Tripp Lite SMART700USB user manual

Summary of the content on the page No. 1

Tripp Lite

1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SMART700USB
SmartPro USB UPS System - Intelligent, line-interactive battery backup for workstations
Highlights
700VA line interactive tower UPS system
Enhanced communications via USB port, free PowerAlert softare and cabling
Corrects brownouts as low as 83V
6 outlets (3 UPS / 3 Surge-only)
Single line TEL/DSL or ethernet line surge suppression
$200,000 Ultimate Lifetime In

Summary of the content on the page No. 2

USB port enables unattended shutdown without data loss during extended power failures, includes USB cable Built-in USB port supports on battery, low battery, power restored, AC line voltage, DC battery voltage and battery capacity messaging; interface supports timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment PowerAlert UPS monitoring and unattended shutdown software available via free download from www.tripplite.com Supports Tripp L

Summary of the content on the page No. 3

Voltage regulation Line interactive voltage regulation corrects brownouts as low as 83V back to 120V nominal values description Brownout correction Input voltages between 83 and 105 are boosted by 14% Direct pass through Voltages of 106V and greater are passed through to connected equipment unchanged LEDS ALARMS & SWITCHES Alarms Audible alarm with 15 second delay sounds to indicate loss of utility power. Alarm can be silenced by pressing front panel alarm cancel button. Once silenced, alarm wil

Summary of the content on the page No. 4

Software and cabling USB cabling included, PowerAlert software available for free download at www.tripplite.com included LINE / BATTERY TRANSFER Transfer time from 2-4 milliseconds line power to battery mode Low voltage transfer Switches to battery power as line voltage decreases to 83 volts or less. Resets to line power mode as line voltage to battery power increases to 87V or higher. High voltage transfer Switches to battery power as line voltage increases to 147 volts or higher. Resets to lin