Summary of the content on the page No. 1
Table of Contents
Table of Contents ......................................................................................... 1
Usage Notice ................................................................................................ 2
Precautions ..........................................................................................................2
Introduction .................................................................................................. 4
Product Features .........
Summary of the content on the page No. 2
Usage Notice Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. Warning- To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Warning- Please do not open or disassemble the product as this may cause electric shock. Warning- When changing the lamp, please allow unit
Summary of the content on the page No. 3
Usage Notice Do: Turn off the product before cleaning. Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don’t: Block the slots and openings on the unit provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: - In extremely hot, cold or humid environments. - In
Summary of the content on the page No. 4
Introduction Product Features TM This product is an SVGA single chip 0.55” DLP projector. Outstanding features include: True SVGA, 800 x 600 addressable pixels TM Single chip DLP technology NTSC3.58/NTSC4.43/PAL/SECAM and HDTV compatible (480i/p, 576i/p, 720p, 1080i) High-tech DVI connection for digital signal with HDCP function and supports 480p, 576p, 720p and 1080i (Optional) Full function remote control with laser pointer User friendly multilingual on scr
Summary of the content on the page No. 5
Introduction Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Projector with lens cap Power Cord 1.8m VGA Cable 1.8m Composite Video Cable USB Cable 1.8m S-Video Cable 1.8m 2.0m Audio Cable Jack /Jack VGA to Component/ Remote Control with 1.8m HDTV Adapter Laser Pointer Carrying Case User’s Guide 2 x Battery Quick Start Card 5 ... English
Summary of the content on the page No. 6
Introduction Product Overview Main Unit 2 1 3 8 6 The color of the projector 5 4 cover in this menu is for reference 9 only. The color of real product is subject to change depending on marketing announcement. 2 6 7 1. Focus Ring 2. Zoom Ring 3. Zoom Lens 4. Elevator Button 5. Elevator Foot 6. Remote Control Receiver 7. Connection Ports 8. Power Socket 9. Control Panel English ... 6
Summary of the content on the page No. 7
Introduction Control Panel 4 5 7 3 1 2 6 1. Lamp Indicator LED 2. Temp Indicator LED 3. Power/Standby and Indicator LED (Power LED) 4. Source 5. Resync 6. Four Directional Select Keys 7. Menu 7 ... English
Summary of the content on the page No. 8
Introduction Connection Ports 1 2 3 4 5 6 7 PD100 10 9 8 1. DVI Input Connector (for Digital singal with HDCP function) (Op- tional) 2. PC Analog Signal/HDTV/Component Video Input Connector 3. Audio Input Connector 4. S-Video Input Connector 5. Monitor Loop-through Output Connector (VGA-Out) 6. USB Connector 7. Remote Control IR Receiver 8. Composite Video Input Connector TM 9. Kensington Lock Port 10. 5V DC Output Jack (for attached dongle device) (for PD100 only) English ... 8
Summary of the content on the page No. 9
Introduction Remote Control with Laser Pointer 16 1 3 2 5 4 8 10 6 11 7 9 12 14 15 13 1. Transmit Indicator Light 12. Resync 2. Power 13. Hide 3. Empowering Key 14. Source 4. Menu 15. Freeze 5. Four Directional Select Keys 16. Laser Pointer 6. Laser Button 7. Digital Zoom 8. Keystone + 9. Keystone - 10. Page Up 11. Page Down 9 ... English
Summary of the content on the page No. 10
Installation Connecting the Projector 1 USB S-Video Output DVI RGB 4 2 6 8 PD100 9 5 DVD Player, Settop Box, HDTV receiver 3 Video Output 7 1. ....................................................................................................................Power Cord 2. ..................................................................................................................... VGA Cable 3. ...............................................................................................
Summary of the content on the page No. 11
Installation Powering On/Off the Projector Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will flash red. 3. Turn on the lamp by pressing “Power/Standby” button on the control panel.And the Power LED will turn blue. 4. Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. If the screen displays “No Signal”, please make sure the signal cabl
Summary of the content on the page No. 12
Installation Powering Off the Projector 1. Press the “Power/Standby” button to turn off the projector lamp, you will see a message “Please press power button again to com- plete the shutdown process. Warning: DO NOT unplug while the projector fan is still running.” displayed on the projector’s screen. Press the “Power/Standby” button again to confirm, otherwise the message will disappear after 5 seconds. 2. The cooling fans continue to operate for about 60 seconds for cooling cycle and the
Summary of the content on the page No. 13
Installation Adjusting the Projected Image Adjusting the Projector Image Height The projector is equipped with an elevator foot for adjust- ing the image height. To raise the image: 1. Press the elevator button . 2. Raise the image to the desired height angle , then release the button to lock the elevator foot into position. To lower the image: 1. Press the elevator button. 2. Lower the image, then release the button to lock the elevator foot into position. 1 Elevator Button 2 Elev
Summary of the content on the page No. 14
Installation Adjusting the Projector Zoom / Focus You may turn the zoom ring to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 4.9 to 39.4 feet (1.5 to 12.0 meters). Zoom Ring Foctus Ring Adjusting Projection Image Size 304.9" (774.5cm) 203.3" (516.3cm) 177.9" (451.8cm) 127.1" 277.3" (322.7cm) (704.4cm) 76.2" 184.9" (193.6cm) 38.1" (469.6cm) 161.8" (96.8cm) (410.9cm) 115.6" (293.5cm) 69.3" 34.7" (176.1cm) (88.1c
Summary of the content on the page No. 15
User Controls Control Panel & Remote Control There are two ways for you to control the functions: Re- mote Control and Control Panel. Control Panel Remote Control Using the Control Panel Power Refer to the “Power On/Off the Projector” section on pages 11-12. Source Press “Source” to choose RGB, Component-p, Component-i, S-Video, Composite, DVI-D (Optional), Video and HDTV sources. Menu Press “Menu” to launch the on screen display (OSD) menu. To exit OSD,
Summary of the content on the page No. 16
User Controls Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 11-12. Empowering Key Press “e” key to launch e mnu on screen display screen and use to select items. Acer eView Management Press to launch “Acer eView Management” submenu. “Acer eView Management” is for display mode selection. Please refer to On Screen Display Menus section for more detail. Acer eTimer Management Press to launch “Acer eTimer Man
Summary of the content on the page No. 17
User Controls Keystone + / - Adjusts image distortion caused by tilting the projector (±16 degrees). Page Up (Computer mode only) Use this button to page up. This function is only available when the projector is connected to a computer via an USB cable. Page Down (Computer mode only) Use this button to page down. This function is only available when the projector is connected to a computer via an USB cable. Resync Automatically synchronizes the projector to the
Summary of the content on the page No. 18
User Controls On Screen Display Menus The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or Control Panel. When OSD is displayed, use keys to select any item in the 2. main menu. After selecting the desired main menu item, press to enter sub menu for feature setting
Summary of the content on the page No. 19
User Controls Language (Computer / Video Mode) Language Choose the multilingual OSD menu . Use the or key to select your prefered language. Press “Menu” on the Remote Control or Control Panel to finalize the selection. 19 ... English
Summary of the content on the page No. 20
User Controls Color (Computer / Video Mode) Display Mode There are many factory presets optimized for various types of images. Bright : For brightness optimization. PC : For computer or notebook. Video : For playing video in a bright environment. Theatre : For Home Theatre usage in a dark room. sRGB : For true-color optimization. User : Memorize user’s settings. Brightness Adjust the brightness of the image. Press the to darken image. Press the to lig
