Casio XJ-A141/XJ-A146* user manual

User manual for the device Casio XJ-A141/XJ-A146*

Device: Casio XJ-A141/XJ-A146*
Category: Projector
Manufacturer: Casio
Size: 1.01 MB
Added : 4/26/2013
Number of pages: 56
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Casio XJ-A141/XJ-A146*. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Casio XJ-A141/XJ-A146*.

For your convenience

If looking through the Casio XJ-A141/XJ-A146* user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Casio XJ-A141/XJ-A146* on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Casio XJ-A141/XJ-A146* to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Casio XJ-A141/XJ-A146* User manual - Online PDF
Advertisement
« Page 1 of 56 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Casio XJ-A141/XJ-A146* but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Casio XJ-A141/XJ-A146*. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

E
DATA PROJECTOR
*
XJ-A141/XJ-A146
*
XJ-A241/XJ-A246
*
XJ-A251/XJ-A256
* USB Port Models
User’s Guide
Be sure to read the precautions in the separate Setup Guide.
Be sure to keep all user documentation handy for future
reference.

Summary of the content on the page No. 2

DLP is a registered trademark of Texas Instruments of the United States. Microsoft, Windows, and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. XGA is a registered trademark of IBM Corporation of the United States. Other company and product names may be registered product names or trademarks o

Summary of the content on the page No. 3

Contents About this manual... ...............................................................................5 Projector Overview ......................................................... 6 Projector Features and Main Functions .................................................6 Remote Controller and Projector Keys...................................................8 Back Terminals.......................................................................................9 Loading Remote Controller Bat

Summary of the content on the page No. 4

Presentation Timer ...............................................................................21 Eco Mode (Power Saving, Low Noise) .................................................23 To select the Eco Mode............................................................................................. 23 Using the [FUNC] Key ..........................................................................24 Configuring Advanced Projector Settings.................. 25 Basic Setup Menu Operations ......

Summary of the content on the page No. 5

Projector Troubleshooting....................................................................47 Appendix ........................................................................ 49 Remote Controller Signal Range..........................................................49 Projection Distance and Screen Size ...................................................50 Aspect Ratio Setting and Projection Image .........................................51 Supported Signals...................................

Summary of the content on the page No. 6

Projector Overview This section describes the features of the projector, and explains the functions of the projector and remote controller keys. Projector Features and Main Functions XJ-A141/XJ-A146/XJ-A241/XJ-A246/XJ-A251/XJ-A256 Mercury-free Hybrid Light Source: A CASIO-original laser and LED hybrid light source delivers high luminance from 2,500 to 3,000 lumens. This projector does not use a mercury lamp, making it environmentally friendly. Slim and compact: A4 file size and approximately

Summary of the content on the page No. 7

XJ-A241/XJ-A246/XJ-A251/XJ-A256 WXGA Resolution: The XJ-A241/XJ-A246/XJ-A251/XJ-A256 models support WXGA (1280 × 800) resolution for optimal viewing of content formatted for today’s widescreen displays. This makes it perfect for projecting images from widescreen notebook PCs and HD video input sources. XJ-A146/XJ-A246/XJ-A256 Projection of Data from USB Memory or a Memory Card without a Computer: USB memory or a memory card (using a commercially available USB card reader) can be connected d

Summary of the content on the page No. 8

Remote Controller and Projector Keys Operations in this manual are presented based on the remote controller that comes with the projector. Major operation keys are also provided on the projector unit, so the most of the same procedures can also be performed directly on the projector. Remote Controller Keys [INPUT] key [MENU] key Remote control signal emitter [ZOOM +] [ZOOM –] keys CLASS 1 LED PRODUCT [FOCUS ] [FOCUS ] keys [P] (Power) key [TIMER] key [ESC] key Cursor keys ( / / / ) [ENTE

Summary of the content on the page No. 9

Back Terminals COMPUTER terminal Serial port* AV terminal Speaker Remote control signal receiver HDMI port Intake vents USB port Power connector (XJ-A146/XJ-A246/XJ-A256 only) Anti-theft lock hole * This serial port is for connecting a separately available special cable (YK-5) to control the projector from a computer. Loading Remote Controller Batteries Important! Be sure to use alkaline batteries only. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Caution * DISPOSE OF USED BAT

Summary of the content on the page No. 10

Setting Up the Projector Locate the projector on a desk, table, or stand that is firm and level. Make sure that you allow sufficient space around the sides and back of the projector for proper ventilation. The following illustrations show how the projector should be oriented for optimum projection relative to the screen. XJ-A141/XJ-A146 XJ-A241/XJ-A246/XJ-A251/XJ-A256 Screen Screen Make sure the projector is at a right angle to the screen. Position the projector so the lens side is at the edge

Summary of the content on the page No. 11

Connecting to an Image Output Device Connecting the Analog RGB Output of a Computer to the Projector Connect the projector’s COMPUTER terminal to the RGB terminal of a computer as shown in the illustration below. Important! Always turn off the projector and the computer before connecting them. Take care so the volume level of the computer is not set too high. Projector Computer AV terminal COMPUTER terminal To monitor terminal To line output terminal (analog RGB output terminal) Bundled mini

Summary of the content on the page No. 12

Connecting the HDMI Output of a Video Device or Computer to the Projector The projector supports projection and output of HDMI video and audio output from a computer or video device. Important! Turn off the projector and the computer or video device before connecting them. Projector Computer or video device HDMI port To HDMI output terminal HDMI cable (commercially available) You will need to obtain a commercially available HDMI cable with a connector that matches the terminal of the output

Summary of the content on the page No. 13

Connecting to a Video Device The projector is able to project images from the composite video output or component video output of a connected video device. Important! Always turn off the projector and the video device before connecting them. Connection to a composite video output Projector Video device AV terminal To video output To audio output terminal terminals Yellow Red White Bundled special AV cable You can use the bundled special AV cable to connect to a pin jack (RCA) type video outpu

Summary of the content on the page No. 14

Operation During Projection Selecting the Input Source Turning on the projector initially causes the same input source that was selected the last time it was turned off to be selected. To select a different input source 1. Press the [INPUT] key. This displays the input source selection screen. 2. Use the [ ] and [ ] keys to select the name of the input source you want to select and then press the [ENTER] key. The name of the input source you select appears in the upper right corner of the

Summary of the content on the page No. 15

Image Operations During Projection You can perform the following operations while projecting an image. Image brightness adjustment Manual keystone correction Color mode selection Image zooming Momentarily blanking the image and muting the audio Image freeze Pointer display in the projected image Aspect ratio switching Adjusting Image Brightness Note (for USB port model users) Use the setup menu (page 25) to adjust image brightness when the input source is an external device connected to

Summary of the content on the page No. 16

Selecting the Color Mode You can select from among various different color mode settings in accordance with image contents and projection conditions. Important! The color mode cannot be selected in the following cases. When “Off” is selected for the Eco Mode setting (page 23) To change the color mode 1. Press the [COLOR MODE] key. This displays the color mode selection window. The currently selected color mode is the one whose button is selected (filled in). 2. Use the [ ] and [ ] keys to

Summary of the content on the page No. 17

Momentarily Blanking the Image and Muting the Audio 1. Press the [BLANK] key. This temporarily blanks the image (projecting a black screen) and mutes the audio. 2. To resume normal image and sound, press the [BLANK] key (or [ESC] key). Note You can specify projection of a black screen or blue screen, or a logo. For details, see “Blank Screen” (page 37) under “Screen Settings Main Menu”. Freezing an Image Pressing the [FREEZE] key freezes the projected image. To freeze the projected image 1. Wh

Summary of the content on the page No. 18

Displaying a Pointer in the Projected Image You can select from among different pointer styles, including various arrow styles, for display in the projected image. Pointers can be used during a presentation to indicate or highlight a specific part of the image. Note Depending on the pointer style you are using, the pointer may not display properly when you are using keystone correction. If this happens, use the [KEYSTONE +] and [KEYSTONE –] keys to change the keystone correction value to zer

Summary of the content on the page No. 19

Changing the Aspect Ratio of the Projected Image Press the [ASPECT] key to cycle through the aspect ratio settings for the projected image. Available settings depend on your projector model as shown below. For details about the meaning of each setting, see “Aspect Ratio” (page 36) under “Screen Settings Main Menu”. XJ-A241/XJ-A246/XJ-A251/XJ-A256 Pressing the [ASPECT] key will cycle through settings in accordance with the current input source as shown below. Input Source Pressing [ASPECT] will

Summary of the content on the page No. 20

Adjusting the Volume Level You can use the remote controller keys to adjust the volume level of the audio that is output from the projector’s speaker or the AV terminal. To adjust the volume level 1. Press the [VOLUME] key. This causes the [Volume] screen to appear on the projected image. 2. Press the [ ] key to increase the volume, or the [ ] key to lower the volume. 3. After the setting is the way you want, press the [ESC] key. This causes the [Volume] screen to disappear. Note You also c


Alternative user manuals
# User manual Category Download
1 Casio Pro Xj-H1600 DlpXJH1600 User manual Projector 5
2 Casio XJ-A141 User manual Projector 14
3 Casio XJ-A146* User manual Projector 5
4 Casio XJ-A241 User manual Projector 14
5 Casio XJ-A256* User manual Projector 21
6 Casio XJ-A251 User manual Projector 34
7 Casio XJ-A246* User manual Projector 7
8 Casio XJ-M140/XJ-M145 User manual Projector 14
9 Casio Pro XJ-H1600 3D Ready DLPXJ-H1600 User manual Projector 0
10 Casio XJ-M150/XJ-M155 User manual Projector 9
11 Casio XJ-M240/XJ-M245 User manual Projector 16
12 Casio Short Throw Xj-St155 DlpXJST155 User manual Projector 3
13 Casio Signature DlpXJ-M140/XJ-M145* User manual Projector 3
14 Casio Signature DlpXJ-M150/XJ-M155* User manual Projector 0
15 Casio Signature Xj-M145 DlpXJM145 User manual Projector 0
16 Edelbrock 17930 User manual Projector 0
17 Sony BRIGHTERA VPL-FH30 User manual Projector 40
18 Sony 53S75 User manual Projector 4
19 Sony CX125 User manual Projector 12
20 Sony Cineza VPL-HS3 User manual Projector 63