Summary of the content on the page No. 1
IN3902LB, IN3904LB
Regulatory models: W3902, W3904
010-0728-02
Summary of the content on the page No. 2
Declaration of Conformity FCC Warning Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Portland, OR This device complies with part 15 of the FCC Rules. Operation is subject to 97223-8368, USA the following two conditions: (1) This device may not cause harmful We declare under our sole responsibility that this projector conforms to the interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. following directiv
Summary of the content on the page No. 3
Using Network Functions 38 Table of Contents Using LitePort 42 Introduction 4 Maintenance 45 Positioning the projector 6 Cleaning the lens 45 Connecting a computer source 7 Replacing the projection lamp 46 DisplayLink or VGA 7 Using the security lock 47 Optional computer connections 8 Displaying an image 9 Adjusting the image 10 Connecting a video device 12 Video device connections 12 Composite video connection 12 HDMI 1.3 connection 12 S-video connection 12 VGA connection 12 Component video con
Summary of the content on the page No. 4
8’/2.4m 2’/0.6m • Refer all service to qualified service personnel. Servicing your own Important Operating Considerations for Safety projector can be dangerous to you and will void the warranty. • Refer to this guide for proper startup and shutdown procedures. • Only use replacement parts specified by InFocus. Unauthorized • Follow all warnings and cautions in this manual and on the projector. substitutions may result in fire, electrical shock, or injury, and may • Place the projector in a h
Summary of the content on the page No. 5
Introduction Your new digital projector is simple to connect, easy to use, and straightforward to maintain. It is a versatile projector that is flexible enough zoom (rear ring) for business presentations and home video viewing too. The IN3902LB has touch keypad native XGA 1024x768 resolution, and the IN3904LB has WXGA 1280x800 focus (front ring) resolution. This guide applies to all products. They are compatible with a wide variety of computers and video devices. Product specifications remot
Summary of the content on the page No. 6
Connector panel The projector provides both computer and video connection options, including: composite •VGA computer (2) video monitor out HDMI •HDMI audio in S-video computer •S-video •Composite video • Separate assignable audio inputs for video and computer composite s-video VGA 1 VGA 2 VGA 1/2 composite s-video • USB DisplayLink connector, for computer audio/video input. This USB connection also provides slide advance (and mouse control when used with an optional remote control only) Th
Summary of the content on the page No. 7
Positioning the projector (IN3902LB) (IN3904LB) 10 ft high image 10 ft high image To determine where to position the projector, consider the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some general guidelines: Projection angle Projection angle bottom of image bottom of image 1.5 ft above center 1.24 ft above center • Position the projector on a flat surface at a right angle to the screen.
Summary of the content on the page No. 8
Connecting a computer source DisplayLink or VGA connect USB cable If you have a Windows or Macintosh computer, connect the USB cable between your computer's USB port and the projector's DisplayLink connector*. Then to begin installation of the DisplayLink software: Windows: Follow the instructions on the screen. MOLEX Macintosh: A folder will open containing a file named DisplayLink MOLEX Installer.pkg. Open that file and follow the instructions on the screen. * For detailed DisplayLink instr
Summary of the content on the page No. 9
Optional computer connections To get sound from the projector, connect an audio cable (optional cable, not connect audio cable included) to your computer and to the Audio In Computer connector on the projector. You may also need an adapter. If you are using a desktop computer and want to see the image on your computer screen as well as on the projection screen, connect the computer’s monitor cable to the Monitor Out connector on the projector. NOTE: Only VGA video is sent to the Monitor out
Summary of the content on the page No. 10
Displaying an image press Power button Touch the Power button. The Power button blinks green and the fans start to run. When the lamp comes on, the start up screen displays and the Power button is steady green. It can take a minute for the image to achieve full brightness. ? No start up screen? Get help on on page 19. turn on computer or Turn on your computer or video device. video device The image should appear on the projection screen. If it doesn’t, press the Source button on the projecto
Summary of the content on the page No. 11
Adjusting the image adjust height If necessary, adjust the height of the projector by pressing the elevator foot release button to extend the foot. release button If necessary, rotate the leveling foot located at the rear of the projector. Avoid placing your hands near the hot exhaust vent at the side of the elevator foot projector. Position the projector the desired distance from the screen at a 90 degree adjust distance angle to the screen. See the table listing screen sizes and distances o
Summary of the content on the page No. 12
What is Aspect Ratio? 4:3 screen 16:9 screen Aspect ratio is the ratio of the image width to image height. Standard TV screens and older laptops are 4:3; HDTV and most DVDs are 16:9; and widescreen computers are 16:10. If you are projecting onto a screen, the size/shape of the screen will influence the aspect ratio you decide to use. If 4:3 you are projecting onto a blank wall, there are no screen size restrictions. mode What you plan to project will also help you choose between 4:3, 16:9
Summary of the content on the page No. 13
HDMI 1.3 connection Connecting a video device HDMI is a standard, uncompressed, all-digital audio/video interface. You can connect video devices such as VCRs, DVD players, camcorders, HDMI provides an interface between sources, such as set-top boxes, DVD digital cameras, video game consoles, HDTV receivers, and TV tuners to the players, and receivers and your projector. Plug an HDMI cable into the projector. You can connect the audio directly to the projector to get sound video-out connect
Summary of the content on the page No. 14
sure the computer is powered on). The battery light will stay on while the LiteBoard™ Wand battery is charging, then it will turn off when the battery is fully charged. The LiteBoard Wand works like a wireless mouse - but one that works in When charging is finished, you can disconnect the USB cable (or keep the midair, not on your desktop. Just hold the wand in your hand, and point it cable connected and use the wand while it’s charging). at the projected image to point, click and drag. The
Summary of the content on the page No. 15
NOTE: See LiteBoard Wand Menu below for settings that let you fine-tune wand motion and clicking behavior. When you’re done, set the wand aside and make sure it isn’t pointing at the screen; it will turn itself off automatically after 1 minute. If you have problems, see Troubleshooting (below). Wand Position and Avoiding Shadows Your Location Distance from the Screen You can use the LiteBoard Wand right up against the screen, or around the room. You might find that your pointing accuracy wil
Summary of the content on the page No. 16
Reset Button Buttons and Wand Tip The wand's three top buttons are equivalent to the left (labeled 'L'), right The wand has a reset button, behind a small hole on its underside. Under (labeled 'R'), and middle (labeled 'M') buttons on a mouse. The wand's tip is normal conditions, you should not need to reset the wand. See the also a button, and it's also equivalent to the left mouse button. NOTE: By Troubleshooting section below for more information. default, the M button changes wand motion b
Summary of the content on the page No. 17
Motion: controls wand motion. When set to Normal, motion is set up to - Make sure the wand is not pointing at a shadow and make sure its tip work best for normal computer use. When set to Draw, motion is set up to is not in a shadow. work best for on-screen drawing. When set to Stable, motion is filtered for - If the room is brightly lit, reduce the room illumination. maximum stability. When set to Press to Move, the mouse pointer only - If you're trying to use the computer's mouse at the sa
Summary of the content on the page No. 18
On Macintosh: Select System Preferences from the Apple Menu, then select Displays. Click Arrangement, and check “Mirror Displays.” • If the battery light does not turn on when the wand is being charged, try one of the following: - Make sure a USB cable is connected between the wand and either the USB power adapter, or a USB port on your computer. - If the wand is connected to the USB power adapter, make sure the adapter is plugged in to a live electrical outlet. If the wand is connected to
Summary of the content on the page No. 19
The Status Indicator Panel on top of the projector indicates the state of the Shutting down the projector projector and can help you troubleshoot. The projector automatically displays a black screen after no active source is detected for 30 minutes. This black screen helps preserve the life of the projector. The image returns when an active source is detected or a remote or keypad button is pressed. Table 3: Status indicator light behavior and meaning Screen Save Time You can make the black
Summary of the content on the page No. 20
A A Problem Solution Result No start up screen Correct image Plug power cord into the projector and press power button. If your computer is using the projector's DisplayLink Computer image projected Only start up screen appears connector, see the DisplayLink Software User's Guide for troubleshooting information. Press the Source button activate laptop’s external port Restart laptop 19 Startup Screen Startup Screen A A
