Summary of the content on the page No. 1
P R O D U C T I N F O R M A T I O N G U I D E
EPSON
UPDATE
5/6/03
This package provides a new multimedia projector product section to be added to the
®
EPSON Product Information Guide. The table of contents of this section is listed below.
®
EPSON PowerLite 8300i
TABLE OF CONTENTS
Projector Specifications ................................................................................ EPSON PowerLite 8300i Projector - 1
Positioning the Projector .............................................
Summary of the content on the page No. 2
EPSON PowerLite 8300i Projector Control panel Projector Specifications Indicator lights General Speaker Type of display Poly-silicon Thin Film Transistor (TFT), active matrix Size of LCD panels Diagonal: 1.4 inch (35.6 mm) Lens F=1.7 to 2.2, f=53 to 72mm Resolution 1024 × 768 pixels (native format) Color reproduction 24 bit, 16.8 million colors Brightness Approx. 5200 or 3000 ANSI lumens (selectable using the Brightness Control Handle setting in the projector’s Advanced2 menu) IR receiver
Summary of the content on the page No. 3
EPSON PowerLite 8300i Projector Dimensions Compatible Video Formats Height 7.6 inches (193 mm) including feet You can use any of the following video sources: VCR, DVD player, camcorder, digital camera, gaming console, or laser Width 13.8 inches (350 mm) disc player. The projector supports composite video, S-video, Depth 19.3 inches (490 mm) component video, and RGB video, and it automatically senses Weight 24.7 lb (11.2 kg) the video format (HDTV, NTSC, PAL, or SECAM). The projector support
Summary of the content on the page No. 4
EPSON PowerLite 8300i Projector Mode Refresh Rate (Hz) Resolution Positioning the Projector SVGA—56 56 800 × 600 SVGA—60 60 800 × 600 ❏ Place the projector on a sturdy, level surface. SVGA—72 72 800 × 600 ❏ Make sure there is plenty of space for ventilation around SVGA—75 75 800 × 600 and under the projector. Do not set the projector on top of SVGA—85 85 800 × 600 loose papers that could block the vents under the projector. SVGA—120 120 800 × 600 ❏ Make sure the projector is within 10 feet of
Summary of the content on the page No. 5
EPSON PowerLite 8300i Projector If you place the projector between the top and bottom of the Note that the projector’s Computer 1, Computer 2, and BNC screen, you can use the Lens Shift to raise or lower the image ports accept a variety of input signals. If you’re connecting to (see page 8). one of these ports, you’ll need to make sure that the correct input signal setting is selected, or your image won’t display properly. Screen To change the input signal setting, do the following: Ideal
Summary of the content on the page No. 6
EPSON PowerLite 8300i Projector to Black (if it’s set to Blue or Logo, you won’t be able to Selecting the Image Source view images from a connected source after pressing A/V You can use the source buttons either on the projector or the Mute). remote control: ❏ You can also view images on the monitor while the ❏ The projector has two Source buttons. projector is in standby mode (plugged in but not turned Use the Computer/DVI button to switch between on), if the Standby Mode setting has been
Summary of the content on the page No. 7
EPSON PowerLite 8300i Projector Previewing Image Sources Troubleshooting Display Problems You can use the Preview function to help you select the image source. Follow these guidelines if you’re having trouble displaying an 1. Press Preview on the remote control. image. You Can’t Project an Image If you see a blank screen or a blue screen with the No Signal message, try the following: Preview ❏ Make sure the cables are connected correctly. ❏ Make sure the power light is green and not flashin
Summary of the content on the page No. 8
EPSON PowerLite 8300i Projector If you're using Macintosh OS X: If the Arrange option isn’t available, you may need to select one of the Simulscan resolution settings: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. Click the Monitor icon. 1. From the Apple menu, select System Preferences, then Click here select Displays. 2. Make sure the VGA Display or Color LCD dialog box is selected. 3. Click the Arrange (or Arrangem
Summary of the content on the page No. 9
EPSON PowerLite 8300i Projector Raising the Projector’s Feet Adjusting the Image If you need to raise the image further, you can incline the projector: Once you see your image, you may need to make certain 1. Stand behind the projector. Press the foot release buttons adjustments. on each side and lift the front of the projector. Focusing and Zooming Your Image Use the Focus buttons on the remote control (or on the projector) to sharpen the image. Use the Zoom buttons to reduce or enlarge t
Summary of the content on the page No. 10
EPSON PowerLite 8300i Projector Using Keystone Correction 5. Press the Enter button to select the corner you want to adjust. To adjust your image when the right and left sides are uneven, do one of the following: 6. Use the pointer button on the remote control (or the arrow buttons on the projector) to adjust the shape. ❏ Use the Keystone buttons on the projector’s control panel to adjust the image shape. 7. Repeat steps 5 and 6 as needed to adjust any remaining corners. 8. When done, pr
Summary of the content on the page No. 11
EPSON PowerLite 8300i Projector Shutting Down the Projector Using the Remote Control When you’ve finished using the projector, follow the The remote control lets you access your projector’s features recommended procedure to shut it down. This extends the life from anywhere in the room (up to 30 feet away). of the lamp and protects the projector from possible overheating. Turn on remote Note: When the projector has not received any input signals for 30 control before using minutes, it automa
Summary of the content on the page No. 12
EPSON PowerLite 8300i Projector Button Function Using the Control Panel Help Displays the on-screen help system. Source Press one of the Source buttons to switch to the equipment connected to the corresponding port (DVI, Comp1, Comp2, EasyMP, BNC, S-Video, or Video) Preview Lets you preview connected sources (see page 6). Preset Lets you select a preset selection of options for displaying computer images. Auto Optimizes a computer image. Focus Sharpens the image. Zoom Reduces or enlarges th
Summary of the content on the page No. 13
EPSON PowerLite 8300i Projector Controlling Multiple Projectors Managing Projectors from a Remote Computer If you’re using more than one projector, you can control all the projectors—or just selected ones—by using the projector The EasyManagement software lets you monitor and control ID system. To operate a projector, you have to set the remote projector(s) from a remote computer. These features are control’s ID to match that of the projector. Or you can intended for use by network admini
Summary of the content on the page No. 14
EPSON PowerLite 8300i Projector 5. If your network does not assign addresses automatically, Any projectors found on the network are listed as shown turn off DHCP and enter the projector’s IP Address, below: Subnet Mask, and Gateway Address, as needed. Note: To enter numbers using the remote control, press the Click here Num button until it lights, then use the number keypad. 6. After changing an address in the network menu, press the Enter button. This stores the value. 7. When done making
Summary of the content on the page No. 15
EPSON PowerLite 8300i Projector Controlling Your Projectors Your imported projectors are displayed as icons as shown: The control buttons in the upper-right of the EMP Monitor screen let you turn on and off the projectors and select video sources. (Hold the mouse pointer over a button to see a description of its meaning.) Make sure you’ve selected the projector(s) you want to operate (with the mouse pointer) before clicking one of the buttons. 3. If you’d like to register a projector manua
Summary of the content on the page No. 16
EPSON PowerLite 8300i Projector 3. EMP NetworkManager connects to the projector, and you 11. When you see the test message window, you can send a see this screen: message with the heading “TEST MAIL” to the addresses you have entered. The projector’s name and IP address are included in the body of the message. 12. When done making all your projector settings, close the EMP NetworkManager. (It does not have to be open for messages to be sent or received.) Understanding the E-mail Messages I
Summary of the content on the page No. 17
EPSON PowerLite 8300i Projector Light Description and solution Projector Status Lights When the power and temperature lights Red s are flashing, the projector is getting too Power light hot, but you can continue running it in this condition. Lamp light Verify that the air filter is not clogged. Temperature light Orange Clean or replace it as described on page 17. Make sure the room temperature is not above 95 °F (35 °C) and there is plenty of space around and under the projector for vent
Summary of the content on the page No. 18
EPSON PowerLite 8300i Projector 3. If the dirt is difficult to remove or a filter is broken, replace Cleaning the Lens the filters as described below. Contact your dealer or call EPSON at (800) 873-7766 in the United States to obtain Clean the lens whenever you notice dirt or dust on the surface. new ones. In Canada, please call (800) 463-7766 for dealer referral. ❏ Use a canister of compressed air to remove dust. Note: When you replace the lamp, new filters are included ❏ To remove dirt
Summary of the content on the page No. 19
EPSON PowerLite 8300i Projector 4. Loosen the lamp cover screws (you don’t need to take them Replacing the Lamp out all the way). Then remove the cover. The projection lamp typically lasts for about 3000 hours in low-brightness mode, or 2000 hours in high-brightness mode. Note: The brightness setting can be changed by selecting Brightness Control in the projector’s Advanced2 menu. It is time to replace the lamp when: ❏ The projected image gets darker or starts to deteriorate. ❏ The message L
Summary of the content on the page No. 20
EPSON PowerLite 8300i Projector Optional Accessories Related Documentation CPD-16107 EPSON PowerLite 8300i User’s Guide Product Product no. Replacement lamp (includes air filters) V13H010L23 CPD-16108 EPSON PowerLite 8300i Quick Setup sheet Air filter set V13H134A02 Mounting hardware: Ceiling mount ELPMB41 Suspension adapter ELPMBAPL False ceiling plate ELPMBFCP Projection screens: 50-inch portable screen ELPSC06 60-inch portable pop-up screen ELPSC07 80-inch portable pop-up screen ELPSC08 Lense
