Mitsubishi Electronics X490 user manual

User manual for the device Mitsubishi Electronics X490

Device: Mitsubishi Electronics X490
Category: Projector
Manufacturer: Mitsubishi Electronics
Size: 0.72 MB
Added : 1/4/2014
Number of pages: 36
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Mitsubishi Electronics X490. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Mitsubishi Electronics X490.

For your convenience

If looking through the Mitsubishi Electronics X490 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Mitsubishi Electronics X490 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Mitsubishi Electronics X490 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Mitsubishi Electronics X490 User manual - Online PDF
Advertisement
« Page 1 of 36 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Mitsubishi Electronics X490 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Mitsubishi Electronics X490. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

LCD
Projector
User Manual
X500
X490
S490
MODEL X500U / X490U / S490U
EN – 1
ESPAÑOL ITALIANO DEUTSCH FRANÇAIS ENGLISH

Summary of the content on the page No. 2

For X500U only COMPLIANCE NOTICE OF FCC This equipment has been tested and found to comply with the CAUTION RISK OF ELECTRIC SHOCK limits for a Class A digital device, pursuant to Part 15 of the DO NOT OPEN FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment gener- COUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, ates, uses, and can radiate radio frequency energy and,

Summary of the content on the page No. 3

Contents Important safeguards ...........................................................................4 Overview ............................................................................................... 6 Using the remote control ......................................................................8 Battery installation ......................................................................................................... 8 Installation ...............................................

Summary of the content on the page No. 4

Important safeguards Please read all these instructions regarding your LCD 10. Power sources This projector should be operated only from the projector and retain them for future reference. Follow type of power source indicated on the marking all warnings and instructions marked on the LCD pro- label. If you are not sure of the type of power, jector. please consult your appliance dealer or local power company. 1. Read instructions All the safety and operating instructions should 11. Power-cord pr

Summary of the content on the page No. 5

WARNING: Place of installation For safety’s sake, refrain from setting the projector at Unplug immediately if there is something any place subjected to high temperature and high wrong with your projector. humidity. Please maintain an operating temperature, Do not operate if smoke, strange noise or odor comes humidity, and altitude as specified below. out of your projector. It might cause fire or electric • Operating temperature: between +41°F (+5°C) and shock. In this case, unplug immediately an

Summary of the content on the page No. 6

Overview 1 Foot adjustment buttons (Left/Right) 5 97 8 6 2 Terminal board 3 HUB 4 Air outlet grille 5 Speakers (Left/Right) 6 Control panel 7 Remote control sensor (Front) 8 IRIS sensor 9 Lens 10 Remote control sensor (Rear) 11 Kensington Security Lock Standard 2 34 1 connector 12 Easy-carry handle 10 11 12 Control panel 1 Power button 15 14 13 2 – (VOLUME) button 3 COMPUTER button 4 MENU button LAMP TEMP 1 12 5 AUTO POSITION button ZOOM/ FOCUS 6 MUTE button 2 11 VOLUME 7 Direction buttons COMPU

Summary of the content on the page No. 7

Bottom side 1 1 Adjustment foot (Left/Right) 2 Air inlet cover 3 Lamp cover Caution: Do not replace the lamp right after using the projector. The lamp will be very hot. 2 3 1 Power button Remote control 2 COMPUTER button 3 AUTO POSITION button 4 MENU button 5 Right click button (For mouse) 6 EXPAND button KEYSTONE 18 7 PinP button 1 ZOOM/ COMPUTER VIDEO FOCUS 17 8 Wired remote control jack 2 16 AUTO 9 MUTE (Audio/Video) button POSITION VOLME 10 STILL button 3 15 11 Direction buttons MENU LASER 4

Summary of the content on the page No. 8

Using the remote control Battery installation Use two AA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). 3. Replace the back cover. 12 3 Important: • Do not use a new battery with an old one. • Load batteries in the correct position. • Do not heat, take apart, or throw batteries into fire. • Do not try to recharge batteri

Summary of the content on the page No. 9

H Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection Width To find the approximate distance Screen A B between the projector and screen: Multiply the width of the screen Screen x 1.8 (min.) , Multiply the width of the screen x 2.4 (max.). A=B • Refer to the chart for recom- mended distances in maximum (between the screen and L the head of the projector) zoom and minimum zoom. Distance from scre

Summary of the content on the page No. 10

Basic connections This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal com- puters having analog RGB output. Important: • Make sure that your equipment is turned off before connection. • Plug in firmly and unplug by holding the plug, not by pulling the main power cable. • If connected units are set too close to one another, the image may be affected. • Refer to the owner's guide of each component for details of connections. Projector + AV equi

Summary of the content on the page No. 11

Projector + Personal computer For computer with Mini D-SUB 15P terminal (IBM PC or IBM PC compatibles etc.) RGB cable for PC to COMPUTER IN (Mini D-SUB 15P) computer USB RS-232C INPUT SELECT COMPUTER 1 IN AUDIO 1 IN REMOTE VIDEO 1 IN VIDEO 2 IN DIGITAL ANALOG COMPUTER 2 IN AUDIO 2 IN S-VIDEO MAIN VIDEO OI COMPUTER OUT AUDIO OUT AC IN L AUDIO to monitor R port to COMPUTER to COMPUTER AUDIO IN AUDIO OUT to PC audio OUT MONITOR OUTPUT output PC audio cable (option) RGB cable for PC (opti

Summary of the content on the page No. 12

Preparing the projector for operation Getting ready for projection Adjusting the angle of projection 1. Connect the power cord provided to the projector. For the best result, project onto a flat screen with a 90 2. Connect the power cord to the wall power outlet. degree angle to the floor. If necessary, tilt the projector 3. Remove the lens cap. by adjusting two foot adjustments on the bottom of the projector. Warning: • Do not look directly into the lens when projector is “ON”. • The lens cap i

Summary of the content on the page No. 13

To operate projector power ON USB RS-232C INPUT SELECT COMPUTER 1 IN AUDIO 1 IN REMOTE VIDEO 1 IN VIDEO 2 IN DIGITAL ANALOG COMPUTER 2 IN AUDIO 2 IN S-VIDEO MAIN VIDEO 3 , 9 , 10 OI KEYSTONE COMPUTER OUT AUDIO OUT AC IN L AUDIO COMPUTER ZOOM/ VIDEO FOCUS 8 R AUTO POSITION VOLUME 4 , 6 AUTO POSITION button MENU LASER 5 , 7 2 , 11 LAMP TEMP 3 , 9 , 10 ZOOM/ FOCUS 4 , 6 RIGHT CLICK VOLUME 5 , 7 COMPUTER KEYSTONE VIDEO ENTER 8 8 MENU ENTER EXPAND P in P STILL MUTE button MUTE AUTO MUTE POS

Summary of the content on the page No. 14

To operate projector power ON (Continue) AV mute Turning off the projector Image and audio are temporarily muted by pressing 9. Press the POWER button. the MUTE button. To restore the image and audio to The message “POWER OFF? YES : PRESS AGAIN” the normal mode, press the MUTE button again. appears on the screen. • The audio from the AUDIO OUT jack is also muted • To exit from this mode, press any button except by pressing the MUTE button. the POWER button. (Some buttons on the remote control d

Summary of the content on the page No. 15

Menu operation IMAGE CONTRAST ± 30 RED ± 30 BRIGHTNESS ± 30 YELLOW ± 30 sRGB ON , OFF GREEN ± 30 *1 COLOR MATRIX VIDEO CYAN ± 30 COMPUTER BLUE ± 30 USER MAGENTA ± 30 OFF SATURATION ± 5 COLOR TEMP. STANDARD CONTRAST R ± 30 HIGH CONTRAST B ± 30 LOW BRIGHTNESS R ± 30 USER BRIGHTNESS B ± 30 COLOR ± 10 (Displays only when the source is selected to VIDEO) *2 TINT ± 10 (Displays only when the source is selected to VIDEO) SHARPNESS ± 10 INSTALLATION IRIS 1, 2, 3, OFF AUTO POWER ON ON , OFF AUTO POWER

Summary of the content on the page No. 16

Menu operation (continued) 1 IMAGE CONTRAST ......... Adjusts the picture contrast. The contrast becomes higher as the opt. XGA60 number increases. IMAGE BRIGHTNESS ..... Adjusts the image brightness. The image becomes brighter as CONTRAST 0 the number increases. BRIGHTNESS 0 sRGB .................... Select ON to display an image emphasizing on the color sRGB OFF reproducibility. • When sRGB is ON, COLOR MATRIX can’t be adjusted. COLOR MATRIX COMPUTER • When sRGB is OFF, the image will become d

Summary of the content on the page No. 17

ANAMORPHIC .... Select ON when playing DVD discs containing data of letterboxed images. LANGUAGE ........ Use to select the language used in the menus. ( / English / Español / Deutsch / Français / Italiano / ) RESET ALL ......... Use to reset the MENU settings (except LANGUAGE). • When the LANGUAGE in FEATURE menu is set to English and NTSC video format is selected, the brightness is decreased 15 points by set-up cancel function for U.S. (The indicated value is not changed.) The image becomes da

Summary of the content on the page No. 18

Picture adjustment Adjusting the image 5. Press the $ or % button to adjust the color balance You can adjust the picture by using the IMAGE menu. of the color. 6. Repeat steps 4 and 5 for more adjustments. opt. XGA60 7. Exit the menu system by pressing the MENU but- IMAGE ton several times. CONTRAST 0 BRIGHTNESS 0 • When using the setting which has been already OFF prepared, select desired position VIDEO or sRGB COMPUTER in step 2. When the source is selected COLOR MATRIX COMPUTER to VIDEO or

Summary of the content on the page No. 19

Top part of image curves : Adjustment from personal computer Change the setting of HOLD in SIGNAL menu. Although this projector sets proper signal systems Select ON , press the ENTER button and adjust automatically for the image signal from personal BEGIN or END for image which top part is the least computers, it cannot be applied to some of personal curved. computers. In this case, press the AUTO POSITION button. If the images are still not projected correctly, Image does not move naturally :

Summary of the content on the page No. 20

Advanced features for presentation REAL screen display Expand • During REAL mode, Press the $ or % buttons By pressing the EXPAND button on the remote con- for fine adjustment. trol, you can magnify the detailed image of the picture. • During REAL mode, the { and } buttons are You can also view the screen displaying the picture as not working. At this time, the prohibition mark its original size (native resolution display). ( ) appeares on the screen. • The expanding rate cannot be changed by pr


Alternative user manuals
# User manual Category Download
1 Mitsubishi Electronics ColorView SL25U User manual Projector 29
2 Mitsubishi Electronics ColorView XL4U User manual Projector 4
3 Mitsubishi Electronics ColorView XD480U User manual Projector 23
4 Mitsubishi Electronics ColorView XL25U User manual Projector 9
5 Mitsubishi Electronics ColorView XD450U User manual Projector 27
6 Mitsubishi Electronics ColorView SL4U User manual Projector 8
7 Mitsubishi Electronics ColorView XL30U User manual Projector 13
8 Mitsubishi Electronics ColorView XL5950U User manual Projector 24
9 Mitsubishi Electronics ColorView SL4SU User manual Projector 60
10 Mitsubishi Electronics DLP ES200U User manual Projector 51
11 Mitsubishi Electronics ColorView XL8U User manual Projector 16
12 Mitsubishi Electronics DLP EX200U User manual Projector 39
13 Mitsubishi Electronics DATA User manual Projector 1
14 Mitsubishi Electronics ColorView XL5U User manual Projector 35
15 Mitsubishi Electronics DLP XD460U User manual Projector 72
16 Edelbrock 17930 User manual Projector 0
17 Sony BRIGHTERA VPL-FH30 User manual Projector 40
18 Sony 53S75 User manual Projector 4
19 Sony CX125 User manual Projector 12
20 Sony Cineza VPL-HS3 User manual Projector 63