (opt
Summary of the content on the page No. 16
1.3 Rear Panel Features The AP110 rear panel includes the external I/O ports. The following picture shows the cable connectors and the devices that you connect to the ports. AC Power PS/2 KB PS/2 Mouse USB Serial Parallel VGA RJ-45 Voltage Selector The switching power supply that came with the server has a voltage selector switch below the power socket. Use this switch to select the appropriate voltage according to the voltage supply in your area. If the voltage supply in your area is 100-127V,
Summary of the content on the page No. 17
1.4 Internal Features The standard components inside the AP110 server include the motherboard, power supply, floppy and CD-ROM drives, and cables. The picture below shows the standard components and the optional IDE RAID kit that consists of hot-swap drive tray sets, IDE RAID card, and IDE cables. 1 2 3 4 8 5 7 6 1. Power Supply 2. Floppy Disk Drive 3. Hot-swap Drive Trays (optional) 4. CD-ROM Drive 5. 3.5-inch Internal Device Bays 6. IDE Cables for Hot-swap Drives (optional) 7. IDE RAID
Summary of the content on the page No. 18
18 Chapter 1: System Overview
Summary of the content on the page No. 19
Chapter 2 This chapter describes the hardware setup procedures that you have to perform when installing system components. AP110 Server User’s Manual 19 Hardware Setup
Summary of the content on the page No. 20
2.1 Remove the Front Cover Follow these steps to remove the front panel. Unlock the Front Panel Insert the system key to the keylock and turn it 90 degrees counter clockwise to unlock the front panel cover. Chassis Keylock Remove the Screws Front Panel Screws Use a Phillips screwdriver to remove the two screws that secure the front panel to the main chassis. Remove the Panel 1. Close the panel door. 2. Place your hands on the upper part of the panel and pull it firmly. 20 Chapter 2: Hardware Se
