Summary of the content on the page No. 1
CC330
Digital Camera
User Manual
Summary of the content on the page No. 2
ii
Summary of the content on the page No. 3
WARNING Do not expose the camera or other accessories to rain or humidity to prevent fire hazard or electric shock. For customers in the U.S.A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For c
Summary of the content on the page No. 4
SAFETY PRECAUTIONS Camera notes: Do not store or use the camera in the following types of locations: • In the rain, very humid and dusty places. • In a place where the camera can be exposed directly to the sunlight or subject to high temperature, e.g. Inside a closed car in summer. • In a place where the camera is subject to a high magnetic field, e.g. near motors, transformers or magnets. Do not place the camera on a wet surface or places where dripping water or sand may come in contact with t
Summary of the content on the page No. 5
BEFORE YOU START Preface Thank you for purchasing this HP digital camera. Please read this manual carefully and keep it in a safe place for future reference. Copyright © Copyright 2011 Hewlett Packard All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form, by any means, without the prior written permission of Hewlett Packard. Trademarks All trademarks mentioned
Summary of the content on the page No. 6
LCD Screen notes: Extremely high-precision technology had been used to manufacture the LCD screen so that most of the pixels are operational for use. However, there may be some minute points (black, white, red, blue or green) that constantly appear on the LCD screen. These points are normal in the manufacturing process and the recording is not affected in any way. Avoid exposing the LCD screen to water; please remove any moisture on the LCD screen with dry and soft cleaning cloth. If the LCD
Summary of the content on the page No. 7
CONTENTS WARNING ............................................................................................ SAFETY PRECAUTIONS .....................................................................2 BEFORE YOU START .........................................................................3 Preface ......................................................................................................................................... 3 Copyright ............................................
Summary of the content on the page No. 8
Flash ....................................................................................................................................... Self-timer ................................................................................................................................. Macro Mode ............................................................................................................................ Exposure Compensation ........................................
Summary of the content on the page No. 9
Gathering ................................................................................................................................. 21 ID ............................................................................................................................................. 21 Fish eye ................................................................................................................................... 21 Travel shooting .........................................
Summary of the content on the page No. 10
Protect .................................................................................................................................... 28 Delete ..................................................................................................................................... 29 DPOF (Digital Print Order Format) ......................................................................................... 29 Trim ....................................................................
Summary of the content on the page No. 11
Connecting to a PictBridge Compatible Printer .......................................................................... 3 Setting the USB Mode ............................................................................................................ 3 Connecting the Camera and Printer ....................................................................................... 3 Using the PictBridge Menu ....................................................................................
Summary of the content on the page No. 12
GETTING READY Unpacking Your package should contain the camera model you purchased along with the following items. If anything is missing or appears to be damaged, please contact your vendor. AA-size Alkaline Batteries Warranty Card CD-ROM USB Cable Wrist Strap Camera Views Front View 1 2 3 1. Flash Lamp 2. Timer Indicator 3. Lens 4. Microphone 4 0 0
Summary of the content on the page No. 13
Back View 5. LCD Screen 5 6 7 6. Status Indicator 7. Zoom Toggle 8 8. Playback Button 9. Menu Button 9 10. Mode Selection Button 11. Display/Up Button 10 12. Flash Mode/Right Button 11 15 13. Delete Button/Down Button 14 12 14. Face Detection/Left button 13 15. Function/OK Button Left / Right View 16. USB/AV Port 16 17. Wrist Strap 17 Top / Bottom View 18. Shutter Button 18 19. Power Button 20. Speaker 20 19 21. Card Slot/Battery Compartment 22. Tripod Socket 21 22 0 0
Summary of the content on the page No. 14
Insert the Battery and SD/SDHC Card (Not included) 1. Open the battery compartment. 2. Insert the enclosed batteries into the battery slot in the correct direction. 3. Insert an SD/SDHC card (not included) into the memory card slot as shown. 4. Close the battery compartment. Optional SD/SDHC cards are not included. The use of 64MB to16 GB memory cards from recognized manufacturers such as SanDisk, Panasonic and HP is recommended for reliable data storage. To remove the SD/SDHC card, open th
Summary of the content on the page No. 15
Turning On and Off Press the Power button to turn the camera on. To turn off the camera, press the Power button again. Power Button When the camera is turned on, it will be at the same shooting mode based on the last use. You can press the Mode button to select a different one after it is on. When using the camera for the first-time, the language setting page will appear. See next page for Language setting process. Using the Mode Button The HP camera provides a convenient Mode Button that all
Summary of the content on the page No. 16
Setting Date/Time and Language The Date/Time and Language setup will automatically appear when the camera is turned on the first time. To set the language, date, and time, go to the following setup options in the Setup menu. • Language • Date / Time To access the Setup menu, do the following: 1. Press Power to turn the camera on. 2. Press the button, switch among the setting menus by using the Left/Right button to select the corresponding basic setting menu . Setting the Language 1. Use th
Summary of the content on the page No. 17
BASIC OPERATION Shooting in Auto Mode Auto mode is the easiest mode to take photos. While operating in this mode, the camera automatically optimizes your photos for best results. To start shooting, do the following: 1. Press Power to turn the camera on. 2. In the Mode menu, select the Auto mode ( ). 3. Compose your picture on the LCD screen and press the Shutter button halfway to focus on the subject. 4. The LCD screen will show a green focus frame after the subject is in focus. 5. Press Shutt
Summary of the content on the page No. 18
3. Press button to confirm the settings and exit the menu, or press Down button to enter the selection screen of Basic Function. 4. Press Left/Right button to select the basic functions required to set, press Up button to enter the setting screen for selecting basic functions, or press button to confirm the settings and exit the screen. Flash Mode Name Icon Description Flash : Auto Camera flash goes off automatically based on existing light conditions. The camera exposes a brief fl
Summary of the content on the page No. 19
Advanced Functions Menu The Advanced Functions Menu of the camera include Image Size, Image Quality, White Balance, Image Color and ISO etc. The suitable function setting can let you shoot better photos and videos. Set the advanced functions as per the following steps: 1. Pull up the Advanced Function Menus by pressing button. 2. Press Left/Right button to select the settings of the required function. 3. Press button to confirm the settings and exit the menu, or press Down button to enter
Summary of the content on the page No. 20
WB (White Balance) The White Balance allows you to adjust the color temperature under different light source to ensure faithful color reproduction. The options of White Balance include: WB : Auto (default setting) WB : Daylight WB : Cloudy WB : Fluorescent WB : Fluorescent CWF WB : Incandescent WB : Manual (Press the shutter button to set WB) Color The color setting allows you to add artistic effects directly when taking pictures. You can try different color tones to alter the mood of your pi
