Summary of the content on the page No. 1
1
AXIS 1650 User’s Manual
AXIS 1650 User’s Manual
The Network Print Server for Canon Printers and
Multifunctional Products
* Including support for the host-based printing methods
Canon Advanced Printing Technology
Canon Advanced Raster Printing System
and other printer types such as Canon BubbleJet
Summary of the content on the page No. 2
Safety Notices AXIS 1650 User’s Manual 2 Safety Notices Take some time to read through the safety notices before installing the print server. Please observe all safety markings and instructions when using this product. Important: Observe “Important:” in the text to avoid operational impairment. Do not proceed until you have fully understood the implications. Electromagnetic Compatibility (EMC) USA This equipment has been tested and found to comply with the limits for a Class B digital devi
Summary of the content on the page No. 3
3 AXIS 1650 User’s Manual Safety Notices Liability Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please inform your local Axis office, which can be found on the cover of this document. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to t
Summary of the content on the page No. 4
AXIS 1650 User’s Manual 4 Table of Contents About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 About Axis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Section 1 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package C
Summary of the content on the page No. 5
5 AXIS 1650 User’s Manual Preface Thank you for purchasing the AXIS 1650. This product has been developed to connect your printer anywhere in your network, allowing all network users access to shared printer resources. About this Manual This manual is applicable for the AXIS 1650 print server with firmware version 1.00 or later, providing introductory information as well as detailed instructions on how to set up and manage the print server in various network environments. It is intended fo
Summary of the content on the page No. 6
AXIS 1650 User’s Manual 6 Support Services Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your Axis reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can: • Download user documentation and firmware updates • Find answers to previously resolved problems in the FAQ database. Search by product, category or phrase • Report p
Summary of the content on the page No. 7
7 AXIS 1650 User’s Manual Product Overview Section 1 Product Overview Package Contents Hardware Model Model/ Part Number 0214-001- XX Network Print Server AXIS 1650 With firmware version 1.00 or higher Adhesive Holder & Clip ACC AXIS CLIPS K 20119 70 cm, 28 inches USB Cable USB cable supports USB Low-Speed and 20208 Full-Speed. Hi-Speed is not supported. Model PS-H Part No. Australia 19111 Europe 19108 Power Adapter UK 19109 Japan 19110 USA (120V) 19110 USA (230V) 19108 Network cable RJ 45 S
Summary of the content on the page No. 8
Product Overview AXIS 1650 User’s Manual 8 The AXIS 1650 Network Print Server Parallel printer port (LPT1) Test button Network indicator Ethernet connector USB Printer Port (USB1) Power adapter Power indicator connector Supported Printers AXIS 1650 is developed to network Canon printers and multifunctional products. AXIS 1650 supports host-based printing methods such as Canon Advanced Printing Technology, Canon Advanced Raster Printing System and other printer types such as Canon BubbleJet
Summary of the content on the page No. 9
9 AXIS 1650 User’s Manual Product Overview Installation and Integration The installation of the AXIS 1650 and its integration into the network is performed using one of these software combinations: • AXIS IP JumpStarter (for IP setting) and then AXIS CAPT Print Monitor (for printer installation) •Canon NetSpot Device Installer (for IP setting) and then AXIS CAPT Print Monitor (for printer installation) • AXIS IP JumpStarter and AXIS CAPT Print Monitor are available free of charge from the
Summary of the content on the page No. 10
Product Overview AXIS 1650 User’s Manual 10 Future proof: You can upgrade the AXIS 1650 Flash memory over the network. This allows you to quickly update and enhance the operational features of your AXIS 1650 when new print server software becomes available. Printer Ports • One Low and -Full speed USB 1.1 port that also works with USB 2.0. Hi-Speed is not supported. • One high-speed IEEE 1284 compatible parallel port that plugs directly into the printer´s parallel port. AXIS 1650 is featur
Summary of the content on the page No. 11
11 AXIS 1650 User’s Manual Print Server Installation Section 2 Print Server Installation Follow these steps to install and configure your AXIS 1650: 1. Connect the Hardware, on page 11 2. Set the IP Address, on page 13 3. Windows Installation, on page 22 1. Connect the Hardware Parallel printer port (LPT1) Test button Network indicator Ethernet connector USB Printer Port (USB1) Power adapter Power indicator connector Backside label of print server The print server’s Mac/Ethernet address is b
Summary of the content on the page No. 12
Print Server Installation AXIS 1650 User’s Manual 12 1. Make sure that your printer is switched off and that the print server’s power adapter is disconnected. 2. Locate the serial number, found on the underside label of the print server, and write it down. You will need this number to configure the print server. 3. Either connect the printer to the USB port using the USB cable, or connect the printer directly to the LPT port or use a printer cable. AXIS 1650 is featured with two ports for
Summary of the content on the page No. 13
13 AXIS 1650 User’s Manual Print Server Installation 2. Set the IP Address • Before setting the IP address, make a note of the print server’s serial number (S/N), located on its backside label. See Backside label of print server, on page 11. • You should obtain an unused IP address from your network administrator. Method Platform Comment Axis software that allows you to find print servers in your network AXIS IP JumpStarter and assign an IP address to them. Windows software See Set a Sta
Summary of the content on the page No. 14
Print Server Installation AXIS 1650 User’s Manual 14 Set a Static IP Address using AXIS IP JumpStarter AXIS IP JumpStarter is an application that helps you to locate your Axis print server on the network and assign an IP address to it. 1. Install AXIS IP JumpStarter, it is available on the AXIS 1650 CD and on www.axis.com 2. Select a print server from the serial number list. All AXIS 1650 appear with the default IP address 192.168.0.90. If you are installing several AXIS 1650, check the Ser
Summary of the content on the page No. 15
15 AXIS 1650 User’s Manual Print Server Installation 4. Click the radio button that corresponds to your choice of IP setting method (static or dynamic using DHCP). When assigning a static IP address you also have to define the Subnet Mask and Default Gateway. 5. Click OK to save your settings. 6. You may be prompted to enter the server root password (by default set to ), click OK and the print server will appear in the list with the assigned IP address. 7. To verify that you have ac
Summary of the content on the page No. 16
Print Server Installation AXIS 1650 User’s Manual 16 Set a Static IP Address using ARP in Windows 98/Me/2000/XP/2003 1. Open a Command Prompt and type: arp -s ping -l 479 Example: arp -s 192.168.3.191 00-40-8c-18-1c-f0 ping -l 479 192.168.3.191 2. If the host returns Reply from 192.168.3.191 ... or a similar message, the IP address has been set successfully. If the host returns Request time out... you need to reboot the print server and perform
Summary of the content on the page No. 17
17 AXIS 1650 User’s Manual Print Server Installation Set a Static IP Address using ARP in UNIX Follow the instructions below to set the IP address using ARP. 1. Type the following commands in the shell window: arp -s temp ping -s 479 Example: arp -s 192.168.3.191 00:40:8c:18:1c:f0 temp ping -s 479 192.168.3.191 2. The host will return 192.168.3.191 is alive or a similar message. This indicates that the address has been set and that the communi
Summary of the content on the page No. 18
Print Server Installation AXIS 1650 User’s Manual 18 Set an IP Address with NetSpot Device Installer software NetSpot Device Installer is software from Canon that allows you to assign an IP address and manage Canon devices connected to your network. NetSpot Device Installer software is supplied on CD-ROM with your Canon printer and on www.canon.com Depending on the provided CD-ROM, NetSpot Device Installer may not be included. If this is the case, please download NetSpot Device Installer f
Summary of the content on the page No. 19
19 AXIS 1650 User’s Manual Print Server Installation Set the IP address using NetSpot Device Installer Follow these instructions to set the IP address using NetSpot Device Installer: 1. Start the program. The main window will open. After a while a list of devices detected on the network will be displayed. 2. Select the AXIS 1650 that displays the unit’s MAC address and default IP address 196.168.0.90 The MAC address is based on the Serial Number (S/N) of your AXIS 1650 and is printed on the
Summary of the content on the page No. 20
Print Server Installation AXIS 1650 User’s Manual 20 5. Next, configure the TCP/IP protocol: Select Manual Setting Enter IP Address Enter Gateway Address Enter Subnet Mask The Broadcast Address is filled in automatically 6. After you have finished the configuration, click OK. If you get a message reading “Resetting device”, click OK. 7. Click OK. Your printer’s protocol configuration is now finished and your AXIS 1650 has received an IP address. Continue to Windows Installation, on p
