Antec TPII-550 user manual

Summary of the content on the page No. 1

power
redefined
User’s Manual
Manuel de l’utilisateur / Anwenderhandbuch
Manuale per l’operatore / Manual del usuario

Summary of the content on the page No. 2

Antec TruePower 2.0 User's Manual ATX12V version 2.0 power supply Models: TPII-380, TPII-430, TPII-480, TPII-550, TPII-480Blue, TrueControl II-550 TruePower 2.0 series power supplies comply with the newest ATX12V version 2.0 specifications. This includes dual 12V output circuitry that delivers safer and more reliable output to your system's components, as well as higher energy efficiency, which reduces power consumption by up to 25%, saving you money on your electricity bill. In addition we've i

Summary of the content on the page No. 3

equipped with a soft on/off feature which turns your computer on and off through the soft switch on your computer case. You may need to turn the switch to the OFF position occasionally should your computer crash and you cannot shut it down using the soft switch. Installation: 1. Disconnect the power cord from your old power supply. 2. Open your computer case. Follow the directions provided in your case manual. 3. Disconnect all power connectors from the motherboard and from the peripherals devic

Summary of the content on the page No. 4

To measure the +12V1, +12V2, +5V and +3.3V outputs: 1. Set the measuring dial of your meter to VDC. Choose a maximum measuring range of +20VDC or higher. 2. To measure the +12V1 output: Use a 4-pin Molex connector from the power supply and insert the positive pole (red) to the connector pin with the yellow wire. Insert the negative (black) to one of the connector pins with a black ground wire. 3. To measure the +12V2 output: Use the 4-pin +12V CPU Power connector from the power supply and ins

Summary of the content on the page No. 5

Using TrueControl II-550: 1. The default voltages are set at +12V, +5V, and +3.3V. Turn the knob clockwise to increase output voltage and counterclockwise to decrease output voltage. The range within which you can adjust the voltage is ±5% of the specified output voltage (see Table 1). Note: Changing the output settings does not affect the voltage feedback circuitry, so if for example you set your +5V output to +5.2V, the power supply voltage feedback will operate to keep the +5V output as c

Summary of the content on the page No. 6

Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 Tel: 510-770-1200 Fax: 510-770-1288 Antec Europe B.V. Sydneystraat 33 3047 BP Rotterdam The Netherlands Tel: +31 (0) 10 462-2060 Fax: +31 (0) 10 437-1752 Customer Support US & Canada 1-800-22ANTEC CustomerSupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.com © Copyright 2005 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners. Reproduction in whole or in part without writte