Music Hall Cruise Control 2.0 Selectable 33/45 RPM Outboard Control Cruise Control 2.0 user manual

Summary of the content on the page No. 1

music hall
cruise control 2.0
INSTRUCTION MANUAL
music hall
http://www.musichallaudio.com

Summary of the content on the page No. 2

CONGRATULATIONS ON YOUR PURCHASE You have selected an exceptional electronic speed control. Each component used in the construction of the cruise control 2.0 was selected to provide you with superior performance and the highest level of sound reproduction available today. We know of no electronic speed control that costs as much to produce yet sells for so little. The precise and elegant design of this electronic speed control makes it easy to install and operate. Please take a few moments to re

Summary of the content on the page No. 3

5. Climate The electronic speed control has been designed for use in moderate climates. Do not attempt to use below 41 degrees Fahrenheit (5 degrees Celsius) or above 95 degrees Fahrenheit (35 degrees Celsius). 6. Racks and Stands Place the electronic speed control on a fixed, level surface strong enough to support its weight. Do not place it on a moveable cart that could tip over. We recommend only using stands approved for use with audio equipment. 7. Cleaning A soft towel can be used. 8. Powe

Summary of the content on the page No. 4

GETTING STARTED Thank you for purchasing the Music Hall cruise control 2.0 electronic speed control. This manual provides valuable information that will help you get optimum performance from your system. Please contact your authorized Music Hall dealer for any additional clarifications you may require. Save the shipping carton and all enclosed packing material for future use. Shipping or moving the cruise control 2.0 in anything other than the original packing material may result in severe damag

Summary of the content on the page No. 5

1. Connect one end of the small cable supplied to the female receptacle on the back of the cruise control labeled OUTPUT ~16V 3W. 2. Connect the other end of the small cable supplied to the motor power supply housing (on the bottom back or side of the turntable). Connect the small male end of the cable attached to the wall wart power supply to the female input on back of the cruise control labeled INPUT ~16V 1A. 3. Move the belt to the larger 45rpm motor pulley position. 4. Plug the AC end of th

Summary of the content on the page No. 6

PITCH CONTROL Repeatedly press the (-) slower or (+) faster buttons to decrease or increase the replay speed in twenty steps of 0.1rpm respectively. SWITCHING ON AND OFF Pressing the power switch on your music hall turntable alternately starts or stops the motor. 78 RPM REPLAY In order to replay records at 78 rpm your turntable must be equipped with the appropriate 78 rpm pulley. This pulley is available as an optional accessory. After fitting the 78 rpm pulley proceed as follows: Remove the pla

Summary of the content on the page No. 7

SERVICE Should you encounter a problem that you cannot solve, please contact your Music Hall dealer. Never return a cruise control without authorization and without safely disconnecting it and correctly packing it in the original packaging. Repairs will only be made under warranty if the unit is returned correctly packaged in its original box. WARRANTY This entitles you to have the Music Hall cruise control 2.0 repaired free of charge, at our discretion, for one year after the date of purchase,

Summary of the content on the page No. 8

FOR FURTHER INFORMATION CONTACT: Music Hall 108 Station Road Great Neck, NY 11023 Tel: 516-487-3663 Fax: 516-773-3891 http://www.musichallaudio.com